Norac UC4 Total Control Manuale utente

Total Control

Automatic Boom Height

System

Gregson Maverick 120 Series

Installation Manual

Canada

NORAC Systems International Inc.

CALL TOLL FREE: 1-800-667-3921

(306) 664-6711

SHIPPING ADDRESS:

3702 Kinnear Place

Saskatoon, SK

S7P 0A6

United States

NORAC, Inc.

CALL TOLL FREE: 1-866-306-6722

(763) 786-3080

SHIPPING ADDRESS:

1290 Osborne Rd. NE, Suite F

Fridley, MN

55432-2892

For other service locations please view our website:

www.norac.ca

Improving the Competitiveness of Industry and Agriculture through Precision

Measurement

Printed in Canada

Reorder P/N: UC4-BC-GM1-INST Rev B (Gregson Maverick 120 Series)

NOTICE

NORAC Systems International Inc. reserves the right to improve products and their specifications without notice

and without the requirement to update products sold previously. Every effort has been made to ensure the accuracy

of the information contained in this manual. The technical information in this manual was reviewed at the time of

approval for publication.

TABLE OF CONTENTS

1 INTRODUCTION .................................................................................................................................. 2

2 GENERAL SYSTEM DESCRIPTION .................................................................................................. 3

3 PARTS LIST......................................................................................................................................... 4

4 INSTALLATION PROCEDURE ........................................................................................................... 8

4.1 EXISTING HYDRAULIC SYSTEM FUNCTION CHECK ................................................................................ 8

4.2 BOOM SPEED TEST ............................................................................................................................ 9

4.3 WING SENSOR INSTALLATION ........................................................................................................... 11

4.4 MAIN ROLL SENSOR AND TARGET INSTALLATION .............................................................................. 15

4.4.1 The Mounting Brackets ......................................................................................................... 15

4.4.2 Mounting on the Boom ......................................................................................................... 16

4.5 HYDRAULIC INSTALLATION................................................................................................................ 21

4.5.1 Valve Assembly and Mounting .............................................................................................. 21

4.5.2 Hydraulic Plumbing ............................................................................................................... 24

4.6 ELECTRICAL INSTALLATION .............................................................................................................. 26

4.7 COMPLETING THE INSTALLATION....................................................................................................... 30

5 ELECTRICAL REFERENCE – CABLE DRAWINGS ........................................................................ 31

5.1 ITEM C1: 44662B-40 –SENSOR TRUNK CABLE ................................................................................ 31

5.2 ITEM C2: 44668 –SENSOR BRANCH CABLE ..................................................................................... 31

5.3 ITEM C3: 44656 –VALVE CABLE...................................................................................................... 32

5.4 ITEM C4: 44651 –VALVE EXTENSION CABLE .................................................................................... 32

5.5 ITEM C10: 44650-11 –POWER CABLE GREGSON MAVERICK ............................................................ 33

1 INTRODUCTION

Congratulations on your purchase of the NORAC UC4 automated sprayer boom

height control system. This system is manufactured with top quality components

and is engineered using the latest technology to provide operating features and

reliability unmatched for years to come.

When properly used the system can provide protection from sprayer boom damage,

improve sprayer efficiency, and ensure chemicals are applied correctly.

Please take the time to read this manual completely before attempting to install the

system. A thorough understanding of this manual will ensure that you receive the

maximum benefit from the system.

YOUR INPUT CAN HELP MAKE US BETTER! If you find issues or have

suggestions regarding the parts list or the installation procedure, please

don’t hesitate to contact us via the information given below:

Phone: 1-800-667-3921 in Canada (Toll Free)

1-866-306-6722 in the United States (Toll Free)

0-800-404-8389 United Kingdom (Toll Free)

1-306-664-6711 all other regions

E-mail: [email protected]

Website: www.norac.ca

2 GENERAL SYSTEM DESCRIPTION

Figure 1 depicts the general system layout of the UC4 Sprayer Boom Control

system.

