Niche Zero Manuale utente

Niche Zero User Manual

Niche Zero Manual 1

Contents 2

Important Safeguards 3-5

Electrical safety 6

Trouble shoong 7

First use of Niche Zero 8

Using the Niche Zero 9-10

Care and Cleaning 11-14

Guarantee 15-16

Contents

Important Safeguards

When using electrical appliances, basic safety precauons should

always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE

REFERENCE

WARNING: Misuse of this

appliance may cause injury.

1. Before using for the rst

me please ensure that

your electricity supply is the

same as shown on the rang

label on the underside of the

Niche Zero. If you have any

concerns, please contact your

local electricity company.

2. Never use a plug without the

fuse cover ed. Always make

sure a replacement fuse is the

same rang as the original.

3. If the supply cord or plug is

damaged, or if the appliance

malfuncons or has been

damaged in any manner; it

must be replaced or repaired

by the manufacturer, its

service agent or similarly

qualied persons in order to

avoid a hazard.

4. Replacement fuses should

be approved to BS 1362

(UK only).

5. Any plug cut from its power

supply cord should be

disposed of immediately.

Inserng a cut-o plug into an

electrical socket is dangerous.

6. The Niche Zero features an

overheat cut-out that cuts the

power if it becomes too hot

for any reason. If this occurs,

unplug the grinder. The safety

cut-out will automacally

reset itself within 1 hour and

the power will be restored

when the Niche Zero is

plugged in again.

7. Do not place the Niche Zero

on or near a hot gas or electric

burner, or where it could

touch a heated surface.

Important Safeguards

8. Any signicant spillage

onto the surface under or

around the Niche Zero, or

onto the Niche Zero itself,

should be cleaned and

dried before connuing to

use the Niche Zero.

9. To protect against electric

shock and damage do not

immerse any part of the

Niche Zero in water or allow

moisture to come in contact

with these parts. Do not

operate the Niche Zero on a

sink draining board.

10. The burrs are extremely

sharp; take extra care when

handling these internal parts,

especially when removing

from the body during

cleaning. Avoid touching the

sharp edges.

11. To avoid suocaon and

choking hazard for young

children, remove and safely

dispose of the protecve

cover ed on the power plug

pins and any plasc bags.

12. Avoid contact with

moving parts.

13. The Niche Zero Grinder can

be used by adult persons

with reduced physical,

sensory or mental capabilies

or lack of experience and

knowledge, if they have

been given supervision or

instrucon concerning use of

the Niche Zero Grinder in a

safe way and understand the

hazards involved.

14. The Niche Zero must not

be used or played with by

children. Keep the Niche Zero

and its cord out of the reach

of children.

15. Always make sure the Niche

Zero is properly assembled

before use. The Niche Zero

will not operate unless

properly assembled and the

lid is closed.

16. Do not aempt to operate

the Niche Zero by any

method other than for which

it is intended and described

in this booklet.

Important Safeguards

17. The Niche Zero is not intended

to be operated by means of

an external mer or separate

remote control system.

18. The use of aachments not

recommended or sold by

Niche may cause re, electric

shock or injury.

19. Check your beans in the bean

funnel for the presence of

foreign objects before using.

20. The Niche Zero is for

household use only. Do

not use the Niche Zero for

anything other than its

intended use. Misuse may

cause injury. If the Niche Zero

is used improperly or not

used in accordance with these

instrucons, the guarantee

will become invalid and

Niche refuses any liability for

damage caused.

21. Do not place the Niche Zero

near the edge of a bench

or table during operaon.

Ensure the surface is level,

clean and free of water. Do

not let the power cord hang

over the edge of a table,

counter, touch hot surfaces or

become knoed.

22. The Niche Zero is designed

to only grind whole roasted

coee beans. Do not aempt

to grind any other foodstus

including herbs, spices and

pre-ground coee.

23. Always disconnect the Niche

Zero from the supply if it is

le unaended and before

assembling, disassembling or

cleaning. To unplug it, hold

the plug and pull it out of the

socket. Never pull it out by the

power cord.

24. Do not put the Niche Zero,

or any of its parts in the

dishwasher.

25. Keep the Niche Zero clean.

Refer to Care and Cleaning.

26. Do not use the Niche Zero

outdoors.

27. Never tamper with the safety

systems. They are included for

your personal safety.

Electrical requirements

UK, EU and Australia: 220-240 Volts A.C. 50-60 Hz

US: 110-120 Volts A.C 50-60Hz

NOTE: The Niche Zero grinder has a

grounded/earthed plug. To reduce the risk

of electrical shock, this plug will t in an

outlet only one way. If the plug does not t

in the outlet, contact a qualied electrician.

Do not modify the plug in any way. A

power-supply cord storage area is provided

inside the Niche Zero to reduce the risk

resulng from the power cord becoming

entangled or tripping over a longer cord.

