Northern TVIAFBIR300 Scheda tecnica

Regulatory Informaon

FCC Informaon

FC C compliance:This equipment has been

tested and found to comply with the limits for a

digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide

reasonable protecon against harmful

interference when the equipment is operated in

a commercial environment. This equipment

generates, uses, and can radiate radio

frequency energy and, if not installed and used

in accordance with the instrucon manual, may

cause harmful interference to radio

communicaons. Operaon of this equipment in

a residenal area is likely to cause harmful

interference in which case the user will be

required to correct the interference at his own

expense.

FC C Condions

This device complies with part 15 of the F CC

Rules. Operaon is subject to the following two

condions:

1. This device may not cause harmful

interference.

2. This device must accept any interference

received, including interference that may

cause undesired operaon.

EU Conformity Statement

upon the purchase of equivalent new equipment,

or dispose of it at designated collection points.

For more information see:www.recyclethis.info.

2006/66/EC (baery direcve):This

product contains a baery that cannot

be disposed of as unsorted municipal

waste in the European Union.

See the product documentaon for speciﬁc

baery informaon. The baery is marked with

this symbol, which may include leering to

indicate cadmium (Cd), lead (Pb), or mercury (Hg).

For proper recycling, return the baery to your

supplier or to a designated collecon point. For

more informaon see: www.recyclethis.info.

2012/19/EU (WEEEdirecve):

Products marked with this symbol

cannot be disposed of as unsorted

municipal waste in the European

Union. For proper recycling, return

this product to your local supplier

This product and - if applicable - the

supplied accessories too are marked

with "CE" and comply therefore with

the applicable harmonized European

standards listed under the Low Voltage Direcve

2006/95/EC, theEMCDirecve 2004/108/ EC ,

the RoHS Direcve 2011/65/E U.

This series of camera adopts new generaon

sensor with high sensivity and advanced circuit

design technology It features high resoluon,.

low image distoron and low noise, etc , which.

makes it suitable for surveillance system and

image processing system.

HD1080p video output

0.1Lux @ (F1.2,AGC ON), 0 Lux with I R

5-50mm motorized VF lens, auto focus

Smart IR Mode

s are conﬁgurableOS D menu, parameter

Auto white balance, auto gain control, WDR funon

High performance 2MP CMOSsensor and high

resoluon bring high-quality image;

1 Introducon

1.1 Product Features

1.2 Overview

Thank you for purchasing our product. If there

are any quesons, or requests, please do not

hesitate to contact the dealer.

This manual applies to motorized vari-focal IR

bullet camera.

This manual may contain several technical

incorrect places or prinng errors, and the

content is subject to change without noce.

The updates will be added to the new version of

this manual. We will readily improve or update

the products or procedures described in the

manual.

Please refer to the product speciﬁcaon for

camera parameters and funcons.

Privacy Noce

Surveillance laws vary by jurisdicon. Check

all relevant laws in your jurisdicon before using

this product for surveillance purposes to ensure

that your use of this product conforms.

Industry Canada ICES-003 Compliance

This device meets the C AN ICES-3 (A)/NMB-3(A)

standards requirements.

1.2.1 Overview of Vari-Focal IR Bullet Camera

Figure 1-1 Overview of Bullet Camera

Device supports 12V DC and 24V AC power supply.

Heater funcon will only be enabled with 24V AC.

Power Cable

HD Video

Cable

CVBSCable

Mounng Base

Sun Shield

Motorized Vari-Focal Lens

2 Installaon

Before youstart:

Please make sure that the device in the package

is in good condion and all the assembly parts

are included.

Make sure that all the related equipment is

power-oﬀduring the installaon.

Check the speciﬁcaon of the products for the

installaon environment.

Check whether the power supply is matched

with your power output to avoid damage.

If the product does not funcon properly,

please contact your dealer or the nearest

service center. Do not disassemble the camera

for repair or maintenance by yourself.

2.1 Ceiling Mounng

1.Drill the screw holes and the cable hole in the

ceiling according to the supplied drill template.

2.Hammer the supplied plasc expansion bolt into

the screw holes.

Figure 2-1 Drill Template

Steps:

Ceiling Mounng

2 2

1:Screw Hole for

Bracket

2:Screw Hole for

Mounng Base

4-45°

Φ88.7

8-Φ5.0

3.Route the cables to the cable hole and connect

the corresponding cables.

4.Fix the camera to the ceiling with the supplied

PA4 screws.

