Nikon CoolPix P7100 Manuale utente

DIGITAL CAMERA

COOLPI._ P 7100

Reference Manual

Up to three setting combinations that are frequently used for shooting (user

settings) can be saved in U1, U2 and U3. Shooting ispossible in P (Programmed

auto), S (Shutter-priority auto), A (Aperture-priority auto) or M(Manual).

Rotate the mode dial to Ul, U2 or U3 to retrieve the w

settings saved in Save user settings.

•Frame the subject and shoot with these settings, or

chanc]e the settings as required, tL_ __J

• The setting combinations that are retrieved when

the mode dial is rotated to U1,U2 orU3 can be

changed as many times as you want in Save user settings,

• See _58 for more information on the Save user settings.

Changing U 1, U2 or U3 Mode Settings

• See "Features That C_anBe Set Using tile Multi Selector" (_60) for more

information on flash mode (_61), self-timer (_64)/smile timer (_65)/

remote control (_60) and focus mode (_67), AF area mode

• See"Features That (an BeSet Using the Exposure (}ompensation Dial" for more

information on exposure compensation (_71).

• See "Features That (}an Be Set with the quick Menu" for more information on

available quick menu (_73).

• See "Available Specialized Menu for U1, U2 or U3"(_ss) and "Options

Available in the Shooting Menu" (_54) for more information on functions that

can be set using the MENUbutton.

U1,U2 and U3 (User Setting Modes)

Available Specialized Menu for U1,U2 or U3

Following settings can be changed in U1,U2 orU3

mode.

Set to U1,U2 orU3 mode -)' MENUbutton -)' U1,U2 orU3 tab (_13)

Option '_ Description [1Z]

Save user The current settings are stored. _58

settings

Reset user The settings saved to U1,U2 orU3 are reset. _'_Sg

settings

Choose the standard shooting mode (default setting is P). The

current flexible program (when set to P), shutter speed (when

Shooting mode set to S or M) or aperture value (when set to A or M) settings 29

are also saved.

Set the zoom position for when the mode dial isset. Choose

Focal length 28 mm (default setting), 35 mm, 50 ram, 85 mm, 105 ram,

(35mm equiv.) 135 ram, 200 mm or Current zoom position.

Set the information displayed on the monitor when the mode

Photo info did isset. This setting is not applied to the setup menu _'574

settings.

Virtual horizon Set the virtual horizon display for when the mode dial is set. _'574

display This setting is not applied to the setup menu settings.

Initial monitor Set the information displayed on the monitor when the mode 15

display dial isset (default setting is Show info).

Flash mode Set the flash mode for when the mode dial is set. 61

Set the focus mode for when the mode dial is set. The current

Focus focus distance is also saved when the focus mode is MF 67

manual focus).

.58

U1, U2 and U3 (User Setting Modes)

Pressthe multi selector • (_), _ (_1_)),• (_), or i_ ([-I-])while shooting to operate

the following functions.

_) Self-timer (_64)/

Smile timer (_65)/

Remote control

Flash mode (_61)

Focus mode (_67)

[+] AF area mode

Available Functions

Function

Flash mode (_61)

Self-timer (_64)

Smile timer ({_]65)

Remote control 1

Focus mode (_67)

[-I-] AF area mode 2

Available functions differ according to the shooting mode as follows.

•See "List of the Default Settings" (_69) for more information on the default

settings in each shooting mode.

a SCENE EFFECTS U1,U2,U3 _

1 Use the Remote Control ML-L3 (available separately) to release the shutter (_105). It is

convenient for taking self-portraits of group shots and effectively eliminating blur caused

by camera shake that occurs when the shutter-release button is pressed.

2 Set the method of how to change the focus area for autofocus (_54). Set Multi selector

right press to Off in the setup menu (1]_]104) ifyou do not want to display the selected

focus area when the multi sector • is pressed.

3 The setting varies with scene mode or special effects. See "List of the Default Settings"

(_69) for more information.

Features That Can Be Set Using the Multi Selector

Using the Flash (Flash Modes)

You carl shoot pictures with a flash by raising the built in flash. You carl set a flash

mode that suits the shooting conditions.

1 Press the _ @ (flash pop-up) button to raise the flash (_7).

• When the flash is lowered, the flash mode is fixed at (_ (off).

_t Press • (_ flash mode) on the multi selector,

3Press the multi selector to select the desired _

mode and press the I_) button.

• See "Available Flash Modes" ([_62) for more

information.

• When the manual flash isselected, press • before

pressing the _) button and select the flash output .... -

• When _1_ (slow sync) or _F (rear-curtain sync) is

selected for flash mode, the flash mode can be _ _ _ _ ]

switched by pressing • before pressing the _) button. _ [

• Ifthe _) button is not pressed within a few seconds, the [ /

selection isset and the setting menu disappears.