Figure 1 – System Components and General Location

NOTICE:

Every effort has been made to ensure the accuracy of the information contained in

this manual. All parts supplied are selected to fit the sprayer and supply the

customer with a complete installation. However NORAC cannot guarantee all parts

fit as intended due to the variations of the sprayer by the manufacturer. Please

read this manual in its entirety before attempting installation.

ATTENTION:

When installing the UC4 system please be aware that at a point in the installation

your sprayer booms will be inoperative until the installation is complete. Any

installation procedure requiring boom movement will need to be done

first. Once the hydraulics have been disconnected you must complete the electrical

installation before the booms become operative.

3 PARTS LIST

The parts that come with your UC4 Sprayer Boom System are listed in. In this

document, the item number shown on the left side of this table references each part.

Please ensure that all parts in your kit are present before proceeding with

your installation.

Table 1 – Gregson Maverick Sprayer Boom Control System Parts

Item Part Number Description Pcs Len

UC4-BC-GM1 KIT UC4 BOOM CONTROL GREGSON MAVERICK 1 EA

* BRACKET PARTS *

B10 44704 MOUNTING BRACKET UC4-BC VALVE 1 EA

B11 44740 MOUNTING BRACKET ROLL SENSOR UC4 1 EA

B12 44741 MOUNTING BRACKET ROLL SENSOR TARGET UC4 1 EA

B13* 44728 MOUNTING BRACKET COMPLETE UC4 BREAKAWAY

EXTENDED

2 EA

* CABLE PARTS *

C1 44662B-40 CABLE UC4 SENSOR TRUNK AMPF TO AMPF BLACK

STANDARD 40FEET

1 EA

C2 44668 CABLE UC4 SENSOR 1 AMP RECEPT 3 AMP PLUG

1 EA

C3 44656 CABLE VALVE VARIABLE RATE 1 EA

C4 44651 CABLE VALVE EXTENSION 1 EA

C10 44650-11 CABLE POWER UC4 BOOM CONTROL GREGSON

MAVERICK

1 EA

* ELECTRONIC PARTS *

E1 4461BC UC4 BOOM CONTROL PANEL 1 EA

E2 44631 UC4 ULTRASOUND SENSOR 3 EA

* HYDRAULIC PARTS *

V1 44933

44933S

VALVE PACKAGE CC LS PROP 2 STATION

EXPANDABLE W/FILTER

VALVE BLOCK ASSEM UC4-BC 2-STATION CC/LS

VARIABLE RATE

1 EA

H1 104369 COUPLING HYD 6MBP 2 EA

H2 104470 COUPLING HYD 10MB 6MJ 2 EA

Item Part Number Description Pcs Len

H3 100655 HYD HOSE 2 WIRE 3/8 IN 1 60 IN

102897 HYD HOSE END 6WC 6FJX 1 EA

104459 HYD HOSE END 6WC 6FJX90 1 EA

H4 100656 HYD HOSE 1/4 IN 5000 PSI 1 112 IN

104702 HYD HOSE END 4WC 4FJX90 1 EA

103189 HYD HOSE END 4WC 6FJX 1 EA

H5 104702 HYD HOSE END 4WC 4FJX90 1 EA

103189 HYD HOSE END 4WC 6FJX 1 EA

100656 HYD HOSE 1/4 IN 5000 PSI 1 70 IN

H6 100655 HYD HOSE 2 WIRE 3/8 IN 1 60 IN

102897 HYD HOSE END 6WC 6FJX 1 EA

104459 HYD HOSE END 6WC 6FJX90 1 EA

H7 100656 HYD HOSE 1/4 IN 5000 PSI 1 112 IN

104702 HYD HOSE END 4WC 4FJX90 1 EA

103189 HYD HOSE END 4WC 6FJX 1 EA

H8 100656 HYD HOSE 1/4 IN 5000 PSI 1 70 IN

104702 HYD HOSE END 4WC 4FJX90 1 EA

103189 HYD HOSE END 4WC 6FJX 1 EA

H50 44928 ORIFICE INSERT .047 IN ONE WAY 4 EA

H51 103312 COUPLING HYD 6MB 6MJ 6 EA

* MISC. PARTS *

M1 446BC-MAN MANUAL UC4 BOOM CONTROL OPERATORS 1 EA

M2 100084 TIE CABLE 21 IN BLACK 10 EA

M3 100091 TIE CABLE 7.5 IN BLACK 150 EA

M4 104409 FOAM DISC 45 PPI CONDUCTIV 1/2 X 2-3/4 DIA 6 EA

M5 105435 CHAIN 1/2 IN PLASTIC 3 42 IN

M6 100660 BOLT HEX NC GR5 PLTD 1/4X1 3 EA

M7 100853 NUT HEX NC GR5 PLTD 1/4 IN 3 EA