TVIAFBIR300

HD-TVI Full HD 1080p Varifocal 300’ IR Bullet w/ Autofocus Lens

Rev. 040517



3625 Cincinnati Avenue, Rocklin, CA 95765

855-388-7422

www.northernvideo.com

Installation & Quick Setup Guide

3 Menu Operaon

Figure 3-1 Main Menu

DAY&NIGHTBACKLIGHT

INDOOR

OUTDOOR

ZOOM

SPEED SHUTTER

AGC

SENS-UP

BRIGHTNESS

D-WDR

DEFOG

BLC

HSBLC

ATW

AWC-SET

MANUAL

COLOR

B/W

TRIGGER

2D NR

3D NR

CAM

TITLE

D-EFFECT

MOTION

PRIVACY

DEFECT

HEAT

CTRL

SHARPNESS

MONITOR

LSC

PRESET

FOCUS

MODE

LENSINIT

ZOOM

VIEW

AFLIMIT

WDR

OFF

AUTO

You can call the menu and adjust the camera

parameters with the direcon buon or a coaxial

camera controller (purchase separately). You can

also call the menu with supported DVR.

3.1 VI D EO.OUT

PAL or NT SC is selectable .

3.2LANGUAG E

Chinese, English & French are selectable.

3.3 SETUP

3.3.1 SCENE

You can select indoor and outdoor scene modes

according to the working environments.

3.3.3EXPOSURE

EXPOSURE

1. EXPOSURE IRIS-PRI

2. SHUTTER AUTO

3. AGC OFF

4. SENS-UP---

5. BRIGHTNESS---|------ 40

6. D-WDR OFF

7. DEFOG OFF

8. RETURN RETURN

Figure 3-2 Exposure

EXPOSURE: Manual and IRIS-PRI are selectable.

SHUTTER: AUTO,1/25, 1/75, 1/100, 1/120…1/3.5k

, 1/6k, 1/10k, 1/20k and 1/30 kare selectable.

: You can set the AGC value from 0 to 15.AGC

: You can set the SEN S-UP to O FF or AUTO.SENS-U P

: You can set the brightness valueBRIGHTNESS

from 1 to 14.

You can set the D-WD R as O N or OFF.D-WDR:

: You can set the defog funcon as ON toDEFO G

enable the funcon. Posion, size, and the defog

gradaon are conﬁgurable.

3.3.4 Backlight

:WDRSet the W D R status as ON or OFF.

Backlight Compensaon (BLC):

Set the gain of B LC as High, Middle, or Low.-GAIN:

Press the up/down/le/right buon to-AREA:

deﬁne the B LC posion and size. SelectRET or

AG AIN to go back the BLC menu or re-deﬁne the

BL C area.

Restore the B LC sengs to the default.-Default:

HSBLC: Select an HSBLC area. Set theDISPLAY

status as O N. Press the up/down/le/right buon

to deﬁne the area posion and size. Set the HSB LC

LEVEL from 0 to 100. Select A L L DAY or Night for the

HS B LC mode. Set theBLA CK MASK status as ON or

OFF.

HSBLC

1. SELECTAREA 1

2. DISPLAY ON

3. LEVEL ---|------ 20

4. MODE ALL DAY

5. BLACK MASK ON

6. DEFAULT

7. RETURN RETURN

Figure 3-3 HSB LC

3.3.5 White Balance (WB)

MANUAL, AT W (Auto-tracking White Balance),

AWC→SET are selectable.

3.3.6 Day & Night

Auto, Trigger, Color, and B/W are selectable for

DAY andNIGHT switches. You can enable IRF in

trigger mode.

3.3.7 NR

: You can set 2D NR status as O N or OFF.2D NR

: Set the Smart N R status as ON and adjust3D NR

the 3D smart NR sensivity ranges from 0 to 100.

Set the 3D NR LEVEL ranges from 0 to 100. Set the

2D&3D NR

1. 2DNR OFF

2. 3DNR ON

3. RETURN RETURN

3D NR

1. SMART NR OFF

2. LEVEL------|--8 0

3. START. AGC -|--------10

4. END.AGC -|--------10

5. RETURN RETURN

Figure 3-4 NR

Figure 3-5 3D NR

3.3.8 SP ECIA L

Edit the camera tle on this secon.Camera Title:

D-eﬀect:

Set the freeze funcon as ON or OFF.-FREEZE:

OFF, MIRRO R, V-FLIP, and ROTAT E are-MIRR OR:

selectable for mirror.

Deﬁne the zoom rao of certain area-D-ZOOM:

from 2 to 62.

Set the N EG IMAGE as ON or OFF.-NEG.IMA GE:

SPECIAL

1. CAM TITLE OFF

2. D-DFFECT

3. MOTION OFF

4. PRIVACY OFF

5. DEFECT

6. HEATCTRL

7. RETURN RETURN

Figure 3-6 Special

MOTION

1. SELECT AREA 1

2. DISPLAY ON

3. SENSITIVITY----|---- 30

4. MOTION VIEW ON

5. DEFAULT

6. RETURNRETURN

Figure 3-7 Moon Detecon

Moon: Select a MOTION area. Set theDISPLAY

status as O N or OFF. Press the up/down/le/right

buon to deﬁne the posion and size of the area.

Set the S E NSITIVITY from 0 to 100. Set the

MOTIONVIEW status as ON or OFF.

Privacy: Select a PRIVAC Y area. Set theDISPLAY

status as INV, MOSAI C, CO LO R or OFF. Press the

up/down/le/right buon to deﬁne the posion

and size of the area. Up to 8 areas are conﬁgurable.