• When _@llTn(auto) is applied, _ is only displayed for a few seconds even if monitor

indicators ([_15) are turned on.

4Frame the subject and take a picture.

• The flash lamp indicates the status of the flash when

the shutter-release button is pressed halfway.

- On: The flash will fire when you press the shutter-

release button all the way.

- Blinking: The flash is charging. The camera cannot

take pictures.

- Off: The flash will not fire when a picture is taken.

• If the battery is low, the monitor will be turned offwhile

the flash is charging.

[] Lowering the Flash

When not using the flash,gently push to lower the flash until it clicksshut (_7).

[] Effective Range of the Built-in Flash

The built in flash hasa range of about 0.3 to 9.0 m (1 ft to 29 ft) for wide angle position, and about

0.3to 4.5 m (1 ft to 14 ft) for telephoto zoom position (when ISO sensitivity isset to Auto).

Features That Can Be Set Using the Multi Selector

Available Flash Modes

_TOAUtO

Flash fires automatically when lighting is dim.

_@ with

Best choice for portraits. Reduces red-eye effect caused by flash in portraits ([_[_)63).

(_) Off

Hash does not fire.

•Available when the scene mode is_ (scene auto selector) or an optional

Speedlight (external flash unit) isattached.

• Use of a tripod is recommended to avoid the effects of camera shake when

shooting in a dark location.

The flash fires when a picture istaken, regardless of how bright the subject is.Use to

"fil[dn" (illuminate) shadows and backlit subjects.

M,_ Manual

Flash isforcibly fired at the flash output that is setfor the builtdn flash.

• Choose the flash output from M_Full (full flash), M_1/2, M_1/4, M_1/8, M_1/16,

M_1/32 and M_1/64. For example, when M_1/16 ischosen, the flash is 1/16 of the

full flash.

• Not available when a Speedlight flash unit (available separately) is attached.

_I_ Slow sync/_ Rear-curtain

• Slow sync:

Fill flash is combined with a slow shutter speed.

Suitable for portraits of human subjects shot at night or under dim light. Flash

illuminates main subject; slow shutter speeds are used to capture background.

• Rear-curtain sync:

Fill flash firesjust before the shutter closes, creating the effect of a stream of light

behind moving subjects.

[] Flash Mode Setting

•The setting varies with shooting mode. See "Available Functions" (_60) and "List of the Default

Settings" (_69) for more information.

• This feature may not be used in combination with certain features, See "Features That Cannot Be

Used Simultaneously" (_80).

• The changed flash mode setting applied in the following situations is saved in the camera's

memory even after the camera is turned off,

When shooting mode P,S,Aor Mis used

When _ (auto with red eye reduction) is selected in I_1 (Auto) mode

Features That Can Be Set Using the Multi Selector

[] Auto with Red-eye Reduction

This camera uses advanced red-eye reduction ("In-Camera Red-Eye Fix").

Pre flashes are fired repeatedly at low intensity before the main flash, reducing the red eye effect,

If the camera detects "red eye" when a picture is taken, Nikon's own In Camera Red Eye Fix processes

the image before it is recorded,

Note the following when taking pictures;

• Because pre flashes are fired, there is a slight lag between when the shutter release button is

pressed and when the picture is shot,

• The time required to save the picture increases slightly,

• Advanced red eye reduction may not produce the desired results in some situations,

• In extremely rare instances, areas not subiect to red eye may be affected by advanced red eye

reduction processing, In these cases, choose another mode and try again,

• The red eye reduction process when N RW (RAW) images (_75) are recorded consists only of the

pre flashing before the main flash (including the JPEG image that is recorded at the same time),

When Red-eye reduction in the setup menu (_ 104) is set to Pre-flash off, the shutter is released

immediately when the shutter release button is pressed all the way.

[] External Flash Unit

You can attach the following Nikon Bpeedlights on the camera's accessory shoe (_2) to take

pictures.

• Bpeedlights SB 400, SB 600, SB 700, SB 800, BB 900

• Wireless Bpeedlight Commander BU 800

Features That Can Be Set Using the Multi Selector

Using the Self-timer

Tile self-timer is suitable for taking group pictures and reducing tile vibration when

tile shutter-release button is pressed.

When using the seJfitimer_ use of a tripod is recommended. Set Vibration reduction

in tile setup menu (_104) to Off when using a tripod to stabilize tile ca mera.

1 Press _ (__Dself-timer) on the multi selector.

_'L*

2Use the multi selector to select _) lOs (or

2s) and press the _) button.

• To change the time for self-timer, press • before

pressing the _) button.

• <_)10s (ten seconds): suitable for group pictures.

• _) 2s (two seconds): suitable for preventing camera

shake.

