Nortel Passport 8306 Manuale utente
Nortel Ethernet Routing Switch 8300
Installation — Chassis
Release: 4.1
Document Revision: 01.01
www.nortel.com
NN46200-309 324403-A Rev 01
.
Nortel Ethernet Routing Switch 8300
Release: 4.1
Publication: NN46200-309
Document status: Standard
Document release date: 16 June 2008
Copyright © 2008 Nortel Networks
All Rights Reserved.
Printed in Canada and the United States of America
LEGAL NOTICE
While the information in this document is believed to be accurate and reliable, except as otherwise expressly
agreed to in writing NORTEL PROVIDES THIS DOCUMENT "AS IS" WITHOUT WARRANTY OR CONDITION OF
ANY KIND, EITHER EXPRESS OR IMPLIED. The information and/or products described in this document are
subject to change without notice.
Nortel, the Nortel logo, the Globemark, and Passport are trademarks of Nortel Networks.
All other trademarks are the property of their respective owners.
ATTENTION
For information about the regulatory message, read "Regulatory Information and Safety Precautions"
in this guide.
For information about the software license, read "Software license" in this guide.
.
3
.
Contents
Regulatory Information and Safety Precautions 5
EN 55 022 Statements 6
EN 300386 Statement 6
European Union and European Free Trade Association (EFTA) Notice 7
Denan Statement (Japan/Nippon only) 10
Safety Messages 10
Notices 11
Software license 15
New in this release 19
Features 19
8005DC power supply 19
Dual input DC-DC switching power supply 19
Other changes 19
Document changes 19
Introduction 21
Navigation 21
Chassis installation fundamentals 23
Ethernet Routing Switch 8310 chassis 23
Ethernet Routing Switch 8306 chassis 25
Power supplies 26
Fan trays 27
Hardware requirements 28
Shipment contents 28
Successful installation verification 32
Ethernet Routing Switch 8310 and 8306 chassis installation 33
Chassis installation procedures 33
Chassis installation time requirements 35
Reducing the chassis weight 35
Installing the chassis on a flat surface 35
Procedure job aid: Chassis weight including components 36
Nortel Ethernet Routing Switch 8300
Installation — Chassis
NN46200-309 01.01 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.
4
Mounting the Ethernet Routing Switch 8310 and 8306 chassis in an equipment
rack 36
Procedure job aid: Maximum number of chassis installed in 7-foot rack 40
Installing the cable guides 40
Switch operations 43
Powering on DC power supplies 43
Powering on AC power supplies 44
Resetting the switch 45
Installing removable flash memory cards 46
Removing removable flash memory cards 47
Protecting memory card files 48
Part Numbers 51
Technical specifications 55
Ethernet Routing Switch 8310 chassis specifications 55
Physical specifications 55
Environmental specifications 56
International regulatory requirements 56
Ethernet Routing Switch 8306 chassis specifications 57
Physical specifications 57
Environmental specifications 58
International regulatory requirements 58
Ethernet Routing Switch 8301 AC power supply specifications 59
Ethernet Routing Switch 8302 AC power supply specifications 60
Ethernet Routing Switch 8005DC power supply specifications 61
Ethernet Routing Switch 8005DI DC power supply specifications 62
Translations of safety messages 63
Class A device caution statement 63
Electrostatic discharge caution statement 64
Nortel Ethernet Routing Switch 8300
Installation — Chassis
NN46200-309 01.01 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.
5
.
Regulatory Information and Safety
Precautions
Read the information in this section to learn about regulatory conformities
and compliances.
International Regulatory Statements of Conformity
This is to certify that the Nortel 8300 Series chassis and components
installed within the chassis were evaluated to the international regulatory
standards for electromagnetic compliance (EMC) and safety and were
found to have met the requirements for the following international
standards:
•EMC - Electromagnetic Emissions – CISPR 22, Class A
•EMC - Electromagnetic Immunity – CISPR 24
•Electrical Safety – IEC 60950, with CB member national deviations
Further, the equipment has been certified as compliant with the national
standards as detailed below.
National Electromagnetic Compliance (EMC) Statements of
Compliance
FCC Statement (USA only)
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the Federal Communications
Commission (FCC) rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy. If it is not installed and used in accordance
with the instruction manual, it may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case users will be required to take
whatever measures may be necessary to correct the interference at their
own expense.
Nortel Ethernet Routing Switch 8300
Installation — Chassis
NN46200-309 01.01 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.
