Njoy Echo Pro Series Manuale utente

Sensor Box (Temperature & Humidity)

User manual

UPAC-TEMPHUM-CG01B

Before using this product, carefully read all product documentaon and retain it for future reference.

111.0

2 3

Thank you for purchasing our products!

Please read this manual before using the product.

Focusing on quality at compeve prices, nJoy designs

consumer products for a beer and enjoyable way into

the digital world.

This UPS will protect your electronic equipment from physical

damage and will provide emergency baery backup power to

prevent data loss in the event of power problems.

Table of contents

1. Package contents ...................................................................................................... 3

2. Product overview...................................................................................................... 4

2.1 Product Features ............................................................................................ 4

3. Technical Specicaons .......................................................................................... 5

4. Installaon Guide ...................................................................................................... 6

4.1 Method 1: Hook and Loop Tape Mounng ................................................ 6

4.2 Method 2: Fixed Mounng .......................................................................... 7

5. Conformance Approvals ......................................................................................... 8

5.1 FCC Warning ................................................................................................... 8

6. Troubleshoong ........................................................................................................ 9

7. Appendix ................................................................................................................. 10

7.1 Input Dry Contact Applicaon .................................................................. 10

Package contents1

EMS-U01

Hook and Loop Tape

User’s Manual x 1

Flat Head Screw (M3x20)

with Plasc Nylon Anchor

Technical Specicaons

CAT5 RJ45 Ethernet Cable

(10 feet/3.05 m)

NOTE!

If any of the above package content is missing or is damaged please contact the

shop where you have bought the product from.

nJoy UPS models that are compable with this product:

Echo Pro Series

Aster Series

Argus Series

1K / 2K / 3K

1.2K / 2.2K / 3K

4 5

Product overview2

The environmental monitoring sensor (EMS-U01) along with selected Power

Management Cards (PMCARD) enables users to monitor the temperature

and humidity of a server closet and/or data center remotely. Addionally, the

EMS-U01 provides 4 input dry contacts that enable users to monitor the sta-

tus of connected devices, such as door switch sensors.

Features include:

• Real me environment monitoring

• Remote management and conguraon of the sensor via Web Browsers

or NMS

• Automac events nocaon via email, SMS and SNMP traps

• 4 input dry contacts applicaon interface provided

• Displays the name and locaon of the sensor and connected devices

2.1. Product Features

A. LED

B. Input Dry Contact 1-4

C. Common Connecon

D. RJ45 Port (connect to PMCARD)

NOTE!

Please refer to Appendix for

Input Dry Contact Application.

DATA

STATUS

COM

4123

Technical Speciﬁcations3

EMS-U01

Input Voltage 7V - 28V

Power Dissipaon

Halt mode 72 mW/

Normal mode 110 mW

(Default 12V input)

Measurement Range and Accuracy

Temperature 32-158°F with accuracy ± 1.8°F/

0-70°C with accuracy ± 1°C

Humidity 10-90 RH with accuracy ± 2%

Communicaon

Connecon Port RJ45 Port

Input Dry Contact 4

Physical

Dimensions (L x W x H) 2.32 x 1.77 x 1.14 inches/

59 x 45 x 29 mm

Weight 1.46 oz /41.5 g

Safety Approvals FCC Class B, CE

6 7

Installation Guide4

4.1. Method 1: Hook and Loop

Tape Mounng

Step 1. Clean the surface of the area where

the sensor will be installed. Apply

one side of the hook and loop tape

to the boom of the sensor and the

other side to the sensor locaon.

Step 2. Aach the sensor on the surface and

hold for about 5 seconds to ensure

cohesion.

NOTE!

Once the sensor is installed, you will want to

leave it in place to ensure the hook and loop

tape.

Step 3. To connect the sensor with PM-

CARD, use the aached RJ45 Eth-

ernet Cable. Plug one end into the

RJ45 Port and the other end into the

PMCARD.

NOTE!

If the distance of PMCARD and the sensor is

longer than 10 feet/3.05 m, use a standard RJ45

Ethernet Cable as needed (max 50 feet/15 m).

Universal RX/TXLink

PMCARD

4.2. Method 2: Fixed Mounng

Step 1. Drill a hole that is compable with the anchor and insert the includ-

ed anchor.

Step 2. Insert and ghten the screw into the anchor. Leave enough of the

screw exposed for the sensor to be mounted to.

Step 3. Hang the sensor horizontally or vercally.

HoleØ6mm (0.24in)

8 9

Step 4. To connect the sensor with PMCARD, use the aached RJ45 Ether-

net Cable. Plug one end into the RJ45 Port and the other end into

the PMCARD.

For further conguraon informaon, please refer to the PMCARD user’s manual.

Conformance Approvals5

5.1. FCC Warning

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protecon against harmful interference

in a residenal installaon. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

the instrucons, may cause harmful interference to radio communicaons.