• When the shooting mode is set to Pet portrait in scene mode, I_i (pet portrait auto

release) isdisplayed (_45). The self-timer _ los and _ 2s are not available.

• The mode selected for the self-timer isdisplayed.

• If the _) button isnot pressed within a few seconds, the selection is set and the setting

menu disappears.

3Frame the picture and press the shutter-release button halfway.

• Set the focus and exposure.

4Press the shutter-release button all the

way. [_

• The self-timer starts, and the number of

seconds remaining before the shutter is

released isdisplayed. The self-timer lamp blirlks

while the timer iscounting down. About one %t_,_ _54

second before the shutter isreleased, the lamp

stops blinking and remains lit.

• When the shutter is released, the self-timer

turns OFF.

•To stop the timer before a picture is taken,

press the shutter-release button again.

[] More Information

See"Self timer: after release"(_104) for more information,

FeaturesThatCanBeSetUsingtheMultiSelector

Smile Timer (Shooting Smiling Faces)

When this mode is selected, the c:amera detects smiling faces and automatic:ally

releases the shutter even if you don't press the shutter-release button.

•This function can be used when the shooting mode is I_1 (auto), P, S, A, M,

Ul, U2, U3, -_] (low noise night), scene mode Portrait or Night portrait.

1 Press _ (__Dself-timer) on the multi selector.

•Change any flash mode, exposure, or shooting menu

settings before pressing the _ button.

2Use the multi selector to choose _ (smile _]

timer), and press the _]_ button.

• Ifthe _) button is not pressed within a few seconds, the

selection isset and the setting menu disappears.

3Frame the picture and wait for the subject to ITll _ _

smile without pressing the shutter-release

button.

• When the camera detects aface, ayellow double border

(focus area) is displayed around that face. When the

camera hasfocused on that face, the double border will

turn green for a moment and focus is locked.

• Up to three faces are detected. When more than one face is detected, the face closest

to the center of the frame is framed by a double border and the others by single

borders.

• If the camera detects that the face framed by the double border issmiling, the shutter

is automatically released.

• Eachtime the shutter is released, automatic shooting using face detection and smile

detection is repeated.

4Shooting ends.

• To cancel smile detection and stop shooting, return to step 1 and select OFF.

Altri manuali per CoolPix P7100

Indice

Altri manuali Nikon Macchina fotografica digitale

Nikon

Nikon COOLPIX S203 Manuale utente

Nikon

Nikon D3100 Manuale utente

Nikon

Nikon Coolpix S4100 Manuale utente

Nikon

Nikon FM3A Istruzioni operative

Nikon

Nikon EN-EL9 - D5000 Digital SLR Camera Guida utente

Nikon

Nikon 26134 - Coolpix S60 Digital Camera Manuale utente

Nikon

Nikon Coolpix Manuale utente

Nikon

Nikon COOLPIX 4200 Manuale utente

Nikon

Nikon D700 Manuale utente

Nikon

Nikon D600 Manuale utente

Nikon

Nikon Coolpix S220 Guida utente

Nikon

Nikon D2Hs Manuale utente

Nikon

Nikon D-40 - D40 6.1MP The Smallest Digital SLR... Manuale utente

Nikon

Nikon 25452 Manuale utente

Nikon

Nikon D1H Manuale utente

Nikon

Nikon COOLPIX 8800 Manuale utente

Nikon

Nikon Coolpix S810c Manuale utente

Nikon

Nikon CoolPix S60 Manuale del proprietario

Nikon

Nikon Z 5 Manuale utente

Nikon

Nikon D200 Manuale utente

Nikon

Nikon Z 7II Manuale utente

Nikon

Nikon Coolpix 5000 Manuale utente

Nikon

Nikon Coolpix L5 Manuale utente

Nikon

Nikon Coolpix S630 Guida utente

Manuali Macchina fotografica digitale popolari di altre marche

Mercury

Mercury 350K Manuale utente

Pentax

Pentax Optio LS 465 Manuale utente

Sanyo

Sanyo VPC-S1085 Manuale utente

GE SMART A1255 Manuale utente

Point Grey

Point Grey Gazelle Manuale utente

Pentax

Pentax P-5 Manuale utente

BlazeVideo

BlazeVideo A280 Manuale utente

Sony

Sony MCA-20 Manuale utente

Sony

Sony Alpha DSLR-A290 Manuale utente

ATIK Cameras

ATIK Cameras One Manuale utente

CohuHD Costar

CohuHD Costar 3930 Series Manuale utente

Leica

Leica M10-R Manuale utente

FujiFilm

FujiFilm FinePix A700 Manuale utente

Lorex

Lorex LNZ81P25 Series Manuale utente

GE J1470S Manuale utente

Sony

Sony A6700 Guida utente

Canon

Canon EOS ELAN7 Manuale utente

Samsung

Samsung SCC-C4253 Manuale utente