Nierbo UT300 Manuale utente



USER’S GUIDE



User Manual of Digital Projector

FCC Statement

The equipment has been verified upon test to meet the requirements for restrictions on grade-B

digital equipment in Part 15 of FCC Rules. Such restrictions aim to provide reasonable protection in

the installation in residential area to prevent harmful interference. The failure of installation and use

by the instructions may cause harmful interference to wireless communication. However, the

Company does not guarantee no interference in particular installation conditions. If the equipment

do imposes harmful interference on radio or television receiving (determined through shutdown and

then starting of the equipment with doubt), it is suggested that users try to take one or several

measures as below to eliminate the interference:

•Adjust the direction or position of receiving antenna

•Increase the distance between the equipment and the receiver

•Connect the equipment and the received with different circuit sockets

•Consult the distributor or experienced professional radio/television technicians for help.

The equipment meets the requirements of Part 15 of FCC Rules. The operation meets the two

conditions as below:

1. The equipment shall not cause harmful interference.

2. The equipment shall be capable of bearing any interference, including the interference which may

cause unexpected operation.

Safety Instructions

Before the use of the projector, please read and take good care of all the guidance and instructions

for future reference.

1. Instructions for reading guidance

Please read all the guidance and instructions for safety and use before using the equipment.

2. Notice and warning

Please follow all the notices and warnings in the guidance and instructions for use.

3. Cleaning

Pull out power plug of the projector from wall-mounted power socket before cleaning. Wipe

projector shell with wet cloth. Please do not use liquid or spray detergent.

4. Accessory

Do not put the project on unstable cart, rack or desk. The product may drop down to cause

serious damage.

Put plastic wrappage (of the projector, accessories and optional parts) out of reach by children

to prevent death by suffocation. Please pay special attention for infants.

5. Ventilation

The projector is equipped with intake and exhaust holes. Please do not block the openings or

put any

article near the holes to prevent possible internal heat accumulation, which may cause picture

quality degradation or damage to the projector.

6. Power supply

Please confirm that working pressure of the projector is the same with the voltage of your local

power supply.

7. Repair

Please do not try to repair the projector by yourself. Do entrust professional technicians for

repair.

8. Component replacement.

When necessary to replace components, please do use the components for replacement

designated by the manufacturer. Unauthorized replacement may cause fire accident, electric

shock or other hazards.

9. Steam condensation.

Do not use the projector immediately after moving the projector from a cold place to a warm

place. Moisture may condense at the lens and internal key components in case the projector is

in temperature change. To prevent damage to the projector, please wait for at least 2h before

use in case of sharp or sudden temperature change.

The projector only applies to safe use below altitude 2,000m, and the use above altitude

2,000m may cause safety hazard.

Notices for AC Power Wire

AC power wire must meet relevant requirements of the country (region) where you use the project.

Please refer to the figure below to confirm plug type of the AC power wire used and ensure the use

of correct AC power wire. If attached AC power wire is not suitable for the AC power socket used,

please consult the distributor. The projector is equipped with grounded AC power plug. Please

ensure that the plug can be inserted into power socket. Please do not damage safety functions of the

grounded plug. To prevent signal interference caused by voltage fluctuation, it is strongly suggested

that you equip grounded AC power plug for video source equipment.

Australia and Mainland China

U.S.A. and Canada

Continental Europe

U.K.

Grounding

Content

Introduction............................................................................................... 5

Projector Characteristics....................................................................................................................5

Projector Overview............................................................................................................................6

Usage.......................................................................................................... 7

Projector.............................................................................................................................................7

Remote controller ..............................................................................................................................8

Battery Installation...........................................................................................................................10

Remote Controller Operation...........................................................................................................11

Connection

................................................................................................ 12

Connection with Computer..............................................................................................................13

Connection with Display .................................................................................................................14

Connection with Video Source Equipment .....................................................................................15

Connection with HDMI Signal Source Equipment ...................................................................15

Connection with Component Video Signal Source Equipment.......................................................16

Operation

.................................................................................................. 17

Starting the Projector.......................................................................................................................17

Shutting Down the Projector............................................................................................................17

Adjusting Projection Angle .............................................................................................................18

Fine adjustment of image definition................................................................................................18

Adjusting Projection Image Size .....................................................................................................19

Menu Operation...............................................................................................................................20

Maintenance

............................................................................................. 27

Lens Cleaning..................................................................................................................................27

Projector Shell Cleaning..................................................................................................................27

Bulb Replacement............................................................................................................................28

Specifications........................................................................................... 31

Overall dimension............................................................................................................................32

Appendix.................................................................................................. 33

LED indicator message....................................................................................................................33

Compatible Mode ............................................................................................................................34

Troubleshooting...............................................................................................................................35

RS-232 Order and Configuration.....................................................................................................36

IR Control Table..............................................................................................................................39

List of Names and Contents of Toxic and Harmful Substances or Elements in the Product ..........41

Introduction

Projector Characteristics

The projector is integrated with high-performance optical-engine projection technology and user-

friendly design to provide high reliability and usability.