6Regulatory Information and Safety Precautions
ICES Statement (Canada only)
Canadian Department of Communications Radio Interference
Regulations
This digital apparatus (8300 Series chassis and installed components)
does not exceed the Class A limits for radio-noise emissions from
digital apparatus as set out in the Radio Interference Regulations of the
Canadian Department of Communications.
Règlement sur le Brouillage Radioélectrique du Ministère des
Communications
Cet appareil numérique (8300 Series chassis) respecte les limites de bruits
radioélectriques visant les appareils numériques de classe A prescrites
dans le Règlement sur le brouillage radioélectrique du ministère des
Communications du Canada.
CE Marking Statement (Europe only)
EN 55 022 Statements
This is to certify that the Nortel 8300 Series chassis and components
installed within the chassis are shielded against the generation of radio
interference in accordance with the application of Council Directive
2004/108/EC. Conformity is declared by the application of EN 55 022
Class A (CISPR 22).
CAUTION
This device is a Class A product. Operation of this equipment
in a residential area is likely to cause harmful interference, in
which case users are required to take appropriate measures
necessary to correct the interference at their own expense.
EN 55 024 Statement
This is to certify that the Nortel 8300 Series chassis is shielded against the
susceptibility to radio interference in accordance with the application of
Council Directive 2004/108/EC. Conformity is declared by the application
of EN 55 024 (CISPR 24).
EN 300386 Statement
The Ethernet Routing Switch 8300 Series chassis complies with the
requirements of EN 300386 V1.3.3 for emissions and for immunity for a
Class A device intended for use in either Telecommunications centre or
locations other than telecommunications centres given the performance
criteria as specified by the manufacturer.
EC Declaration of Conformity
This product conforms to the provisions of the R&TTE Directive
1999/5/EC.
Nortel Ethernet Routing Switch 8300
Installation — Chassis
NN46200-309 01.01 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.
MIC notice for 8310, and 8306 chassis (Republic of Korea only) 7
European Union and European Free Trade Association (EFTA) Notice
All products labeled with the CE marking comply with R&TTE Directive
(1999/5/EEC) which includes the Electromagnetic Compliance (EMC)
Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC)
issued by the Commission of the European Community.
Compliance with these directives implies conformity to the following
European Norms (ENs). The equivalent international standards are listed
in parenthesis.
•EN 55022 (CISPR 22)–Electromagnetic Interference
•EN 55024 (IEC 61000-4-2, -3, -4, -5, -6, -8, -11)–Electromagnetic
Immunity
•EN 61000-3-2 (IEC 610000-3-2)–Power Line Harmonics
•EN 61000-3-3 (IEC 610000-3-3)–Power Line Flicker
VCCI Statement (Japan/Nippon only)
This is a Class A product based on the standard of the Voluntary Control
Council for Interference (VCCI) for information technology equipment.
If this equipment is used in a domestic environment, radio disturbance
may arise. When such trouble occurs, the user may be required to take
corrective actions.
BSMI Statement for 8310, and 8306 Chassis (Taiwan only)
This is a Class A product based on the standard of the Bureau of
Standards, Metrology and Inspection (BSMI) CNS 13438, Class A.
MIC notice for 8310, and 8306 chassis (Republic of Korea only)
This device has been approved for use in Business applications only per
the Class A requirements of the Republic of Korea Ministry of Information
and Communications (MIC). This device may not be sold for use in a
non-business application.
Nortel Ethernet Routing Switch 8300
Installation — Chassis
NN46200-309 01.01 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.
8Regulatory Information and Safety Precautions
National Safety Statements of Compliance
CE Marking Statement (Europe only)
EN 60 950 Statement
This is to certify that the Nortel 8300 Series chassis and components
installed within the chassis are in compliance with the requirements of EN
60 950 in accordance with the Low Voltage Directive. Additional national
differences for all European Union countries have been evaluated for
compliance. Some components installed within the 8300 Series chassis
may use a nickel-metal hydride (NiMH) and/or lithium-ion battery. The
NiMH and lithium-ion batteries are long-life batteries, and it is very possible
that you will never need to replace them. However, should you need to
replace them, refer to the individual component manual for directions on
replacement and disposal of the battery.
NOM Statement 8310 and 8306 Chassis (Mexico only)
The following information is provided on the devices described in this
document in compliance with the safety requirements of the Norma Oficial
Méxicana (NOM):
Exporter: Nortel Networks, Inc.
4655 Great America Parkway
Santa Clara CA 95054 USA
Importer: Nortel Networks de México, S.A. de C.V.
