Novus NVIP-ATM200 Manuale utente

U s e r ’s m a n u a l

NVIP-ATM200

NVIP-ATM200 User’s manual ver.1.0.

IMPORTANT SAFEGUARDS AND WARNINGS

EMC (2004/108/EC) and LVD (2006/95/EC ) Directives

CE Marking

Our products are manufactured to comply with requirements of the following directives and national regulations

implementing the directives:

 Electromagnetic compatibility EMC 2004/108/EC.

 Low voltage LVD 2006/95/EC with further amendment. The Directive applies to electrical

equipment designed for use with a voltage rating of between 50VAC and 1000VAC as well as

75VDC and 1500VDC.

WEEE Directive 2002/96/EC

Information on Disposal for Users of Waste Electrical and Electronic Equipment

This appliance is marked according to the European 1000VAC Directive on Waste Electrical and Electronic

Equipment (2002/96/EC) and further amendments. By ensuring this product is disposed of correctly, you will

help to prevent potential negative consequences for the environment and human health, which could otherwise

be caused by inappropriate waste handling of this product.

The symbol on the product, or the documents accompanying the product, indicates that this appliance may not be

treated as household waste. It shall be handed over to the applicable collection point for used up electrical and

electronic equipment for recycling purpose. For more information about recycling of this product, please contact

your local authorities, your household waste disposal service or the shop where you purchased the product.

RoHS Directive 2002/95/EC

Out of concern for human health protection and friendly environment, we assure that our products

falling under RoHS Directive regulations, regarding the restriction of the use of hazardous

substances in electrical and electronic equipment, have been designed and manufactured in

compliance with the above mentioned regulations. Simultaneously, we claim that our products have

been tested and do not contain hazardous substances whose exceeding limits could have negative

impact on human health or natural environment

Information

The device, as a part of professional CCTV system used for surveillance and control, is not designed for self

installation in households by individuals without technical knowledge.

Excluding of responsibility in case of damaging data on a disk or other devices:

The manufacturer does not bear any responsibility in case of damaging or losing data on a disk or other devices

during device operation.

WARNING!

PRIOR TO UNDERTAKING ANY ACTION THAT IS NOT DESCRIBED FOR THE GIVEN PRODUCT IN

USER’S MANUAL AND OTHER DOCUMENTS DELIVERED WITH THE PRODUCT, OR IF IT DOES

NOT ARISE FROM THE USUAL APPLICATION OF THE PRODUCT, MANUFACTURER MUST BE

CONTACTED UNDER THE RIGOR OF EXCLUDING THE MANUFACTURER’S RESPONSIBILITY FOR

THE RESULTS OF SUCH AN ACTION.

NVIP-ATM200 User’s manual ver.1.0.

IMPORTANT SAFEGUARDS AND WARNINGS

WARNING!

THE KNOWLEDGE OF THIS MANUAL IS AN INDESPENSIBLE CONDITION OF A PROPER

DEVICE OPERATION. YOU ARE KINDLY REQUSTED TO FAMILIRIZE YOURSELF WITH

THE MANUAL PRIOR TO INSTALLATION AND FURTHER DEVICE OPERATION.

WARNING!

USER IS NOT ALLOWED TO DISASSEMBLE THE CASING AS THERE ARE NO

USER-SERVICEABLE PARTS INSIDE THIS UNIT. ONLY AUTHORIZED SERVICE

PERSONNEL MAY OPEN THE UNIT

INSTALLATION AND SERVICING SHOULD ONLY BE DONE BY QUALIFIED SERVICE

PERSONNEL AND SHOULD CONFORM TO ALL LOCAL REGULATIONS

1. Prior to undertaking any action please consult the following manual and read all the safety and operating

instructions before starting the device.

2. Please keep this manual for the lifespan of the device in case referring to the contents of this manual is

necessary;

3. All the safety precautions referred to in this manual should be strictly followed, as they have a direct

influence on user’s safety and durability and reliability of the device;

4. All actions conducted by the servicemen and users must be accomplished in accordance with the user’s

manual;

5. The device should be disconnected from power sources during maintenance procedures;

6. Usage of additional devices and components neither provided nor recommended by the producer is

forbidden;

7. You are not allowed to use the camera in high humidity environment (i.e. close to swimming pools, bath tubs,

damp basements);

8. Mounting the device in places where proper ventilation cannot be provided (e. g. closed lockers etc.) is not

recommended since it may lead to heat build-up and damaging the device itself as a consequence;

9. Mounting the camera on unstable surface or using not recommended mounts is forbidden. Improperly

mounted camera may cause a fatal accident or may be seriously damaged itself. The camera must be mounted

by qualified personnel with proper authorization, in accordance with this user’s manual.