However, there is no guarantee that interference will not occur in a parcular

Universal RX/TXLink

PMCARD

installaon. If this equipment does not cause harmful interference to radio

or television recepon, which can be determined by turning the equipment

o and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separaon between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device compiles with Part 15 of the FCC Rules. Operaon is subject to

the following two condions: (1) this device may not cause harmful inter-

ference, and (2) this device must accept any interference received, including

interference that may cause undesired operaon.

NOTE!

The manufacturer is not responsible for any radio or tv interference caused by

unauthorized to this equipment. Such modifications could void the user’s authority

to operate the equipment.

Troubleshooting6

Problem Soluon

The PMCARD is not

able to acquire en-

vironment sensor’s

informaon.

Check the LED.

When the connecon is ok, the LED should always

be on; otherwise, ensure the RJ45 Ethernet cable is

correctly connected to the PMCARD and sensor.

NOTE!

Do not use a crossover cable which is for Tx/Rx.

The Input Dry

Contact does not

funcon correctly.

Ensure the Input Dry Contact wires are correctly

connected and make sure the open/short circuit

seng of the connected devices is the same as the

seng on the Web Interface.

Appendix7

7.1. Input Dry Contact Applicaon

Do not input signals that carry voltage into the input dry contacts. The input

dry contacts only allow for open/short circuit.

This product can expose you to chemicals including Styrene, which

is known to the State of California to cause cancer, and Bisphenol-A,

which is known to the State of California to cause birth defects or

other reproductive harm.

For more information go to www.P65Warnings.ca.gov.

WARNINGS

Dry Contact

External Sensor 1/2/3/4

COM

1234 Disposal of Old Electrical & Electronic Equipment

(Applicable in the European Union and other European countries with

separate collecon systems)

This symbol on the product or on its packaging indicates that this product shall

not be treated as household waste.

Instead it shall be handed over to the applicable collecon point for the recycling

of electrical and electronic equipment.

By ensuring this product is disposed of correctly, you will help prevent potenal

negave consequences for the environment and human health, which could

otherwise be caused by inappropriate waste handling of this product.

The recycling of materials will help to conserve natural resources.

Altri manuali per Echo Pro Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Njoy UPS

Njoy

Njoy UPCSBLS665TRPCG01B Manuale utente

Njoy

Njoy Eris 600 Manuale utente

Njoy

Njoy Ranger Series Manuale utente

Njoy

Njoy Horus Plus Series Manuale utente

Njoy

Njoy Balder Series Manuale utente

Njoy

Njoy Token Series Manuale utente

Njoy

Njoy Cadu 650 Manuale utente

Njoy

Njoy Balder 1500 Manuale utente

Njoy

Njoy Aster Series Manuale utente

Njoy

Njoy PWAV-10001AK-AZ01B Manuale utente

Njoy

Njoy Echo Pro Series Manuale utente

Njoy

Njoy Garun 30KL Manuale utente

Njoy

Njoy PWUP-OL300AT-AZ01B Manuale utente

Njoy

Njoy Septu Series Manuale utente

Njoy

Njoy Balder Series Manuale utente

Njoy

Njoy Ranger Series Manuale utente

Njoy

Njoy Ranger 60KR Manuale utente

Njoy

Njoy Argus Series Manuale utente

Njoy

Njoy UPCMCOP130HBAAZ01B Manuale utente

Njoy

Njoy Septu Series Manuale utente

Njoy

Njoy Aten PRO Series Manuale utente

Njoy

Njoy Protector 801 Manuale utente

Njoy

Njoy Akin Series Manuale utente

Njoy

Njoy Aster Series Manuale utente

Manuali UPS popolari di altre marche

Pylontech

Pylontech Victron & Pylontech US5000 Manuale utente

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuale utente

Mecer

Mecer ME-1000-WTU Manuale utente

Mustek

Mustek PowerMust 530(B) Plus Manuale di installazione e funzionamento

Emerson

Emerson Liebert NXL series Manuale utente

MAKELSAN

MAKELSAN BOXER SERIES Manuale utente

Block

Block PC-0524-400-0 Manuale utente

CyberPower

CyberPower CP585LCD Manuale utente

Eaton

Eaton 3S Istruzioni per il montaggio

CyberPower

CyberPower Office Tower Series UPS 1000 Manuale utente

CyberPower

CyberPower BM100 Manuale utente

Best Power

Best Power 610 Manuale utente

Best Power

Best Power Unity/I UT3K Manuale utente

Mustek

Mustek PowerMust 400 Offline Manuale utente

Xantrex

Xantrex Trace 512 UR-UPS Manuale utente

Forza

Forza SL-1501UL Manuale utente

LEGRAND

LEGRAND keor 310081 Manuale utente

ABB

ABB Conceptpower DPA 500 Manuale utente