M10 UC4-BC-GM-INST MANUAL INSTALLATION UC4 GREGSON MAVERICK 1 EA

M11 100616 BOLT HEX NC GR5 PLTD 3/8X3-1/2 2 EA

M12 100947 WASHER LOCK SPRING PLTD 3/8 IN 2 EA

M14 105436 TUBING PLASTIC CLEAR PETG 2.75 X.028 1 16 IN

* In a kit shipped prior to February 1, 2007, the part number for Item B13 is 44722.

The parts that come with your UC4 System are listed in the above table and shown

in their general installation configuration.

Figure 2 – UC4-BC Components

Figure 3 – Hydraulic Components

4 INSTALLATION PROCEDURE

Before installing the NORAC UC4 Boom Control System to your sprayer, it is

necessary to check that all functions of the existing hydraulic system are working

properly.

Furthermore, it is informative to determine how quickly your sprayer booms and

main (center) section are able to change their position without the UC4 System

installed. Doing so may illustrate the design strengths and constraints of your

sprayer’s mechanical and hydraulic configuration.

This information may also prove valuable when troubleshooting the installation,

and if you need to contact NORAC for installation support. For example, NORAC

support staff may use this information to determine if there are unwanted orifices

(or backwards orifices) remaining in the hydraulic system when the UC4 System is

installed.

Drive your sprayer onto a flat piece of land, without any obstructions in the way of

boom movement (e.g. power lines). Try to gain the best view of the booms and

involved cylinders as you can. This may be best done with two people: one in

the cab, and one outside. Perform following Function Check and Boom Speed

Test.

4.1 E

XISTING

YDRAULIC

YSTEM

UNCTION

HECK

Check that all functions of the existing hydraulic system of your sprayer by using

Table 2. There may be more functions in the existing hydraulic system. Please refer

to the sprayer’s operation manual and ensure checking all functions.

Table 2 – Hydraulic System Function Check Sheet

HYDRAULIC SYSTEM FUNCTION

INNER OUTER TIP* FIELD

OPERATION

FOLD UNFOLD FOLD UNFOLD FOLD UNFOLD UP DOWN

LEFT BOOM

RIGHT BOOM

MAIN BOOM N/A N/A N/A N/A N/A N/A

ROLL* N/A N/A N/A N/A N/A N/A

*Some sprayers may not have this function/section.

Altri manuali per UC4 Total Control

Indice

Manuali Sistema di sollevamento popolari di altre marche

morse

morse 82H-124 Manuale utente

Braun

Braun NL955 Series Manuale utente

haacon

haacon 1889.10 Manuale utente

Protekt

Protekt AT 252 Manuale utente

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manuale utente

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manuale utente

Genie

Genie Z-60/34 Manuale utente

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manuale utente

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manuale utente

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manuale di programmazione

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manuale di programmazione

BERG

BERG BeNomic EasyLeaf Manuale utente

Powermate

Powermate LiftGate LG-3 Manuale utente

Snorkel

Snorkel TM12 Series Manuale utente

Terberg

Terberg OMNIDEKA Manuale utente

Harmar Mobility

Harmar Mobility AL625 Istruzioni operative

Rotary

Rotary SPO16 Manuale utente