10. Device should be supplied only from a power sources whose parameters are in accordance with those

specified by the producer in the camera technical datasheet. Therefore, it is forbidden to supply the camera

from a power sources with unknown parameters, unstable or not meeting producer’s requirements;

NVIP-ATM200 User’s manual ver.1.0.

TABLE OF CONTENTS.....................................................................................................4

1. FOREWORD INFORMATION .....................................................................................6

1.1. General Characteristics........................................................................................6

1.2. NVIP-ATM200 tech specification ......................................................................7

1.3. Package contents..................................................................................................8

2. START-UP AND INITIAL IP CAMERA CONFIGURATION .................................9

2.1. Camera dimensions..............................................................................................9

2.2. Description of crucial connectors .......................................................................9

2.2. Camera installation ............................................................................................10

2.4. Starting the IP camera........................................................................................11

2.5. Initial configuration via the Web browser.........................................................13

3. NETWORK CONNECTION UTILIZING WEB BROSWER ................................14

3.1. Recommended PC specification for web browser .............................................14

3.2. Connection with IP camera via the Internet Explorer ........................................14

3.3. Connection with IP camera via the Mozilla Firefox ..........................................16

4. WWW INTERFACE - WORKING WITH IP CAMERA.........................................16

4.1. Displaying live pictures......................................................................................16

4.2. Camera configuration .........................................................................................19

4.2.1. System settings...........................................................................................20

a. System information...................................................................................20

b. User management .....................................................................................21

c. System update...........................................................................................22

4.2.2. Network......................................................................................................23

a. IP Settings.................................................................................................23

b. HTTPS......................................................................................................25

c. SNMP .......................................................................................................26

d. IP Filter.....................................................................................................27

e. QoS/DSCP ................................................................................................27

f. IEEE 802.1x ..............................................................................................28

g. DDNS .......................................................................................................29

h. Server (Mail,FTP,Samba).........................................................................30

TABLE OF CONTENTS

NVIP-ATM200 User’s manual ver.1.0.

4.2.3. A/V settings ............................................................................................... 32

a. Image setting ............................................................................................ 32

b. Video settings........................................................................................... 33

c. Audio settings .......................................................................................... 34

4.2.4. Event settings............................................................................................................. 35

a. Events....................................................................................................... 35

b. Schedule................................................................................................... 37

c. I/O Settings .............................................................................................. 38

e. Log list ..................................................................................................... 39

f. SD memory card....................................................................................... 39

5. ELECTRIC CONNECTORS AND ACCESORIES ................................................. 42

5.1. Description of camera connectors...................................................................... 42

5.2. SD card installation ........................................................................................... 43

5.3 List of supported SD cards.................................................................................. 44

6. RESTORING FACTORY DEFAULTS .................................................................... 45

6.1. Restoring software factory defaults ................................................................... 45

6.2. Restoring hardware factory defaults in IP cameras ........................................... 45

TABLE OF CONTENTS

NVIP-ATM200 User’s manual ver.1.0.

1. FOREWORD INFORMATION

1.1. General Characteristics

 Modular, compact camera module enables the installation of the reach of conventional cameras

 Electronic day/night function

 Imager resolution: 2.0 megapixels

 Min. Illumination: 0.1 lx/F=2.0 - color mode, 0.1 lx/F=2.0 - B/W mode

 Wide Dynamic Range (WDR)

 Digital Slow Shutter (DSS)

 Digital Noise reduction (DNR)

 Privacy zones: 3

 1 alarm input and 1 output

 Other functions: mirror , 180° image rotation, antifog

 Built-in webserver: video compression and real-time network transmission

 Compression: H.264, M-JPEG

 Video processing resolution:

- 1920 x 1080 (FullHD)

- 1280 x 720 (HD720)

- 640 x 480 (VGA)

- 320 x 240 (QVGA)

- 176 x 144 (QCIF)

 3 streams: compression, resolution, speed and quality

 RTP/RTSP protocol support for video transmission

 Network connection control and IP address check function

 Pre- & post-alarm functions - video recording in AVI format

 Schedule recording function

 Motion detection

 Support for mobile devices - 3GPP stream

 Bidirectional audio transmission

 Micro SD/SDHC card support

 Diverse definition of system reactions to alarm events: e-mail with attachment, saving file on FTP

or NAS server, saving file on SD/SDHC card, alarm output activation

 Software: NMS (NOVUS MANAGEMENT SYSTEM) for video recording, live monitoring,

playback and remote IP devices administration

 Power supply: 12 VDC/PoE (Power over Ethernet)

FOREWORD INFORMATION

NVIP-ATM200 User’s manual ver.1.0.

