NorAM 65 E T4 FINAL Manuale utente

-1

T4 FINAL

Motor Grader

Operator’s Manual

June, 2018

Part # 34491

S/N: Tier 4 Final 65ET10101 – UP

This page intentionally left blank.

NORAM 65ET GRADER

Table of Contents 1

NORAM 65ET GRADER

TABLE OF CONTENTS

SAFETY

Safety Messages ....................................1-1

Safety Symbol Explanation .................. 1-2

Safety Decal Locations ......................... 1-6

GENERAL INFORMATION

Intended Use ......................................... 2-1

Introduction to this Manual ................. 2-1

Orientation ............................................ 2-2

Machine Description .............................2-2

Identification Numbers ........................ 2-3

Component Identification and

Locations .......................................... 2-5

Electronic Display ............................... 2-28

OPERATION

Mounting and Dismounting ................. 3-1

Daily Pre-Starting Inspection .............. 3-1

Rollover Protective Structure (ROPS) .3-3

Driving the Machine .............................3-8

Moldboard and Implement Operation 3-11

LUBRICATION AND MAINTENANCE -

GRADER COMPONENTS

Safety Messages .................................... 4-1

General Information ............................. 4-4

Accessing Lubrication and

Check Points .................................... 4-7

Maintenance Intervals ....................... 4-11

Every 10 Hours or Daily ..................... 4-13

Every 50 Hours or Weekly ................. 4-18

Every 100 Hours ................................. 4-22

Every 250 Hours or Monthly .............. 4-24

Every 500 Hours or 3 Months ............ 4-27

Every 500 Hours or 6 Months ............ 4-31

Every 1000 Hours or 6 Months .......... 4-34

Every 2000 Hours or 1 Year ............... 4-37

When Required ................................... 4-41

LUBRICATION AND MAINTENANCE -

CUMMINS TIER 4 FINAL

General Information ............................. 5-1

Maintenance Intervals ......................... 5-3

Every 10 Hours or Daily ....................... 5-4

Every 250 Hours or Every 3 Months ... 5-7

Every 500 Hours or Every 6 Months ... 5-8

Every 1000 Hours or 1 Year ............... 5-11

Every 2000 Hours or 2 Years ............. 5-12

When Required ................................... 5-13

NORAM 65ET GRADER

2 Table of Contents NORAM 65ET GRADER

LUBRICATION AND MAINTENANCE -

CAT TIER 4 FINAL

General Information .............................6-1

Maintenance Intervals ..........................6-3

Every 10 Hours or Daily .......................6-4

Every 50 Hours or Weekly ....................6-7

Every 250 Hours ...................................6-9

Every 500 Hours ...................................6-9

Every 500 Hours or 1 Year .................6-10

Every 1000 Hours ...............................6-18

Every 1500 Hours ...............................6-18

Every 2000 Hours ...............................6-19

When Required ....................................6-20

SPECIFICATIONS

Options .................................................7-15

TROUBLESHOOTING

Engine ....................................................8-1

Transmission .........................................8-1

Hydraulics and Implements .................8-2

NORAM 65ET GRADER

1-1

Safety 1

Safety Messages

SECTION 1: SAFETY

SAFETY MESSAGES

General safety messages appear in this Safety Messages section. Specific safety messages are located

in appropriate sections of the manual where a potential hazard may occur if the instructions or

procedures are not followed.

Personal Safety

A signal word “DANGER”, “WARNING”, or “CAUTION” is used with the safety alert symbol.

Safety signs with signal word “DANGER”, “WARNING”, or “CAUTION” are located near specific

hazards.

DANGER Indicates a hazardous situation that, if not avoided, will result in death or serious

injury.

WARNING Indicates a hazardous situation that, if not avoided, could result in death or serious

injury.

CAUTION Indicates a hazardous situation that, if not avoided, could result in minor or

moderate injury.

Machine Safety

NOTICE: The word “NOTICE” is used to inform the reader of something that needs to be known to

prevent machine damage and/or property damage if a certain procedure is not followed.