The projector has the following characteristics:

•2D trapezoidal distortion correction function, which facilitates both horizontal and

vertical trapezoidal distortion correction, enables the projection of rectangular

image from any angle

•Corner adjustment function enables the adjustment of four corners of projection image

•SmartEco™ ( smart and economical) saves energy consumption greatly

•Wall color correction function enables projection on the surface with different preset

colors

•Quick automatic search increases signal detection speed

•3D color management enables color adjustment by personal preference

•Optional quick cooling function shortens projector cooling time

•Demonstration timer facilitates control of demonstration time

•One-key automatic adjustment enables the display of optimal image quality

•Compatible with component HDTV (YPbPr)

•Power consumption is below 0.5W in standby mode

Notes

•

Any change of information in the Manual will not be further noticed.

•It is prohibited to copy, transfer or photocopy all or any part of the document without explicit

written consent.

•

Projector Overview

Front overview

1. External control panel

2. Bulb cover

3. Focusing ring

4. Quick support adjusting button

5. Projection lens

6. Front infrared remote-control sensor

7. Safety rod

8. Vent hole (intake hole)

9. Loudspeaker

10. Microphone input jack

11. Audio output jack

12. Audio input jack

13. RGB (PC)/ component video (YPbPr/

YCbCr) signal input port

14. RGB signal output port

15. HDMI input port

16. RS-232 control port

17. USB mini-B interface

18. Kensington anti-theft lock slot

19. Vent hole (exhaust hole)

20. Rear adjustable support

21. Quick-release adjustable support

22. Ceiling mounting hole

23. AC power socket

Front /top

Rear /bottom

13 14 15

Usage

Projector

1. Focusing ring. Adjusting focal length of

projection image.

2. Temperature indicator

The indicator will turn red in case of too high

projector temperature.

3. MENU/EXIT

Opening on-screen display (OSD) menu.

Returning to previous OSD menu, exiting

and saving menu setting.

4. Power/power indicator

Indicating bulb state. In case of bulb

problems

Projector switching between standby mode

and operating mode. The indicator is on or

blinks when the projector is in operation.

5. Eco Blank

Press Eco Blank to close the image for a

while to lower bulb power by 70%.

6. Trapezoidal distortion correction/arrow key

( / up, / down)

Displaying 2D trapezoidal distortion

correction page and adjusting vertical

trapezoidal distortion correction value.

The indicator is turned on or blinks.

7. MODE/ENTER

Selecting available image setting

mode. Activating selected on-screen

display (OSD) menu.

8. SOURCE

Displaying signal source selection

bar.

9. Trapezoidal distortion correction

arrow key ( / left, / right)

Displaying 2D trapezoidal

distortion correction page and

adjusting horizontal trapezoidal

distortion correction value.

In on-screen display (OSD) menu,

#7 and #10 keys serve as direction

arrows to enable the selection of

requiredmenu item and adjustment.

10. Auto

Determining optimal image timing

sequence automatically for the

imagedisplayed.

11. Bulb indicator

Remote controller

1. Power supply

Connecting or disconnecting power supply of the projector.

2. Menu

Opening OSD menu.

3. Four-direction selection key / / /

Select function items or adjust item values with up, down, left and right keys.

4. Select Selecting entry items.

5. Signal source

Displaying input signal menu.

6. PC

Switching PC input signal.

7. HDMI

Switching HDMI input signal.

8. Trapezoidal correction +/-

Manual correction of trapezoidal distortion caused by projection angle.

9. Zoom +/-

Zooming in or out the projection image.

Indice

Manuali Proiettore popolari di altre marche

iEmmet

iEmmet MP-312 Manuale utente

Epson

Epson VS400 Manuale utente

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuale utente

Sony

Sony VPL-HW65ES Manuale di servizio

Toshiba

Toshiba TLP-791U Manuale utente

Philips

Philips LC1341 Guida di riferimento

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuale utente

NEC

NEC NP600S EDU Manuale utente

BenQ

BenQ SH753P Manuale utente

Eiki

Eiki EK-623U series Manuale utente

Epson

Epson PowerLite Pro Cinema 6020UB Manuale utente

Epson

Epson PowerLite Home Cinema 705HD Manuale utente

Christie

Christie LHD700 Manuale utente

Navitar

Navitar FX Manuale utente

InFocus

InFocus LitePro 560 Manuale utente

Sony

Sony SRX-R815P Manuale utente

Vivitar

Vivitar DP1500 X Manuale utente

Acer

Acer C20 Series Manuale utente