Nortel DMS-10 Manuale utente

DMS-10 and DMS-100 Families

Billing Media Converter II

Automatic Message Accounting Transmitter

1997 Quick Reference Guide

BMCA001 and up 02.01 Standard July 1997

297-6201-500

Your guide to:

• Maintenance commands

• Index Corruption Maintenance

• Replacement procedures

• PCA switch setting and jumper options

This Quick Reference Guide applies to all EMC chassis

(metal front door panels) Automatic Message Accounting

Transmitter (AMAT) style Billing Media Converter II (BMC II)

systems.

Other style BMC II systems cannot use this Quick

Reference Guide.

AMAT BMC II systems can be identified by the information

on their rear panel labels.

Catalog Number or Model Number:

NT8M0xxE (EMC Chassis models)

DMS-10 and DMS-100 Families

Billing Media Converter II

Automatic Message Accounting Transmitter

1997 Quick Reference Guide

Publication Number: 297-6201-500

Applicability: BMCA001 and up

Document Release: Standard 02.01

Date: July 1997

Printed in the United States of America

Northern Telecom Conﬁdential: The information contained in this

document is the property of Northern Telecom. Except as speciﬁcally

authorized in writing by Northern Telecom, the holder of this document shall

keep all information contained herein conﬁdential and shall protect same in

whole or in part from disclosure and dissemination to third parties and use

same for evaluation, operation, and maintenance purposes only.

Information is subject to change without notice. Northern Telecom reserves

the right to make changes in design or components as progress in

engineering and manufacturing may warrant. The DMS-100 version of this

equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules, and the radio interference

regulations of the Canadian Department of Communications. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment

generates, uses and can radiate radio frequency energy, and if not installed

and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.

DMS is a trademark of Northern Telecom.

iii

BMC II AMAT Quick Reference Guide

Publication history

May 1996 Standard 01.01.

First standard issue.

July 1997 Standard 02.01.

• Integrated the new Quick Reference Guide template into this document.

• Added the 1 and 2 GB disk drives to the BMC AMAT Front View ﬁgure

in BMC II AMAT Figures.

• Added DMS-10 and DMS-100 software and ﬁrmware ﬁles reference

tables to BMC II AMAT Figures.

• Modiﬁed Maintenance Commands with commands left out of ﬁrst

issue:

— DELFILE f v1 v2

— LSTDIR ALL SORT

— LSTDIR FILE f v1 v2

— IDXMAINT DIR CLOSED t LAST v

— IDXMAINT DIR CLOSED t NEXT v

— IDXMAINT EXAMINE t HDR s

— IDXMAINT EXAMINE LOG DATE d

— IDXMAINT EXAMINE LOG HOUR x

— IDXMAINT EXAMINE LOG MSG n

— BX25PARM t

— BX25PARM t v

— BX25PARM PRIHDR

— BX25PARM PRIHDRx

— DMSO p aa

— DMSP xxxx

— SETTERM TIMEOUT

— SETTERM TIMEOUT x

— DELETE f v1:v2.

• Added notes concerning the necessity to execute the LINIT and SIT-

DAT WRITE commands after modiﬁcation of the value of a command

in the CP Commands and Site Dependent Data Commands subsections

of the Maintenance Commands.

• Added a disk capacity and related number of total tracks available table

to the Disk Commands subsection of Maintenance Commands.

• Moved listing for VALPARM LOGHDR command from Site Data

Commands subsection to Testing Commands subsection of Maintenance

Commands.

• Added a CMD and STA code descriptions table to the TEC/DSI Com-

mands subsection of Maintenance Commands.

• Removed the Bus Terminator PCA from the list of valid PCAs in the

Miscellaneous PCA Replacement Procedure.

• Modiﬁed the Disk Drive Replacement Procedure section to support the

1 GB (Turbo and Non-Turbo) and 2 GB (Turbo only) disk drive systems

• Modiﬁed the BMC AMAT disk drive options table to reﬂect the proper

option settings for the 380 MB Non-Turbo disk drives and the new 1

and 2 GB disk drives in the Disk Drive Replacement Procedure.

297-6201-500 BMCA001 and up Standard 02.01 July 1997

• Added notes regarding the location of the defect map and HEAD and

CYLINDERS out of range to step 9 of the Install replacement disk

drive procedure in the Disk Drive Replacement Procedure.

• Added note concerning the placement of the J5 jumper to step 8 of the

Disk Crossover PCA Replacement Procedure.