NORAM 65ET GRADER

1-2

Safety

Safety Symbol Explanation

SAFETY SYMBOL EXPLANATION

This is the safety alert symbol. This symbol is used in combination with an exclamation

mark or other symbols to alert you to the potential for bodily injury or death.

Read Operator’s Manual and safety signs before operating machine.

Check machine before operating. Machine must be in good operating condition

and all safety equipment installed and functioning properly.

Wear personal protective equipment as required by the job. Dress properly.

Wear close fitting clothing and confine long hair. Avoid wearing jewelry such as

rings, wrist watches, necklaces or bracelets. Consult your employer, site

supervisor or OSHA for specific requirements for:

• a hard hat

• safety glasses

• work shoes or boots

• reflective clothing

• hearing protection

• gloves, as needed

Keep spectators away.

NORAM 65ET GRADER

1-3

Safety 1

Safety Symbol Explanation

Refer to and follow the Shutdown Procedure before servicing, cleaning,

repairing, or transporting machine.

Pressurized fluid can penetrate body tissue and result in serious injury or death.

Leaks can be invisible. Keep away from any suspected leak. Relieve pressure in

the hydraulic system before searching for leaks, disconnecting hoses, or

performing any other work on the system. If you must pressurize the system to

find a suspected leak, use an object such as a piece of wood or cardboard rather

than your hands. When loosening a fitting where some residual pressure may

exist, slowly loosen the fitting until oil begins to leak. Wait for leaking to stop

before disconnecting the fitting. Fluid injected under the skin must be removed

immediately by a surgeon familiar with this type of injury.

Contact with moving parts can cause death or serious injury.

• Keep hands, feet, and clothing away from power-driven parts.

• Wear close-fitting clothing and confine long hair. Avoid wearing jewelry,

such as rings, wristwatches, necklaces, or bracelets.

• Keep all shields and guards in place and properly secured.

Explosion and separation of a tire can cause serious injury or death.

• Never stand beside the tire when inflating.

• Never inflate beyond the tire manufacturer’s recommended tire pres-

sure.

• Always mount, demount or inflate tires with properly trained and quali-

fied personal.

Diesel Exhaust Fluid (DEF) may cause eye irritation and can be moderately

irritating to the skin. Exposure to decomposition products may cause a health

hazard. Serious effects may be delayed following exposure.

DEF is not expected to produce significant adverse health effects when the

recommended instructions for use are followed.

• DO NOT breathe DEF vapor or mist.

• DO NOT eat, drink, or smoke when using DEF.

• Avoid DEF contact with eyes, skin, and clothing.

• Wash thoroughly after handling DEF.



NORAM 65ET GRADER

1-4

Safety

Safety Symbol Explanation

General Safety Messages

• Only responsible persons, delegated to do so, should operate any machine.

• Be sure safety shields, guards, and barriers are in place and in good condition before starting

the machine.

• Check to see that all personnel are clear of the machine before starting.

• Place all controls in NEUTRAL or OFF position when shutting the machine down. Apply the

park brake. Be sure all controls are in NEUTRAL or OFF position and the park brake is applied

before starting the engine.

• When parking the machine for the night, provide the appropriate lighting and marking if the

machine is adjacent to a roadway or a construction area where work is in progress.

• DO NOT leave the machine unattended when the engine is running.

• Keep the machine clean. The process of cleaning will reveal loose bolts, hydraulic lines, fittings

and other trouble spots.

• Always keep the operator’s platform clean and free from grease, oil, rags, and loose tools to help

prevent slipping and falling.

• Before cleaning, adjusting or servicing the machine, shut engine down and place all controls and

switches in neutral or off position. Completely lower all attachments, or securely support raised

components. A variation of the above procedure may be used if instructed within this manual.

• Refuel the machine only with the engine OFF. Never smoke or have an open flame in area when

refueling.

• Refill or check the radiator only when the engine is OFF and the radiator is not hot. Turn cap

slowly to the first stop to relieve the pressure before removing the cap.