Avenida Insurgentes Sur #1605
Piso 30, Oficina
Col. San Jose Insurgentes
Deleg-Benito Juarez
México D.F. 03900
Tel: 52 5 480 2100
Nortel Ethernet Routing Switch 8300
Installation — Chassis
NN46200-309 01.01 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.
Información NOM (unicamente para México) 9
Fax: 52 5 480 2199
Input: (8306 and 8310 Chassis only)
8301AC: 100 to 240 VAC 16A 47 to 60 Hz per power supply
8301AC: 200 to 240 VAC 12 A 47 to 60 Hz per power supply
single supply, single supply + one redundant supply, two supplies, or two
supplies + one redundant supply configurations
8302AC: 100 to 240 VAC 12A 47 to 60 Hz per power supply
8302AC: 200 to 240 VAC 10A 47 to 60 Hz per power supply
single supply, single supply + one redundant supply, two supplies, or two
supplies + one redundant supply configurations
8005DIDC: 40 to 75 VDC, 48.75 to 32.5 A
single supply, single supply + one redundant supply, two supplies, or two
supplies + one redundant supply configurations
8005DC: 48 to 60 VDC, 42 to 34 A
single supply, single supply + one redundant supply, two supplies, or two
supplies + one redundant supply configurations
Información NOM (unicamente para México)
La información siguiente se proporciona en el dispositivo o en los
dispositivos descritos en este documento, en cumplimiento con los
requisitos de la Norma Oficial Méxicana (NOM):
Exportador: Nortel Networks, Inc.
4655 Great America Parkway
Santa Clara, CA 95054 USA
Importador: Nortel Networks de México, S.A. de C.V.
Avenida Insurgentes Sur #1605
Piso 30, Oficina
Col. San Jose Insurgentes
Deleg-Benito Juarez
México D.F. 03900
Tel: 52 5 480 2100
Nortel Ethernet Routing Switch 8300
Installation — Chassis
NN46200-309 01.01 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.
10 Regulatory Information and Safety Precautions
Fax: 52 5 480 2199
Embarcar a: (8306 and 8310 Chassis)
8301AC:100 to 240 VAC 16A 47 to 60 Hz por fuente de poder
8301AC: 200 to 240 VAC 12 A 47 to 60 Hz por fuente de poder
una fuente, una fuente + configuraciones de una fuente redundante, dos
fuentes o dos + configuraciones de una fuente redundante
8302AC:100 to 240 VAC 12A 47 to 60 Hz por fuente de poder
8302AC: 200 to 240 VAC 10 A 47 to 60 Hz por fuente de poder
una fuente, una fuente + configuraciones de una fuente redundante, dos
fuentes o dos + configuraciones de una fuente redundante
8005DIDC: 40 to 75 VDC, 48.75 to 32.5 A
una fuente, una fuente + configuraciones de una fuente redundante, dos
fuentes o dos + configuraciones de una fuente redundante
8005DC: 48 to 60 VDC, 42 to 34 A
una fuente, una fuente + configuraciones de una fuente redundante, dos
fuentes o dos + configuraciones de una fuente redundante
Denan Statement (Japan/Nippon only)
Safety Messages
This section describes the different precautionary notices used in this
document. This section also contains precautionary notices that you must
read for safe operation of the Nortel Ethernet Routing Switch 8300.
Nortel Ethernet Routing Switch 8300
Installation — Chassis
NN46200-309 01.01 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Nortel Interruttore
Nortel
Nortel 4524GT Guida rapida
Nortel
Nortel 8630GBR Guida di riferimento
Nortel
Nortel BayStack 380-24F 1000 Manuale di istruzioni
Nortel
Nortel 4600 Manuale utente
Nortel
Nortel Centillion EtherSpeed II Guida
Nortel
Nortel BayStack 100-S Guida
Nortel
Nortel 4050 Manuale utente
Nortel
Nortel Passport 8250 Manuale utente
Nortel
Nortel DMS-100 Series Manuale utente
Nortel
Nortel Versalar 15000 Guida rapida
Nortel
Nortel BayStack 5510-24T Manuale utente
Nortel
Nortel Passport 7400 Manuale
Nortel
Nortel 4500 FIPS Manuale utente
Nortel
Nortel 2230 Dimensioni
Nortel
Nortel NN47220-101 Manuale utente
Nortel
Nortel 425-48T Manuale utente
Nortel
Nortel 50 Series Manuale utente
Nortel
Nortel Passport 4400 Series Istruzioni per il montaggio
Nortel
Nortel CVX 1800 Manuale
Nortel
Nortel 3510-24T Manuale di istruzioni