• Added the following to the PCA Switch and Strap Settings:

— CPU LED display codes table

— EPROM PCA table

— 56K Interface PCA table

— Disk Interface PCA table

— SCSI Interface PCA table

— DSI PCA table

— TEC PCA table.

• Modiﬁed statements in various sections concerning ﬁrmware to verify

ﬁlename and release level prior to installation of replacement PCA.

• Modiﬁed PCA options statements in various sections to refer to the

PCA Switch and Strap Settings to verify settings prior to installation.

• Modiﬁed the start-up activity steps of various sections to indicate that

Turbo BMC and Non-Turbo BMC with 1 GB disk drive users should

wait for the CP S/W Loaded message to print.

• Modiﬁed the command sequence used to clear alarms on the standby

processor in various sections.

• Corrected various minor format and content errors throughout the docu-

ment.

BMC II AMAT Quick Reference Guide

Contents

BMC II AMAT Figures 1

Maintenance Commands 7

Alarm Commands 7

Boot Commands 7

CP Commands 8

File Manipulations Commands 10

Index Maintenance Commands 11

Miscellaneous Commands 12

Polling Link Adjustment Commands 12

Processor Activity Command 13

Program Version Commands 13

Site Dependent Data Commands 13

Statistics Commands 16

System Clock Commands 16

TEC/DSI Function Commands 17

Testing Commands 17

User Security Commands 18

Monitor Level Commands 19

Guide to Index Corruption Recovery 21

Version number missing from index, but is on disk 21

Recognition 21

Recovery 23

Sequence numbers not incrementing properly 24

Recognition 24

Recovery 26

AMAIDX OPEN ERROR:03 28

Miscellaneous PCA Replacement Procedure

(NT6M60xx, NT6M62xx, NT6M63xx, NT6M64xx,

NT6M66xx, NT6M70xx, NT6M89xx, or

NT6M90xx) 31

Disk Replacement Procedure 35

Removing the Faulty Disk Drive 35

Installing the Replacement Disk Drive 36

Disk Crossover PCA Replacement Procedure

(NT6M72xx/6M93xx) 41

Error Control II PCA Replacement Procedure

(NT6M65xx) 45

Error Control II Jumper PCA Replacement

Procedure (NTM609xx) 47

297-6201-500 BMCA001 and up Standard 02.01 July 1997

Power and Alarm Communications PCA

Replacement Procedure (NT6M84xx) 49

56K Crossover PCA Replacement Procedure

(NT6M48xx) 51

Power Supply Replacement Procedure

(NT6M71xx) 53

56K Interface PCA Replacement Procedure

(NT6M94xx) 57

PCA Switch and Strap Settings 61

List of Figures

BMC II AMAT Front View 1

DMS-10 Non-Turbo with 5 1/4” disk drives - Side View 2

DMS-10 Turbo (any) or Non-Turbo with 3 1/2” disk drives -

Side View 2

DMS-100/DCO Non-Turbo with 5 1/4” disk drives - Side

DMS-100 Turbo (any) or Non-Turbo with 3 1/2” disk drives -

Side View 3

Version number missing 22

Version number recovered 23

Sequence numbers not incrementing 25

Sequence numbering corrected 26

List of Procedures

Miscellaneous PCA replacement 31

Remove faulty disk drive 35

Install replacement disk drive 37

Disk Crossover PCA replacement (NT6M72xx or

NT6M93xx) 41

Error Control II PCA (NT6M65xx) replacement 45

Error Control II Jumper PCA (NTM609xx) replacement 47

Power and Alarm Communications PCA (NT6M84xx)

replacement 49

56K Crossover PCA (NT6M48xx) replacement 51

Power Supply (NT6M71xx) replacement 53

56K Interface PCA (NT6M94xx) replacement 57

Miscellaneous PCA replacement 29

Remove faulty disk drive 33

Install replacement disk drive 35

Disk Crossover PCA replacement (NT6M72xx or

NT6M93xx) 39

Error Control II PCA (NT6M65xx) replacement 43

Error Control II Jumper PCA (NTM609xx) replacement 45

Power and Alarm Communications PCA (NT6M84xx)

