Nippon Primex NP-F369 Istruzioni per l'installazione

Specs №D-F10120

Provisional

Product Specifications

3inch Face Mount Printer

ＮＰ－Ｆ３６９

Revision 0.01 2012.11.28 Provisional version

All specifications described are subject to change without prior notice.

Though we made assurance doubly sure to write this product specifications,

Please contact us if you find any mistakes and erroneous omitting.

*This product is under development. Specification might be changed.

Nippon Primex Inc.

Head Office:

1-5-12 Unoki Ohta-ku Tokyo 146-8650 Japan

TEL :+81-3-3750-1234 FAX :+81-3-3750-4555

E-mail : [email protected]

URL : http://www.primex.jp

D-F10120 NP-F369 Product Specifications Rev.0.01(Provisional Ver.)

Revision History

Descriptions

Rev. V. page item change approval PIC

0.01 Provisional New released Provisional version

suzuki

2012.11.30

abe

2012.11.28

[ VCCI Class A ]

この装置は，クラスＡ情報技術装置です。この装置を家庭環境で使用すると

電波妨害を引き起こすことがあります。この場合には使用者が適切な対策を

講ずるよう要求されることがあります。 VCCI-A

Under review

[ FCC Class A ]

This device complies with Part 15 of th CC Rules. Operation is e F

subject to the following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any interference

received, including inter ed operation. ference that may cause undesir

Under review

D-F10120 NP-F369 Product Specifications Rev.0.01(Provisional Ver.)

PRECAUTION

Read Carefully Before Using the Product

Handling the product in a wrong way may decline its performance and also damage the product. Read the notes below before handling the product.

[

Failures

]

1. Static discharge prevention or body grounding must be made for installation and removal of the product to prevent damage of sensor parts etc.

Connect it to the earth ground for ESD measures.

2. Avoid excessive force to the input terminals.

3. Avoid printing with no paper loaded. It can damage thermal head and also shorten its life-time.

4. DO NOT open the front cover while printing and/or cutter operation. It may damage thermal head and cutter.

5. DO NOT pull out the paper with the front cover closed.

6. DO NOT block the paper outlet while print operation. Also, DO NOT grab the paper while print operation.

7. DO NOT scrabble or give impact to thermal head with sharp edge object or any hard materials, which may damage the heat elements.

8. This product is NOT protected against dust or dirt. If used in harsh environment like at dusty place, the thermal head may get damaged or paper feed

may not run properly.

9. When cooling the product with a fan, keep the air exhaust slit away from the printer’s paper exit area so that dust or dirt may not get in the thermal head.

10. This product is equipped with an infra-red reflection sensor. The product must be installed where there is NO direct sun light/infra-red light coming in,

as otherwise, the sensor would not function properly. The sensor function may be affected also by the pre-printed paper if the pre-printed color

appears on the side of paper roll.

11. Use both hands when holding the product in order to prevent from dropping.

12. The product should NOT be installed where it could be exposed to static electricity easily, strong vibration, electromagnetic field, corrosive gas, rain,

fog and direct sunlight.

[

Safety

]

1. Turn OFF the power before connecting or removing connectors. When disconnecting, handle with the connector body and DO NOT pull out by a

cable.

2. The product is NOT protected from water or dew drop. DO NOT put water to the product nor handle it with wet hand because it may damage the

product due to short circuit or heat or fire.

3. In order to prevent excessive current, add an electrolytic capacitor and a fuse (refer to power supply specifications for details) to external 24V power

line.

4. Plug off the printer when the product is not in use for a long time.

5. DO NOT disassemble or modify the product.

6. In case of disposal, follow the regulations or rules of the local authorities.

7. Use power supply in conformity with LPS standard.

8. Do not touch cutter blade regardless of during cutter operating or stopping.

D-F10120 NP-F369 Product Specifications Rev.0.01(Provisional Ver.)

[

Quality

]

1. The product supports only control codes and commands authorized in this document.

2. With such print program that printing and paper feeding movements get interrupted temporarily due to data queuing etc., printing and paper feeding

may jumble on a very first few dots line.

