6
1. Click on the Enter into the function menu,
According to the Exit Exit menu can be;
2. Press the Front can see upwards,
Press the Back can see down.
3. Commonly used in general is the inside of the
equipment maintenance nozzle test,
The automatic cleaning, manual on ink, ink and so on!
1. Click on the Clean may go into the shower
nozzle to choose,Press Enter directly to clean.
1. Press the Power switch on, and hold the Front + Rigtt + Exit immediately enter the maintenance menu;
2. Press the Rigtt transferred to Out 1: oFF (main board signal output), according to the Back to 8: oFF; Click on the
Euter detection is determined(UV lights show the card output without problems) to 9: OFF as a little UV lamp test operation,
complete direct test Shut down the power button and then open the can.
Special operations: the UV lamp test
Control panel