replacement 47

56K Crossover PCA (NT6M48xx) replacement 49

Power Supply (NT6M71xx) replacement 51

56K Interface PCA (NT6M94xx) replacement 55

vii

BMC II AMAT Quick Reference Guide

List of Tables

DMS-10 BMC AMAT software and firmware files 4

DMS-100 BMC AMAT software and firmware files 5

DCO BMC AMAT software and firmware files 6

Disk drive size and related number of tracks 10

Valid status values for CMD and STA bytes 17

Disk drive options 36

NT6M62xx CPU PCA 61

CPU LED display codes 61

NT6M63CA EPROM PCA 62

NT6M63CK, NT6M63DA, NT6M63DC, NT6M63FI, and

NT6M63FL EPROM PCA 63

NT6M60BA Quad SIO (Slot 6), BMC set to INTERNAL timing

and Polling Modem set to EXTERNAL timing 63

NT6M60BAQuadSIO(Slot 6),BMC setto EXTERNALtiming

and Polling Modem set to INTERNAL timing 64

NT6M60BA PTR SIO (Slot 7), BMC set to INTERNAL timing

and Polling Modem set to EXTERNAL timing 64

NT6M60BA PRT SIO (Slot 7), BMC set to EXTERNAL timing

and Polling Modem set to INTERNAL timing 65

Baud Rate Reference 65

NT6M84BA PWR/ALM Communications PCA, BMC set to

INTERNALtimingandPollingModemsettoEXTERNAL

timing 66

NT6M84BA PWR/ALM Communications PCA, BMC set to

EXTERNALtimingandPollingmodemsettoINTERNAL

timing 66

NT6M94xx 56K Interface PCA 67

NT6M66AC (MD) or NT6M66AH Disk Interface PCA 67

NT6M66BA SCSI Interface PCA 67

NT6M70AB DMS-100 DSI PCA 68

NT6M70BD DMS-100 DSI PCA 69

NT6M89AA DMS-10 TEC PCA 70

NT6M89AB and NT6M89BD DMS-10 TEC PCA 70

NT6M90xx 800 bpi DCO TEC PCA 71

NT6M90xx 1600 bpi DCO TEC PCA 72

viii

297-6201-500 BMCA001 and up Standard 02.01 July 1997

Altri manuali per DMS-10

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Nortel Sistema telefonico

Nortel

Nortel M420 Manuale utente

Nortel

Nortel BCM50 Manuale utente

Nortel

Nortel ICS 7.1 Manuale utente

Nortel

Nortel North American DMS-100 Manuale utente

Nortel

Nortel BCM50 Manuale utente

Nortel

Nortel BCM50 Manuale dell'operatore

Nortel

Nortel DMS-100 Series Manuale utente

Nortel

Nortel BCM1000 Manuale utente

Nortel

Nortel Business Communications Manager 2.5 Istruzioni operative

Nortel

Nortel BCM200 Manuale utente

Nortel

Nortel Norstar Modular ICS Manuale elenco delle parti

Nortel

Nortel FastRad Manuale utente

Nortel

Nortel BCM50 Manuale dell'operatore

Nortel

Nortel BCM50 2.0 Guida all'installazione

Nortel

Nortel Meridian Meridian 1 Manuale utente

Nortel

Nortel Companion MICS-XC Manuale utente

Nortel

Nortel BM450 Manuale utente

Nortel

Nortel BCM1000 Manuale del prodotto

Nortel

Nortel Meridian Meridian 1 Manuale utente

Nortel

Nortel Norstar SMDR6 Manuale utente

Nortel

Nortel Meridian Meridian 1 Manuale di istruzioni

Nortel

Nortel BCM50 Manuale utente

Nortel

Nortel Norstar Modular ICS Manuale elenco delle parti

Nortel

Nortel Meridian Meridian 1 Istruzioni per l'uso e l'installazione

Manuali Sistema telefonico popolari di altre marche

Teleco

Teleco Perfect Voice Tis 16 Manuale utente

AT&T

AT&T Network Adapter 25 Manuale utente

AVE

AVE AF902R-CE Manuale utente

Tynetec

Tynetec Advent xt Manuale utente

Ericsson

Ericsson DCT1800-S Manuale utente

NEC

NEC Electra Elite 192 Manuale utente

Alcatel

Alcatel EASY REFLEXES 4200 Manuale utente

Panasonic

Panasonic KX-TDA50 Manuale utente

Bticino

Bticino PABX 28D Manuale utente

NEC

NEC SL 2100 Manuale utente

Sonifex

Sonifex Phone In 6 Manuale di istruzioni

TransTel Communications

TransTel Communications TD-824i Istruzioni per il montaggio

Panasonic

Panasonic KX-TS25B Manuale utente

ASCOM

ASCOM TD 92375GB Manuale del proprietario

Karel

Karel MS26S Scheda informativa del prodotto

EnGenius

EnGenius DuraFon PRO Manuale utente

Teledat

Teledat X130 DSL Manuale utente

SpectraLink

SpectraLink MOG400 Manuale utente