Night Owl HDA10 Series Manuale utente
1
What’s in the Box
Package Contents
USB Mouse (x1)Camera(s)
Remote Control
(includes batteries)(x1)
Disclaimer: The exact components of your system, images and
quantities may vary depending on your model number. While
these may vary, this QSG will address the setup and initial
configuration of your DVR and cameras.
DVR
60 ft. Video/Power Cables
(1 cable per camera)
Power Splitter(s)
(1 per 4 cameras)
6 ft. HDMI
(x1)
6 ft. Ethernet
(x1)
Monitor Router
Items Not Included
Mounting
Hardware
Safety
Stickers
DVR Power
Adapter (x1)
Camera Power
Adapter(s)
(1 per 4 cameras)
RESET LAN1 LAN2 LAN3 LAN4 WAN
60 ft. Video/Power/Audio Cables
(If applicable:1 cable per camera)
Your system may include an audio enabled camera.
Each audio enabled camera comes equipped with
an audio enabled BNC Video/Power cable. Simply
connect the white audio end of the BNC cable to
an open audio input port on the rear of the DVR and
ensure the audio input port number and channel port
number match. For instance, if you have an audio
enabled cable plugged into video input port 1, it will
also need to be connected to audio input port 1. After
making the audio input connection, be sure to enable
the audio function in the DVR’s menu.
2
DVR Rear View
CB
AD E G H I
F
Audio Inputs – Audio inputs allow for the connection of audio enabled cameras by
connecting the white RCA plug to one of the audio inputs. After making the
audio input connection, be sure to enable the audio function in the DVR’s menu
interface.
Audio Output – Audio output allows for the connection of an amplified speaker
using an RCA connector.
Video Inputs – Video inputs allow for the connection of BNC cameras.
HDMI Output – HDMI output allows for a video connection. If the TV/Monitor has an
HDMI input, connect the HDMI cable from the HDMI output port on the DVR to the
HDMI input port on your TV/Monitor.
VGA Output – VGA output allows for a video connection. If the TV/Monitor does not
have an HDMI input but does have a VGA input, connect the VGA cable from the
VGA output port on the DVR to the VGA input port on your TV/Monitor. (VGA cable
is not included)
RJ-45 (Ethernet) Port – RJ-45 port will be used to connect the DVR to your router/
modem via the included Ethernet cable.
USB Port – USB port allow for the connection of a USB mouse and/or a USB flash
drive. You will connect the included USB mouse to assist you in navigating the
DVR’s menu interface. You will connect a USB flash drive to download video files
from the DVR and save them to your USB flash drive.
RS-485 (PTZ) Port – RS-485 port allows for the connection of a Pan-Tilt-Zoom
(PTZ) camera. Some PTZ cameras utilize Up the Coax (UTC) technology and will
not require the RS-485 port to function.
Power Input – Power input to connect the included 12V DC power supply.
A
B
C
D
E
F
G
H
I
Images used are for reference only. Your product may vary slightly. An 8 channel model is displayed above.
Product Overview
3
Updating Your System’s Firmware
1Connect one end of the included
Ethernet cable into the LAN port on
the back of the DVR. Connect the
other end into your Modem/Router
to establish an Internet connection.
NOTE: You must have an Internet
connection before powering on
the DVR. The lights in the LAN
port on the back of the DVR will
blink repeatedly when the Internet
connection has been established.
Router Not
Included
ETHERNET
ETHERNET
Before setting up your system, you must update your DVR’s
firmware. Please follow the steps detailed herein. If you do not
update your firmware, you will be unable to use this QSG or the
updated Startup Wizard.
4
2Next, connect the DVR to your
TV/monitor using the provided
HDMI cable. If your TV/monitor
does not have an HDMI port,
you may use a VGA cable
(not provided).
NOTE: To view cameras, TV/
Monitor must be tuned to
the same Input the HDMI is
plugged into.
3Using the provided DVR power
adapter, power on the DVR.
NOTE: Power adapters will be
labeled as either DVR or
Camera.
4Once the DVR has powered on,
a Notice message will appear
indicating a new firmware version
is available. Select OK.
NOTE: Failing to select OK
will result in the firmware not
being updated.
HDMI
Updating Your System’s Firmware
5Next, you will be prompted to
login to the DVR. DO NOT enter
a password. Instead, select Login
and bypass the password request
at this time.
NOTE: Once the firmware has
updated, you will begin the
Startup Wizard and will create
a password at that time.