Defect:LIVE DPC and STATIC D P C are selectable

in this secon.

PRIVACY

1. SELECT AREA 1

2. DISPLAY MOSAIC

3. COLOR 10

4. TRANS. 1

5. DEFAULT

6. RETURN RETURN

ADJUST

1. SHARPNESS --------|15

2. MONITOR LCD

3. LSC OFF

4. RETURN RETURN

3.3.9 ADJUST

: Adjust the sharpness from 0 to 15.Sharpness

: Monitor CRT, and Monitor LCD areMonitor

selectable.

: Set the L S C status as ON or OFF.LSC

3.3.10 RE SET

Reset all the sengs to the default.

3.3.11EXIT

Press OK to exit the menu.

STA RT. AGC level as the threshold to enable AGC,

and set the E N D. AGC level as the threshold to

disable AG C.

Figure 3-8 Privacy MaskFigure 3-9 Adjust

3.3.2 LENS

The camera is equipped with 5-50mm motorized

vari-focal lens.

Click Zoom + and Zoom - on the DVR P TZ to zoom in

and zoom out. The camera automacally focuses

aer zooming in/out.

Move the cursor le/right to adjustZOOMSPEED:

the zoom speed.

PRESET: You can set, delete, and call the preset. 1

to 64 presets are conﬁgurable.

Figure 2-2 Fix the Camera to the Ceiling

Figure 2-4 3-axis Adjustment

Figure 2-5 Fix the Camera to the Wall

5.Rotate the cover of camera anclockwise and the

direcon buon, auxiliary video interface, and

the DIP switch show.

1.Direcon Buon

2.Auxiliary Video Output

3.DIP Switch

Figure 2-3 Image Adjustment

A small monitor can be connected to the auxiliary

video output to adjust the video.

DIP switch is used to enable/disable WDR funcon.

(By disabling WDR funcon, video output can be

realized by both CVBS output and HD video output.)

(By enabling WDR funcon, video output cannot be

realized by CVBS output.)

360°

90°

360°

6. Adjust the surveillance angle.

1). Loosen No.1 adjusng screw to adjust the pan

posion (0 ~ 360 ).° °

2). Loosen No.2 adjusng screw to adjust the

lng posion(0 ~ 90 ).° °

3). Loosen No.3 adjusng screw to adjust the

rotaon posion 0 ~ 360 .( ° ° )

4).Tighten the adjusng screws .

2.2 Wall Mounng

Steps:

1.Drill the screw holes and the cable hole in the

ceiling according to the supplied drill template.

2.Hammer the supplied plasc expansion bolt into

the screw holes.

3.Route the cables to the cable hole and connect

the corresponding cables.

4.Fix the camera to the ceiling with the supplied

PA4 screws.

5.Adjust the surveillance angle as shown in the

ﬁgure 2-4.

FOCUS MODE: Manual, Auto, and Trigger modes

are selectable. In auto mode, the camera focuses

automacally, and in manual mode, you can click

Zoom+ and Zoom- to focus.

You can reset the lens.LENSINI T:

AFLIMIT: 20m, 10m, 6m, 3m, 1.5m, 1m, 30cm, and

10cm are selectable as the Min. focus distance limit.

Enable the zoom view and the zoomZOOMVIEW:

rao displays while lens zooming in/out.

HEAT CTRL: AUTO, O N and OFF are selectable in

this secon.

Altri manuali Northern Telecamera IP

Northern

Northern HDDWMIR Manuale utente

Northern

Northern IP4WVFD Scheda tecnica

Northern

Northern IP4T Scheda tecnica

Northern

Northern IP3VFB Manuale utente

Northern

Northern IP4BIR100 Manuale utente

Northern

Northern NTH-IP3B Manuale utente

Northern

Northern NTH-IP3VFB Manuale utente

Northern

Northern NTH-IP3B Guida utente

Manuali Telecamera IP popolari di altre marche

FLIR

FLIR Exx series Manuale utente

Avigilon

Avigilon H4A-BO1-IR Manuale utente

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuale utente

ShareTech

ShareTech AV1 Manuale utente

Ezviz

Ezviz C6C Manuale utente

Melchioni

Melchioni UCAM 2015 Manuale utente

Geutebruck

Geutebruck G-Cam/ESD-4630 Manuale utente

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manuale utente

Mitel

Mitel 6800i Series Manuale di servizio

Vitek

Vitek VTC-IR403-212NP Manuale utente

THOMSON

THOMSON DSC - 323W Manuale utente

AVer

AVer FB2027 Manuale utente

ENFORCER

ENFORCER EV-T5105-N2SQ Manuale utente

Wansview

Wansview NC543 Manuale utente

Eneo

Eneo MCB-64A0003M0A Manuale utente

deView electronics

deView electronics CBDNI36F Manuale utente

Swann

Swann SwannEye Manuale utente

LevelOne

LevelOne IP CamSecure Manuale utente