Nortel Manager Manuale di istruzioni
1166-025-511 Rev. C
Annex Manager R3.0 Release Notes
AnnexManagerisanSNMP-basedmanagementapplicationthatuses
the X Windows/Motif graphical user interface. Annex Manager is
specifically designed to manage Bay Networks Remote Access Servers,
and is not intended as a general purpose network manager. While Annex
Manager can detect SNMP devices that are not Annexes, you can not use
it to configure a non-Annex device. Annex Manager R3.0 runs on a
workstationplatformrunningBSDUnix(SUNSparc,HP,RS/6000).The
user interface is built to the X Windows/Motif standard. Annex Manager
is designed to run stand-alone and contains all the necessary SNMP
protocolroutines and X Windows/Motif binarylibraries. The installation
process copies the appropriate binary executable and all associated help
and data files from the distribution media onto the workstation's disk
store. Annex Manager can be loosely coupled with several standard
network management products such as SunNet Manager, HP/Openview,
orNetviewforIBMAIX.AnnexManagerdoesnotuse theAPIinterfaces
provided by those products.
Why Use Annex Manager?
Annex Manager allows a system administrator to monitor and configure
Annexes in a network. Annex Manager is a host based, window oriented,
configuration and management application. The displays and user
interface conform to the X Windows/Motif standard. Annex Manager
works best with a color monitor directly attached to a workstation or a
color X Windows terminal connected to a networked UNIX host. In
addition, it supports a grey-scale X Windows terminal attached to a
workstation.
Annex Manager's configuration tool is easy to learn and use. It supports
thefunctionalityoftheolderhost-basedNAconfigurationtoolinaneasier
to use format. Annex Manager is specifically designed to configure and
manage Annex products. Its features depend on the proprietary MIB
defined forthe Annex andon the variousstandard MIBs supported by the
Annex. Therefore, Annex Manager cannot manage other SNMP
166-025-511 Rev. C
Annex Manager R3.0 Release Notes
2
networked nodes. It is not intended to be a generic SNMP management
tool.
Annex Manager provides features that have not been available with the
NA utility. Users can:
• Configure Annexes in Setup or Customize mode.
• Setup mode allows users to configure one or more Annexes
by setting the most commonly used parameters.
• Customize mode lets users set individual Annex parameters
and provides access to all main menu commands.
• Save current configuration parameter settings in Script files and
restore the parameters from those files.
• Edit script files with a common editor on the workstation.
• Compare the configuration parameters of two ports on the same
Annex or on different Annexes.
• Copy the current configuration parameter settings from one port
to another or one Annex to another.
• Retrieve basic status and statistics information from the Annex.
• Define parameter groups to simplify configuration operations.
• Define site specific defaults.
• Discover Annexes in the network.
• Save Annex address lists after discovery and add names to the
lists manually.
• Display default values for each configuration parameter on
demand.
• Display on-line documentation for all Annex configuration
parameters, all Annex Manager windows and all widgets on the
screens.
• Boot and reset an Annex.
• Broadcast messages to users on Annex ports.
• Automatically reset ports or Annex subsystems after changing
configuration parameters.
3
Annex Manager R3.0 Release Notes
166-025-511 Rev. C
• Use the editor specified in the user's environment to locate and
edit an Annex configuration file.
Supported Annex Hardware
Annex Manager R3.0 supports the following Remote Annex hardware
running the specified Annex Software Release:
Table 1. Supported Annex Hardware
Hardware Software
RA2000 R13.3
RA4000 R13.3
RA6100 R13.3
5390 R13.3
5391 R13.3
5393 R13.3
5399 R14.0
RA6300 R13.3
Annex 3 R10.0
Micro Annex R10.0
MicroCS R10.0
Cabletron CSMIMII R13.3
Cabletron CSMIMT1 R13.3
Cabletron MODMIM R13.3
3COM 6133C-XS R13.3
3COM 6117C-XS R13.3
166-025-511 Rev. C
Annex Manager R3.0 Release Notes
4
System Requirements
Annex Manager Release 3.0 runs on several popular UNIX systems.The
following sections list the hardware and software requirements for
installing and running Annex Manager.