• Before starting or continuing operation, correct or report any mechanical deficiency that may

cause further damage.

• Securely support with suitable blocking the mainframe, moldboard or other components that

are suspended or held aloft by slings, hoists, jacks or hydraulic cylinders before working under

or between them.

• Make no modifications to your equipment unless specifically requested by NorAm.

• No riders allowed on machine. Only a seated operator, with seat belt securely fastened, is per-

mitted on the machine during grading operation or when roading between job sites. Operator’s

platform is for properly trained and qualified personnel only.

The following general safety rules are important for safe operation of the

machine.

NORAM 65ET GRADER

1-5

Safety 1

Safety Symbol Explanation

Slope Operation Safety

Drive the machine at a speed suitable for the terrain. Avoid sudden stopping, starting or turning.

Avoid traveling across slopes. Drive up and down slopes when possible. Safe operating slope depends

upon many factors, including:

• Keep moldboard low and close to the ground. Lower moldboard to ground if machine starts to

slip.

• Select the same gear when going downhill as would be used going uphill. Select the gear before

starting down slope. DO NOT freewheel down slopes or hills.

• Uphill or downhill position of moldboard

• Uneven, rough or slippery ground conditions

• Potential for ground giving way, causing either unplanned forward, reverse, or sideways tilt

• Nearness of ditches, ruts, stumps, or other obstructions and sudden changes in slope

• Travel speed and turning rate

• Front axle only steering versus frame articulation and front axle steering

• Braking performance

• Skill of operator

Safety Decals - Inspect

Safety decals located on your machine contain important and useful information that will help you

operate your equipment safely. To assure that all decals remain in place and in good condition, follow

the instructions given below:

• Keep decals clean. Use soap and water, not mineral spirits, abrasive cleaners, or other similar

cleaners that will damage the decal.

• Replace any damaged or missing decals. When attaching decals, the temperature of the mount-

ing surface must be at least 40°F (5°C). The mounting surface must also be clean and dry.

• When replacing a machine component with a decal attached, replace the decal also.

• Replacement decals can be purchased from your NorAm dealer.

Check Laws And Regulations

Know and obey all federal, state, and local laws and regulations that apply to your work situation.

Fire Extinguisher

Fire extinguisher (not supplied with machine) should be mounted on the machine for easy access to

the operator.

Failure to follow any of the preceding safety instructions or those that follow

within this manual, could result in serious injury or death. This machine is to be

used only for those purposes for which it was intended as explained in this

operator’s manual.

NORAM 65ET GRADER

1-6

Safety

Safety Decal Locations

SAFETY DECAL LOCATIONS

Indice

Altri manuali NorAM Attrezzature per l'edilizia

NorAM

NorAM 65ET T4 FINAL Manuale utente

Manuali Attrezzature per l'edilizia popolari di altre marche

SASFORKS

SASFORKS EXTREME Manuale utente

Hailo

Hailo H-50 Manuale utente

Graco

Graco LineLazer ES 1000 Manuale per l'uso e la cura

Greenlee

Greenlee 555RSC Manuale utente

Manitowoc

Manitowoc Grove CD3340B Manuale utente

Lux Tools

Lux Tools A-FMR-20 Set Manuale utente

SIP

SIP 03683 Manuale utente

Volvo

Volvo L30G Manuale utente

Grizzly

Grizzly G8712 Manuale utente

Modulift

Modulift CMOD 12 Manuale utente

Case

Case DV201 Manuale utente

Sealey

Sealey SC10.V2 Manuale utente

Wacker Neuson

Wacker Neuson DT05 Manuale utente

HYVA

HYVA AMCO VEBA 81 Series Manuale utente

Atlas Copco

Atlas Copco Dynapac V5100TV Manuale utente

Toro

Toro 323 Manuale utente

Manitowoc

Manitowoc National Crane 1400A Manuale utente

SGS

SGS EC1500 Manuale utente