3. The print may jumble at the first 1-2 dot right after the paper cut action.

4. DO NOT touch the heating element part of the thermal head, since it could degrade the print quality due to soil.

5. In case of using print papers other than those specified in this document, print quality and lifetime of thermal head may not reach the level

guaranteed by the manufacturer.

6. DO NOT pull out the paper while the printer is in motion of printing, paper feeding or cutting. When removing the partially cut paper, pull it to either

right or left direction without too much force.

7. Continuous motor running for a long time generates heat and may affect the printer performance. To avoid the case, it is necessary to limit the

continuous motor running time to 6 minutes at maximum with the same interval time for each operation.

8. Motor may produce heat by continuously driving cutter motor for a long time and it may not perform necessary functions. Make sure to follow cutter

tolerable frequency.

9. Set the paper straightened with no slack.

10. A part of this product is made from coated steel plate. It does not affect the product’s quality and performance at all even if the cut face of the steel

plate get rusty after a long time period.

11. There is a possibility that huskiness occurs in a printing side on this printer because of its structure.

D-F10120 NP-F369 Product Specifications Rev.0.01(Provisional Ver.)

[

Others

]

1. This product is designed to use with general electronic devices. (Computer, PC, OA etc.) This product is not designed and guaranteed to use with

devices that require extremely high quality and reliability, also to use with devices that those failures may directly endanger human body and life.

(Atomic power control device, aerospace aircraft device, transportation device, traffic signal device, ignition control device, medical device and

various safety devices: hereafter called as “Specific application”.) Users shall take full responsibility for using with such specific application.

2. DO NOT conduct operation that is not suggested in this instruction. It may cause accident or failure.

3. Data cannot be long-term stored, permanently stored and saved since it is basically evanescent. Nippon Primex Inc. is not responsible for any

damages of data deletion or lost income due to breakdown, repair or inspection.

4. When selecting RTS/CTS in serial flow control, make sure to connect RTS/CTS signal to the flow control signal of the host side, otherwise flow

control will not function and may cause garble character or printing disarray.

5. The coverage of warranty is limited within the product itself, Nippon Primex Inc. is NOT responsible for anything induced by the defect of the product

and DO NOT pay for any compensation that may occur

Table of Contents 1

1. Overview ·············································································································································1

1.1 Application ···································································································································· 1

1.2 Overview······································································································································· 1

1.3 Features ······································································································································· 2

1.4 Configuration ································································································································3

1.5 Options ········································································································································· 4

2. Specifications ······································································································································5

2.1 Basic Specifications ······················································································································ 5

2.2 Paper Specifications ····················································································································· 7

2.3 Print Area······································································································································ 9

2.4 Specifications of Cutter ··············································································································· 10

2.5 Sensor position ····························································································································11

2.6 Power Supply Specifications······································································································· 13

2.7 Reliability Specifications ············································································································· 14

2.8 Environment Specifications (Under checking) ············································································ 15

2.9 Regulations (Under review) ········································································································ 15

2.10 External Dimensions················································································································· 16

3. Configurations ···································································································································17

3.1 Interface【USB(V2.0 FULL SPEED)】······················································································· 17

3.2 Interface【Serial(RS-232C compliance)】················································································· 18

3.3 Connector Signal Table··············································································································· 19

4． Function··········································································································································21

4.1 Function Setting·························································································································· 21

4.2 Error Hanlding····························································································································· 26

4.3 Buffer Full Print··························································································································· 27

4.4 Drive Selection···························································································································· 27

4.5 Select Full size and Half size character ······················································································ 27

4.6 Gray scale printing······················································································································ 28

4.7 Operation Panel·························································································································· 29

4.8 How to set Roll Paper ················································································································· 30

4.9 How to remove remaining paper and jammed paper ·································································· 32

4.10 How to clean Thermal Head etc································································································ 33

4.11 Frame ground ··························································································································· 34

5． Printer Installation ························································································································35

5.1 How to change the position of paper holder.··············································································· 35

Appended reference documents (Please refer to documents as below about command and code table)

・Command reference [NP-F369] (D-F10120)

*Following Code tables are on Command reference in addition to command.