If a longer extension cord is used:

The marked electrical rang of the extension cord should be at least

as great as the electrical rang of the Niche Zero. The extension cord

should be a grounding-type cord. The cord should be arranged so

it will not drape over the countertop or table top where it can be

pulled on by children or tripped over.

The symbol shown indicates that this appliance

should not be disposed of in normal household

waste. It should be taken to a local authority

waste collecon centre designated for this

purpose. For more informaon, please contact

your local council oce.

Troubleshoong

Niche Zero does not run when switched on:

Check to see if the Niche Zero is plugged into a grounded outlet and the

lid is closed. If it is, unplug the Niche Zero, then plug it back in again. If

the Niche Zero sll does not work, check the plug fuse or circuit breaker

on the electrical circuit the Niche Zero is connected to and make sure the

circuit is closed. If the Niche Zero does not run aer taking these steps, a

foreign object may be jamming the cung burrs. See “Care and Cleaning”

for more informaon.

Niche Zero runs when switched on but coee does not grind:

The burrs require cleaning or are worn. Also check that the grind seng

isn’t set to calibrated as this means the burrs are touching.

See “Care and Cleaning” for more informaon.

Niche Zero is operang normally, but stops abruptly:

Immediately turn o the Niche Zero. A foreign object, such as a pebble,

piece of metal or twig, may have jammed the burrs.

See “Care and Cleaning” for more informaon.

Grind size seems incorrect for chosen seng:

Check the Niche Zero is correctly calibrated.

See recalibraon of Niche Zero in “Care and Cleaning”.

Cord does not pull out from base:

Unplug the Niche Zero. Unscrew and remove the wooden base cover and

check that cord has not knoed. Extend cord, replace wooden base cover

then push cord back into base.

First Use of Niche Zero

WARNING: do not use when set to calibrated as you will damage the burrs.

There may be coee residue in your grinder. If there is, this is from tesng

to make sure your grinder performs to its best.

If you require an extra coarse seng, you are able to connue rotang the

bean funnel an-clockwise unl you reach your chosen seng.

Please note that the grind size markings are only a guide. We recommend

you nd the right sengs that work for you.

Using the Niche Zero

Before use remove all packaging.

Plug into outlet, the red LED will glow to show there is power to the Niche

Zero. Your Niche Zero has been factory calibrated and adjusted to seng 20.

1. Open lid and rotate the bean

funnel to the desired grind

seng, matching white dot

on bezel to grind dial number.

Turn clockwise to go ner

(espresso) and anclockwise to

go coarser (press pot). Ensure

you do this with no beans in the

grinder funnel as shown. When

adjusng ner aer coarse

grinding, run the Niche Zero

briey (1 second) every me

the adjustment ring is moved 10

marks on the scale. This ensures

any trapped coee between

the burrs does not strain the

adjustment mechanism and

makes adjusng easier. When

adjusng coarser, the above

procedure is unnecessary.

2. Weigh beans in grind cup, be

vigilant and inspect the beans

to ensure no foreign objects,

that could damage the burrs.

This is also the me to remove

any defecve beans such as

quakers (unusually light beans

compared to others) and blacks

(very dark beans). This all helps

taste in the cup.

3. Open lid and pour beans in

bean funnel.

Using the Niche Zero

4. Replace grind cup on

tray underneath.

5. Close lid (Niche Zero will

not operate if the lid is

open) and ick power

switch up, to switch on.

6. You will hear a change in

motor noise when the Niche

Zero has nished grinding.

We recommend to leave it

running for a few more seconds,

to make sure all the beans

have been processed, before

switching o.

7. For espresso, t portalter

over grind cup.

8. Invert grind cup and

portalter, shake and tap

grind cup, then remove.

9. For other brewing methods,

pour ground coee direct

from grind cup into chosen

receptacle.

Indice

Altri manuali Niche Macinacaffè

Niche

Niche Duo Manuale utente

Manuali Macinacaffè popolari di altre marche

SOLAC

SOLAC All4Coffee MC6253 Manuale utente

Teesa

Teesa TSA4011 Manuale utente

Somogyi Elektronic

Somogyi Elektronic home HG KD 40 Manuale utente

tomado

tomado TM-1287 Manuale utente

Aicok

Aicok CG9220 Manuale utente

Zelmer

Zelmer ZCG7925 Manuale utente

Baratza

Baratza Vario Manuale utente

Baratza

Baratza Forté Manuale utente

Isomac

Isomac ROBY Manuale utente

Eldom

Eldom Dott MK60 Manuale utente

Bunn

Bunn SAFETY-FRESH 1 GPR Manuale utente

Baratza

Baratza Forté AP Manuale utente

FAMITEC

FAMITEC BOLD Manuale utente

Santos

Santos SC55 Istruzioni operative

Lumme

Lumme LU-2601 Manuale utente

TREVIDEA

TREVIDEA Girmi MC02 Manuale utente

Eureka

Eureka Zenith E Manuale di istruzioni

Baratza

Baratza Maestro Manuale utente