Nitsuko TX Series Manuale utente

Nitsuko TX Series User Guide

Table Contents

Trunk Outgoing Call 1

Specified Trunk Access 1

Last Number Dialling (LND) 2

Saved Last Number Dialling (SLND) 3

Abbreviated Dialling 3

One Touch Dialling 4

Toll Restriction 5

Walking Toll Restriction 6

Dial Block 7

Flash 8

Pulse to Tone Conversion 8

Camp On (Trunk Queuing) 9

Key Touch Tone 9

Easy Trunk Access 10

Queuing Group Access 10

Automatic Repeat Dialling 11

Loop Key Trunk Access 12

Automatic Off Hook Trunk Access 12

Account Code 13

Trunk Incoming Call 14

Incoming Trunk Access 14

Trunk Off Hook Signalling 14

Ringing/Recall Trunk Off Hook Access 15

Night Service (Manual/Auto) 15

Call Forward 16

Follow Me 18

Call Pickup 19

Do Not Disturb 19

Executive DND 19

DISA (Extension Access) 20

Hold/Transfer/ uring Conversation 21

Hold 21

Music on Hold 22

External Music On Hold 23

Transfer 23

Park Hold (824/1232/2464) 26

Conference 26

Long Conversation Warning 29

Long Conversation Cut Off 29

Break In 29

Other Trunk Features 31

PBX Compatibility 31

Dial Mode (Tone/Pulse) Selection 31

Private Line 32

Tenant Service 32

Unsupervised Conference 33

Call Timer 33

DISA (Trunk to Trunk) 34

Intercom Outgoing Call 35

Intercom Link Increase 35

Intercom Call 35

Direct Station Select 36

Intercom Off Hook Signalling 37

Group Hunt 37

Step Calling 38

Camp On (Call back) 39

Message Waiting 39

Paging 41

Flexible Station Numbering 43

Dual Handsfree Hotline 44

Intercom Incoming Call 45

Intercom Answer 45

Call Pickup 45

Meet Me Answer Paging 46

Meet Me Conference Paging 46

Do Not Disturb 46

Intercom Hold 47

Intercom Call Transfer 48

Call Froward 48

Follow Me 48

Executive DND 49

Other Intercom Features 50

BGM (824/1232/2464) 50

External Paging 50

Doorphone 50

Door Lock Control 51

Room Monitor 52

DSS Console (1232/2464) 53

Alphanumeric isplay TEL Feature 57

Text Message 57

Time and Date 62

Name Storing (Trunk & Station) 63

Directory Dialling 64

Alarm Clock 65

Stopwatch 66

Busy Lamp Field 66

Other Features 67

Handsfree (Speaker & Microphone) 67

Lamp Shift Mode (824/1232/2464) 68

Remind Call on SLT 69

Station Message Detail Recording (SMDR) 69

Polarity Reverse Detection (1232/2464) 70

DISA with Audio Guidance 71

External Call Forward on DISA 71

One Touch Feature Access 72

Volume Control 73

DLS Console (824/1232/2464) 74

Headset Operation 75

Trunk Outgoing Call

 Specified Trunk Access

escription:

Trunk (CO/PBX) lines can be group into a maximum of 30 groups. The line groups

assigned to each extension can be used for outgoing calls. Up to two outgoing line groups can

be assigned to an extension. An extension user can place outside calls on a particular line group

by pressing Line key or dialling line number.

Station Application:

KTS, SLT

Operation:

To make an outside call on a particular line:

<KTS>

When the trunk line appears under a Line key:

1. Lift handset or press SPK key.

2. Press a Line key. Hear dial tone.

3. Dial telephone number.

When the trunk line does not appear under a Line key:

1. Lift handset or press SPK key. (See note 1)

2. Dial 9 (824/1232/2464).

Dial 90 (308).