Domestic code table, Overseas code, Code Page 858, International code, Code Page 1253、

Code Page 1250、Code Page 1251、Code Page 1252、Code Page 1254

・Kanji code [JIS C 6226･1983] (D-F10068)

・Chinese code [GB18030-2000] (D-F10069)

・Korea code [KS X1001-1992] (D-F10070)

D-F10120 NP-F369 Product Specifications Rev.0.01(Provisional Ver.)

D-F10120 NP-F369 Product Spec Rev.0.01(Provisional Ver.) 1

1. Overview

1.1 Application

This book applies to NP-F369.

The specification in this book is for NP-F369.

(Notice: Usable paper, characters, power supply, environment, etc. may be different to other

models.)

(Please refer to appendix about the specification of option products.)

(Notice: Usable paper, environment, etc. may be different to printers.)

1.2 Overview

This printer is categorized as follows:

ＮＰ－Ｆ

３

６９

Ｄ－＊＊

①②③ ④

①Type (Fixed)

F：Face mount type

②Mechanism (fixed)

3:3 inch model

【Notice】

・3 inch model represents NP-F369*(The following sentence is the same）

③Interface (default setting)

Standard

D：Serial(RS232C) and USB(V2.0 FULL SPEED) are user selection.

④OEM etc. (default setting).

No mark: original model

D-F10120 NP-F369 Product Spec Rev.0.01(Provisional Ver.) 2

1.3 Features

This model incorporates newly developed in-house printer mechanism and is a module

printer improving its usability moreover.

Installation with each apparatus is just finished with power supply (DC24V) and data supply

only, and this model can be used under the wide range of temperature environment.

Therefore, the user can install this model freely.

1) Printing speed MAX.250mm/sec

2) Wide range of operation environment.

3) Capable for a thick paper.

4) High Quality Printing.

5) Interface available for Serial (RS232C) and USB (v2.0 Full Speed)

6) Adaptation to various types of 1D barcode.

Capable for 2D code(QRcode model 2, PDF417).

7) Adaptation to various applications.

8) Equipped with a paper roll holder with a user-friendly near-end paper sensor.

9) Driver(Windows XP(32bit) / Windows Vista(32,64bit) / Windows 7(32,64bit) /

Windows CE5.0 / Windows CE6.0 Linux(Sample))

10) Easy to re-write firmware *note3 with Flash Memory & registration of 3 patterns of NV bit image

is possible.

11) Multiple Languages are available.

12）Capable of controlling an optional paper feeding device (Presenter).

13）Easy maintenance thanks to a complete openable thermal head.

Easy to remove a jammed paper.

14）A LED bezel is separately available to enable the edge of paper outlet to light.

15）Various options available. *Note2

16）16 gray scale printing is capable.*Note４

*Note1: Refer to “2.2 Paper Specifications” for more detailed information.

*Note2: Refer to “1.5 Option”.

*Note3: [F/W] present [Firmware] hereinafter.

*Note４:16 gray scale printing is usable with EX driver (beyond to Version*.*.*.*).

1.4 Configuration

1) NP-F369D (Standard)

Configured parts of the product are as below.

Configured parts

No Name Specifications Q’ty

NP-F369D

3inch, USB, Serial

1 NP-F369D 2 pin power connecter 1 ○

*No accessories. No sample paper rolls.

Default status is under review.

NP-F369D [Default status]

D-F10120 NP-F369 Product Spec Rev.0.01(Provisional Ver.) 3

Indice

Altri manuali Nippon Primex Stampante

Nippon Primex

Nippon Primex NP-2411 Manuale utente

Nippon Primex

Nippon Primex NP-K2092 Manuale utente

Nippon Primex

Nippon Primex NP-2411 Istruzioni per l'installazione

Nippon Primex

Nippon Primex NP-K3053 Istruzioni per l'installazione

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente