NoiseKen ADAPTOR Manuale utente

INSTRUCTION MANUAL

MAGNETIC FIELD LOOP ADAPTOR

MODEL 03-00070A

NOISE LABORATORY CO., LTD.

Edition 1.02

AEC00277-00E-0C

NOTICE

The contents of this booklet are subject to change without prior notice.

No part of this booklet may be reproduced or transferred, in any form, for any purpose, without the

permission of Noise Laboratory Co., Ltd.

The contents of this booklet have been thoroughly checked. However, if a doubtful

point, an error in writing or a missing is found, please contact us.

Noise Laboratory Co., Ltd. shall have no liability for any trouble resulting from the misuse or

improper handling of this product regardless of the contents of this booklet or arising from the

repair or remodeling of this product by a third party other than Noise Laboratory Co., Ltd. or its

authorized person.

Noise Laboratory Co., Ltd. shall have no liability for any trouble resulting from the remodeling or

modification of this product.

In no event shall Noise Laboratory Co., Ltd. be liable for any results arising from the use of this

product.

1. ImportantSafetyPrecautions

Important points for the safe use of this unit are provided below. Be sure to

carefully read this information before use.

1. Do not use this unit in areas where open flames are prohibited or areas having

an explosive atmosphere. Electrical discharges can occur during use, which

can cause these atmospheres to ignite.

2. Do not allow people with pacemakers or other electronic medical devices to

operate this unit and to enter the testing area while this unit is operating.

3. The section "Basic Safety Precautions" contains important safety

recommendations, and so be sure to read the section carefully before making

the testing environment settings, connections, and starting testing.

Memorandum

2. ApplicationFormForInstructionManual

We place an order for an instruction manual.

Model: 03-00070A

Serial No.:

Applicant:

Company name:

Address:

Department:

Person in charge:

Tel No.:

Fax No.:

Cut

line

Cut off this page "application form for instruction manual" from this volume and keep it for future use

with care.

When an INSTRUCTION MANUAL is required, fill in the above Application Form and

mail or fax it to your nearest sales agent of Noise Laboratory or Noise Laboratory.

Your sales agent:

Memorandum

3. Tableofcontents

IMPORTANT SAFETY PRECAUTIONS ................................................................................................... 1

APPLICATION FORM FOR INSTRUCTION MANUAL............................................................................ 3

TABLE OF CONTENTS............................................................................................................................. 5

PREFACE.................................................................................................................................................. 6

BASIC SAFETY PRECAUTIONS ............................................................................................................. 7

5－1.

ARNING SYMBOLS AND THEIR MEANING

....................................................................................... 7

5－2.

UNDAMENTAL

AFETY

RECAUTIONS

........................................................................................... 7

PACKAGE COMPONENTS....................................................................................................................... 9

SPECIFICATIONS ................................................................................................................................... 10

CONNECTION TO EQUIPMENT ............................................................................................................ 10

OPERATION.............................................................................................................................................11

10.

MECHANISM OF MAGNETIC FIELD GENERATION/REFERENCE DATA .......................................... 12

10－1.

10-1.

ECHANISM OF MAGNETIC FIELD GENERATION

................................................................... 12

10－2.

10-2.

EFERENCE DATA

................................................................................................................. 12

11.

11.11.

11.

WARRANTY ............................................................................................................................................ 14

12.

MAINTENANCE....................................................................................................................................... 16

13.

NOISE LABORATORY SUPPORT NETWORK...................................................................................... 17

4. Preface

Thank you for purchasing the MAGNETIC FIELD LOOP ADAPTOR FOR GT-30R

(DISCHARGE GUN) (03-00070A).

In order to obtain the maximum performance of the product, thoroughly read this book

before use. Also, read the instruction manuals for the electrostatic discharge simulator

and the discharge gun to ensure safety and reliability. This product cannot be used with

the TC-815 series (our previous discharge gun model).

*Follow the safety precautions and warranty conditions described in the Instruction

Manual for the MAGNETIC FIELD LOOP ADAPTOR.

This manual is intended to handle and utilize 03-00070A safety for the person who can

obey the operation method and precautions.



Keep this Instruction Manual in a readily accessible place.

Features

The MAGNETIC FIELD LOOP ADAPTOR is a one-turn loop coil for magnetic field

generation that is used with the discharge gun for the electrostatic discharge

simulator.

Thanks to its special structure, the product can produce a magnetic field containing

many high-frequency components.

* This product is incompatible with IEC standards.

5. BasicSafetyPrecautions

5－1. Warning symbols and their meaning

5－2. Fundamental Safety Precautions

1.1.

1. This unit cannot be used in an explosive area, fire prohibited area, etc. Use of this

unit in such an area is liable to cause combustion or ignition. 【

【【

【Precautions for

human body and environments 】

】】

】

2.2.

A person who has a pacemaker on should not operate this unit and also should

not enter the area where it is operating. Non-compliance may lead to

malfunctioning of the medical device due to interference.

Precautions for human

body and operation】

】】

】

3.3.

3. Our company and sales agents shall have no responsibility for any accident resulting

in injury or death, any breakage or resultant damages due to irresponsible handling.

【

【【

【Precautions for human body, operation, environments and connection】

】】

】

4.4.

4. Never fail to atch equipment hile this unit is operating. When leaving this unit,

stop running test by turning off po er beforehand. Other ise, a third person or

equipment related to the test may be exposed to a danger. 【

【【

【Precautions for human body,

operation and environments】

】】

】

5.5.

5. Do not use a damaged connector or cable. Other ise, you may receive an electric shock

or the internal unit of this simulator and equipment connected to it may be damaged.

【

【【

【Precautions for human body and connection】

】】

】

6.6.

6. Do not apply this unit for other use than the intended use of ESD test.【

【【

【Precautions for human

body, operation and environments】

】】

】

7.7.

7. Be sure to ground PE terminal of AC inlet of this unit【

【【

【Precautions for human body and

connection】

】】

】

WARNING 警告

CAUTION 注意

Means a

Caution

If such a danger is not avoided, a potential

danger which may result in a minor or

medium degree of injury will be caused.

Means a

warning

If such a danger is not avoided, a potential

danger which may result in a death or serious

injury will be caused.

5.Basic Safety Precautions

8.8.

8. Place this unit in a steady place to avoid an accident such as fall. 【

【【

【Precautions for

human body and environments】

】】

】

9.9.

9. Avoid giving a strong shock to this unit. Do not put a heavy item on this unit. Do not

block the ventilation. Prevent foreign matter from getting into the unit through the

vents. 【

【【

【Precautions for environments】

】】

】

10.

10.10.

10. If de ing or condensation occurs, thoroughly dry it before operating the unit.

【

【【

【Precautions for environments】

】】

】

11.

11.11.

11. Avoid using this unit in an extremely humid or dusty place.

【

【【

【Precautions for

environments】

】】

】

12.

12.12.

12. Repair, maintenance and internal adjustment of this unit should be performed by a

qualified service engineer.

13.

13.13.

13. Do not ipe this unit ith thinner, alcohol or similar solvent. When the body is dirty,

soak a cloth in detergent, squeeze the cloth and ipe the body ith it.

CAUTION 注意

Indice

Altri manuali NoiseKen Ricevitore

NoiseKen

NoiseKen CA-805B Manuale utente

Manuali Ricevitore popolari di altre marche

Garmin

Garmin GA 23 Manuale utente

Aiphone

Aiphone PS-12F Manuale utente

IMES

IMES TCS-01CA-PMI Manuale utente

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuale

AMIMON

AMIMON AMN12310 WHDI Manuale utente

Dual

Dual DMCPA79BT Istruzioni operative

Sound Associates

Sound Associates SA652P Manuale utente

Sherwood

Sherwood NewCastle R-772 Manuale utente

Audio

Audio A10-RX Series Manuale utente

AllSee

AllSee PushShare PSRV1.1 Manuale utente

DEMAG

DEMAG DRC-DR D2 Manuale utente

Teleco

Teleco TVRCL868A02 Manuale utente

Bosch

Bosch RF3222E Manuale utente

Kramer

Kramer 631R Manuale utente

Xpress

Xpress xmc10 Manuale utente

JVC

JVC KD-MR1BTS Manuale utente

Omega Engineering

Omega Engineering UWTC-REC3 Manuale utente

e-survey

e-survey E300 Pro Manuale utente