3. Dial two digit line number. Hear dial tone.

4. Dial telephone number.

<SLT>

1. Lift handset. Listen for dial tone.

2. Dial 0 or 9 (See note 2).

3. Dial two digit line number. Hear dial tone.

4. Dial telephone number.

Note: 1 If program #75 D is 0 (No Tone), press ICM key after step 1 to seize Intercom

(824/1232/2464).

Note: 2

Program #20 D Data Automatic Trunk Access Code for SLT Dial at Step 2

0 0 9

1 9 0

Note: 3 Easy Trunk Access, Queuing Group Access, Loop Key Trunk Access, Automatic Off

Hook Trunk Access features provide other ways to access a Trunk Line.

Related System ata:

#02: Line Group Assignment

#03 C: Common Use Line Assignment

#06: Outgoing Line Access

#75 D: KTS Off Hook Mode Selection





 Single Step Access

escription:

Single Step Access allows a key telephone user to obtain outside or intercom dial tone

for an outgoing call in a single step, without lifting the handset or pressing the SPK key.

Station Application:

KTS

Operation:

To obtain dial tone using Single Step Access:

− Do not lift handset.

1. Press a Line key. The Line key and SPK key light.

− Dial tone comes over the speaker.

To obtain intercom dial tone using Single Step Access:

− Do not lift handset.

1. Press ICM key. ICM and SPK key light.

− Dial tone comes over the speaker.

Related System ata:

#15 E: Single Step Access.





 Preselection

escription:

This feature permits access to a Trunk or ICM call by lifting the handset or pressing the

SPK key within three seconds of pressing a Line or ICM key.

Station Application:

KTS

Operation:

1. Press a Line or ICM key.

2. Lift handset or press SPK key within 3 seconds.

− Trunk Line or Intercom is seized.

Related System ata:

#15 E: Single Step Access.

 Last Number ialling (LN )

escription:

The last telephone number dialled on an outgoing call (Trunk line) can be redialled. A

maximum of 18 digits are stored.

Station Application:

KTS, SLT

Operation:

<KTS>

1. Lift handset or press SPK key.

2. Press a Line key.

3. Press LND ley.

<SLT>

1. Lift handset.

2. Dial function code (See note 1).

3. Dial queuing group number (See note 2).

Note 1:

Program #20 D Data Automatic Trunk Access Code for SLT Dial at Step 2

Dial Plan 1 60

Dial Plan 2 0 0 94

1 9 04

Note 2: Queuing group numbers are 0 to 6 (0: Any Line, 1 6: Queuing group No).

Related System ata:

#08 B: SLT Dial Plan Set

#33: LND/Repeat Dial Hooking Time

#64 C: Trunk Line Seizing Order Selection

 Saved Last Number ialling (SLN )

escription:

This feature permits saving the last number dialled for redialling at a later time. The

saved telephone number remains in memory until another is stored in its place.

Station Application:

KTS

Operation:

To place an outside call using saved last number:

1. Lift handset or press SPK key.

2. Press a Line key.

3. Press DC key and #

Press One Touch key.

To store dialled number as saved last number:

1. While talking on trunk line.

2. Press DC key twice before terminating a call

Press One Touch key before terminating a call.

To set One Touch key as SLN key:

1. Press SPK key.

2. Press ICM key. (824/1232/2464 Only) (See note 1)

3. Press DC key and (

4. Press One Touch key.

5. Press OPAC key and #

6. Press SPK key.

Note 1: If program #75 D is 0 (No Tone), skip step 2. (824/1232/2464).

Note 2: One Touch key #10 is set as SLND key initially.

Related System ata:

Not applicable.

 Abbreviated ialling

escription:

The system provides common use abbreviated dialling. Abbreviated Dialling allows

storage of up to 100 or 200 locations 18 digit telephone number under 2 or 3 digit codes (00 to

99 or 000 to 199).

The user can select the storage quantity of Abbreviated Dial in Program #17 D.