7This process may take up to
5-8 minutes. It is crucial that
you DO NOT power off the DVR
during this process as that will
cause damage to your unit.
6The firmware will now be
downloaded and you will see
a message on screen showing
the firmware is being remotely
updated.
NOTE: DO NOT power off the
DVR during this process.
5
6
8After the firmware has finished
updating, your DVR will
automatically reboot. Once
the reboot has occurred, you
will be directed to the Startup
Wizard to begin configuring
your system.
Thank you
for updating
your firmware!
7
Connecting Your System
Router Not
Included
HDMI
You may also connect using VGA (not included)
HDMI
ETHERNET
ETHERNET
Plug one end of the included
HDMI cable into the HDMI
port on the back of the DVR.
Plug the other end of the HDMI
cable into the back of your
TV or monitor. NOTE: To view
cameras, TV/Monitor must be
tuned to the same Input the
HDMI is plugged into.
1
Plug in the USB Mouse into
the USB port on the back
of the DVR.
3Plug one end of the included
Ethernet cable into the LAN
port on the back of the DVR.
4
2
Plug the other end of the
Ethernet cable into a port on
the back of your router.
5
STOP: BEFORE installing, test
each camera locally to confirm they
function properly.
Power cable
connectors
Power splitter
connectors
Power
splitter
Camera Power
Adapter
Connect the female power
leads of the BNC cables to the
male power splitter ends.
Surge Protector
(not included)
Plug the DVR power adapter into a
surge protector or Uninterruptible
Power Supply (UPS). NOTE: Some
systems will beep upon booting up.
11
Connect the power splitter to the
camera power adapter and plug
the adapter into a surge protector or
Uninterruptible Power Supply (UPS).
NOTE: Power adapters are labeled TO
CAMERA ONLY and TO DVR ONLY.
9
Connect the DVR power adapter
to the Power Input on the rear of
the DVR.
10
8
Surge
Protector not
included
8
Connect the BNC connector of
the video/power cable labeled
TO DVR ONLY to an open video
input on the DVR.
NOTE: Make sure you twist and
lock BNC connectors.
Make sure you twist and lock BNC connectors
TO CAMERAFROM CAMERA
Connect the ends of the cable
attached to the camera to the
ends of a video/power cable
labeled TO CAMERA ONLY.
6 7
Audio enabled cameras will have a white RCA
connector to transmit audio signal (Optional).
9
Booting Up for the First Time
On the ‘Password Creation’ screen, please note the following:
2
Write your
password here:
Admin Account Creation
By default, the username will be ‘admin’. It must
remain ‘admin’ upon your initial account configuration.
However, you may add additional users at a later time.
Recovery Email Address
Please ensure you provide a valid email address in
case your ever forget your account information.
NOTE: Password can be any alphanumeric combination
between 6 and 20 characters.
Remember Your Password
Night Owl strongly recommends writing down your
password within the Quick Setup Guide. You will need
it every time you log into your DVR and to remotely
view on a Smart Device.
Important… Please Read
Startup Wizard
1When you power on the DVR
you will be prompted with
the following screen. Please
follow the instructions to
complete the Startup Wizard.
9
Indice
Altri manuali Night Owl Registratore digitale
Night Owl
Night Owl Advantage Series Manuale utente
Night Owl
Night Owl DVR-BBHDA10PB-8 Manuale utente
Night Owl
Night Owl L Series Manuale utente
Night Owl
Night Owl WNVR201 Series Manuale utente
Night Owl
Night Owl HDA SERIES Manuale utente
Night Owl
Night Owl F6-DVR8-1TB Manuale utente
Night Owl
Night Owl DP2 Series Manuale utente
Night Owl
Night Owl 8 channel LTE DVR Manuale utente
Night Owl
Night Owl CS-MINI-DVR-4GB Manuale utente
Night Owl
Night Owl DP8 Series Manuale utente
Night Owl
Night Owl Tiger-4500 Manuale utente
Night Owl
Night Owl 8BL Series Manuale utente
Night Owl
Night Owl X Series 16CH Manuale utente
Night Owl
Night Owl WNVRC20 Series Manuale utente
Night Owl
Night Owl 10 Series Manuale utente
Night Owl
Night Owl QSG-FTD-2212 Manuale utente
Night Owl
Night Owl F6-DVR4 Manuale utente
Night Owl
Night Owl WNIP2 Series Manuale utente
Night Owl
Night Owl Zeus-DVR Manuale utente
Night Owl
Night Owl AHD7 SERIES Manuale utente