For all systems, aminimum of 10MB offree diskspace must be available
prior to installation. A minimum of 32 MB of RAM is recommended,
although specific memory requirements will vary, depending on the type
of workstation and the other tasks that may be concurrent with Annex
Manager. In all cases, a color monitor or X Windows terminal is
recommended, although Annex Manager is usable with a monochrome
X Windows terminal.
Sun Requirements
Annex Manager runs under Sun OS releases 4.1.3c and 4.1.4 and Solaris
releases 2.4 and 2.5.1 on SPARC systems. The following patches are
required for SunOS versions earlier than 4.1.3c:
• Patch number 100444-48 OpenWindows 3.0: OpenWindows
V3.0 Server Patch 3000-86.
• Patch number 100492-01_09 OpenWindows 3.0: jumbo patch
for olwm 3.0.
HP Requirements
Annex Manager runs under HP-UX 9.0.5 and 10.10 on HP 9000 Series
700 Workstations.
IBM Requirements
Annex Manager runs on an IBM RS/6000 workstations under AIX 4.1.4.
5
Annex Manager R3.0 Release Notes
166-025-511 Rev. C
Remote Display Requirements
If you use Annex Manager on an X Windows terminal, we recommend
that you have more than 2MB of RAM to avoid problems when you have
multiple windows open simultaneously.
New Features and Commands
Annex Manager Release 3.0 now supports the newly released 5399. For
more information on the new 5399 product features and commands,
please see the Remote Annex Release 5.0.12 Release Notes and updated
Annex Manager User’s Guide included with your documentation.
Known Problems/Limitations
• The following erroneous error condition and message should be
ignored:
If a PRI device (6300, 5393, 5399) is selected and the switch
type is changed the following message is displayed:
<annex_name (node port 0)> anxt1CasDnisDigits :
Parameter cannot be set: it does not exist or is
read-only.
There was an error setting one or more parameters.
This may be due to a timeout.
Altri manuali per Manager
1
Indice
Altri manuali Nortel Software
Nortel
Nortel TAPI Manuale utente
Nortel
Nortel VoIP Gateway Manuale utente
Nortel
Nortel Viewer Manuale utente
Nortel
Nortel Alteon OS 40M2420 Manuale operativo
Nortel
Nortel Express Call Center Manuale utente
Nortel
Nortel Voice Mail Guida all'installazione
Nortel
Nortel VoIP Gateway Manuale utente
Nortel
Nortel 5100 Series Release 2.3.3 Manuale utente
Nortel
Nortel Telephony Manager Manuale utente
Nortel
Nortel Contact Center Manager Manuale di istruzioni
Nortel
Nortel Express Call Center Manuale utente
Nortel
Nortel Passport 8600 Series Manuale utente
Nortel
Nortel VPN Client Manuale utente
Nortel
Nortel Alteon OS 42C4911 Guida utente
Nortel
Nortel Voice Mail Guida rapida
Nortel
Nortel CTI ToolKit Manuale utente
Nortel
Nortel V2.3 Manuale di istruzioni
Nortel
Nortel NN43119-100 Manuale utente
Nortel
Nortel Attendant PC Guida di sicurezza
Nortel
Nortel ICB Guida rapida
Manuali Software popolari di altre marche
PS Audio
PS Audio PowerPlay Manuale del proprietario
Brady
Brady LOCKOUT PRO 3.0 Manuale di servizio
Avaya
Avaya Interaction Center Manuale utente
Texas Instruments
Texas Instruments TI-83 Plus Silver Edition Manuale
Novell
Novell GROUPWISE 8 - INTERNET AGENT Manuale utente
Oracle
Oracle Application 9i Manuale utente
Acer
Acer RDM Manuale utente
Canon
Canon Vixia HF21 Manuale utente
Canon
Canon ZR950 Manuale utente
Samsung
Samsung Auto Backup Manuale utente
Polycom
Polycom Vortex EF2201 Istruzioni per l'installazione e il funzionamento
Brocade Communications Systems
Brocade Communications Systems Brocade 8/12c Manuale utente