Station Application:

KTS, SLT

Operation:

To place an outside call:

<KTS>

1. Lift handset or press SPK key.

2. Press an idle Line key.

3. Press DC key.

4. Dial abbreviated number (00 to 99) or (000 to 999).

<SLT>

1. Lift handset.

2. Dial function code (See note 1).

3. Dial queuing group number (0 to 6) (See note 2).

4. Dial abbreviated number (00 to 99) or (000 to 199).

Note 1:

Program #20 D Data Automatic Trunk Access Code for

SLT

Dial at Step 2

Dial Plan 1 5

Dial Plan 2 0 0 93

1 9 03

Note 2: Queuing group numbers are 0 6 (0: Any line, 1 6 Queuing group No).

To store abbreviated number (Extension 10 Only):

1. Press SPK key.

2. Press ICM key (824/1232/2464 only) (See note 1)

3. Press DC key and .

4. Dial abbreviated number (00 to 99) or (000 to 199)

5. Dial phone number to be stored (See note 2).

6. Repeat steps 3 to 5.

7. Press SPK key to exit form Abbreviated Dialling entry.

Note 1: If program #75 D is 0 (No Tone), skip step 2 (824/1232/2464).

Note 2: You can enter pauses (TRFR key), flashes (FLASH key) and stops (CONF key) when

storing a Abbreviated Dial Number. Each pause, stop or flash counts as a digit when totalling the

number of digits in a Abbreviated Dial Number. When stop is inserted, dialling will be stopped this

position and can be continued by dialling.

Related System ata:

#08 B: SLT Dial Plan Set

#17 D: Storage Quantity of Abbreviated Dial

#18 C: Abbreviated Dialling Restriction

 One-Touch ialling

escription:

One Touch Dialling allows you to store ten of your most frequently called outside

numbers as personal abbreviated dial numbers at your extension so you can call them with just

a single touch. Dial number to be stored is up to 18 digits including pauses (TRFR key), flashes

(FLASH key) and stops (CONF key). The One Touch Dial numbers are stored under the ten

One Touch keys (No.1 to No.10) as F01 to F10.

When the number of common Abbreviated Dialling is set to 100 in Program #17 D, the

memory for the remaining 100 numbers can be used for personal abbreviated dial numbers at

10 key telephones. The assigned Key Telephone user can store up to 10 more numbers under

ten One Touch keys as F11 to F20. When dialling, the user must press OPAC key before

pressing an One Touch key.

Station Application:

KTS

Operation:

To place an outside call:

1. Seize a Trunk line.

2. Press On e Touch key which stores desired phone number.

To store a One Touch ial number:

1. Press SPK key.

2. Press ICM key (824/1232/2464 only) (See note 1).

3. Press DC key and 

4. Press a One Touch key to store a phone number.

5. Dial phone number to stored (One Touch Key No.1 to No.10 store numbers in F01

F10).

6. Repeat steps 3 to 5.

7. Press SPK key to exit from One Touch Dialling entry.

To place an outside call:

1. Seize a Trunk line.

2. Press OPAC key.

3. Press One Touch key which stores the desired phone number.

To store a One-Touch ial number:

1. Press SPK key.

2. Press ICM key (824/1232/2464 only) (See note 1).

3. Press OPAC key.

4. Press DC key and 

5. Press a One Touch key to store a phone number. (One Touch Key No.1 to No.10 store

numbers in F11 F20).

6. Dial phone number to be stored.

7. Go to Step 3 to enter another number.

Hang up or press SPK to finish.

To check stored One-Touch ial number:

(On hook condition)

1. Press CHECH key.

2. Press SPK key.

3. Press DC key and OPAC key.

4. Press a One Touch key which stores the phone number.

5. Press CLEAR key to finish.

Note 1: If program #75 D is 0 (No Tone), skip step 2 (824/1232/2464).

Note 2: If the above operations are taken without pressing OPAC key, the numbers stores in F1

F10 are called.

Related System ata:

#17 D: Storage Quantity of Abbreviated Dialling.

#75 B: Personal Abbreviated Dial.

Toll Restriction

escription:

Toll Restriction determines extension’s ability to make calls. Each extension can be

assigned on of the following six classes per mode (Day/Night). Toll Restriction Class A is the

highest and the Class F is the lowest.

Class-A: No dialling restrictions.

Class-B: Dials are restricted by DATA B except dials matching PBX extension call or

DATA F.

Class-C: Dials are restricted by DATA D2 except dials matching PBX extension call,

DATA C, or DATA F.

Class- : Dials are restricted by DATA D2 or DATA D1 except dials matching PBX

extension call or DATA F.

Class-E: Dials are restricted all outgoing Trunk calls except dials matching PBX extension

call or DATA F.

Class-F: Intercom calls only.

The DATA (restricted/permitted codes and number length limit) within the Classes must be

entered in programming.

If there are PBX lies, PBX access code must be assigned in programming in order for Toll

Restriction to be properly applied.

Toll restrictions are not applied to lines programmed as Unrestricted Lines.

When the system is placed in night mode by Night Service feature, the Toll Restriction class

assignment for night mode is activated.

Station Application:

KTS, SLT

Operation:

When an extension user dials a call that is not allowed by the assigned Class, the system

automatically disconnects the line.

Related System ata:

#03 D: Unrestricted Lines

#18 C: Abbreviated Dialling Restricted

#35 A: Toll Restriction Class (Day)

#35 B: Toll Restriction Class (Night)

#36: Permitted Codes (Data C)

#37: Number Length Limit (DATA D1)

#38: PBX CO Access Codes (DATA E)

#39: Common Unrestricted Codes (DATA F)

#40: Class B Restricted Codes (DATA B)

#41: Class C/D Restricted Codes (DATA D2)

 Walking Toll Restriction

escription:

Walking Toll Restriction lets you temporarily override an extension’s dialling

programmed security code at that extension. Dialling the code overrides the restrictions set up

in Toll Restriction.

Station Application:

KTS, SLT

Operation:

<KTS>

1. Lift handset.

2. Press an idle Line key.

3. Press OPAC key.

4. Press DC key.

5. Dial security code.

6. Dial phone number.

<SLT>

1. Lift handset.

2. Dial 07 (or 97). => (See note)

3. Dial security code.

4. Dial 9 (or 0). => (See note)

5. Dial telephone number.

Note:

Program #20 D Data Automatic Trunk Access Code for SLT Dial at Step 2 Dial at Step 4

0 0 97 0

1 9 07 9

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Nitsuko Sistema telefonico

Nitsuko

Nitsuko 1232 - Manuale

Manuali Sistema telefonico popolari di altre marche

Teleco

Teleco Perfect Voice Tis 16 Manuale utente

AT&T

AT&T Network Adapter 25 Manuale utente

AVE

AVE AF902R-CE Manuale utente

Tynetec

Tynetec Advent xt Manuale utente

Ericsson

Ericsson DCT1800-S Manuale utente

NEC

NEC Electra Elite 192 Manuale utente

Alcatel

Alcatel EASY REFLEXES 4200 Manuale utente

Panasonic

Panasonic KX-TDA50 Manuale utente

Bticino

Bticino PABX 28D Manuale utente

NEC

NEC SL 2100 Manuale utente

Sonifex

Sonifex Phone In 6 Manuale di istruzioni

TransTel Communications

TransTel Communications TD-824i Istruzioni per il montaggio

Nortel

Nortel BCM50 Manuale del prodotto

Panasonic

Panasonic KX-TS25B Manuale utente

ASCOM

ASCOM TD 92375GB Manuale del proprietario

Karel

Karel MS26S Scheda informativa del prodotto

EnGenius

EnGenius DuraFon PRO Manuale utente

Teledat

Teledat X130 DSL Manuale utente