FOREWORD INFORMATION

1.2. NVIP-ATM200 specification

NVIP-ATM200

IMAGE

Pick-up Element 2 MPX, CMOS imager, 1/2.7”

Number of Effective Pixels 1920 (H) x 1080 (V)

Min. Illumination 0.1 lx/F=2.0 –color mode (AGC on)

0.1 lx/F=2.0 black/white mode (AGC on)

Digital Slow Shutter (DSS) x5

Digital Noise Reduction (DNR) Yes

Wide Dynamic Range 8 levels

LENS

Type Pinhole, f=4.3 mm/F=2.0

Angle of View (H) 73°

DAY/NIGHT

Type Elctronic day/night

Switch Mode Auto

NETWORK

Stream Resolution 1920 x 1080 (FullHD), 1280 x 720 (HD720), 640 x 480 (VGA),

320 x 240 (QVGA), 176 x 144 (QCIF)

Frame Rate 30 fps for each resolution

Multistreaming Mode 3 streams

Video/Audio Compression H.264, M-JPEG /G.711(32K,24K)

Number of Simultaneous Connections Max. 5

Network Protocols Support ONVIF(2.2), IPv6, IPv4, HTTP, HTTPS, SNMP, QoS/DSCP, Access list, IEEE

802.1X, RTSP, TCP/ IP, UDP, SMTP, FTP, PPPoE, DHCP, DDNS, NTP, UPnP,

3GPP, SAMBA, Bonjour

PC Software NOVUS NMS, Internet Explorer, Google Chrome, Opera, Mozilla Firefox

OTHER FUNCTIONS

OSD IE browser, Polish, English, Russian

Privacy Zones 3

Motion Detection Yes

Prealarm/Postalarm 0 - 5 s/ 0 –10 s

System Reaction to Alarm Events E-mail with attachment, saving file on: FTP server/NAS/memory card, alarm

output activation

INTERFACES

Video Output BNC,1.0 Vp-p, 75 Ohm- maintenance only

Audio Input/Output 1/1

Alarm Input/Output 1/1

Network Interface 1 x Ethernet - RJ-45 interface, 10/100 Mbit/s

Memory Card Slot microSD

INSTALLATION PARAMETERS

Dimensions (mm) Camera module : 36 (W) x 36 (H) x 20 (D)

Main module : 50 (W) x 27 (H) x 97.9 (D)

Cable lenght between modules : 3000

Weight 280 g

Enclosure Black, aluminium

Power Supply PoE,12 VDC

Power Consumption 2.88 W (DC 12V) , 4,32 W (PoE)

Operating Temperature 0°C ~ 45°C

NVIP-ATM200 User’s manual ver.1.0.

1.3. Package contents

After you open the package make sure that the following elements are inside:

 IP camera (two modules)

 Short version of user’s manual

If any of this elements has been damaged during transport, pack all the elements back into the original

box and contact your supplier for further assistance.

CAUTION!

If the device was brought from a location with lower temperature, please wait until it reaches the

temperature of location it is currently in. Turning the device on immediately after bringing it

from a location with lower ambient temperature is forbidden, as the condensing water vapour

may cause short-circuits and damage the device as a result.

Before starting the device familiarize yourself with the description and the role of particular

inputs, outputs and adjusting elements that the device is equipped with.

FOREWORD INFORMATION

NVIP-ATM200 User’s manual ver.1.0.

2. START-UP AND INITIAL IP CAMERA CONFIGURATION

2.1. Camera dimensions

Dimensions in millimeters. The length of the cable connected the camera module is 3 m.

2.2. Description of crucial connectors main module

START-UP AND INITIAL CAMERA CONFIGURATION

1. Alarm input/output and audio connections

2. RJ-45 connector for connecting camera module

3. 12 VDC Power socket

4. Analog video output for connecting BNC connector (maintance only)

5. Ethernet 100 Mb/s (RJ-45 connector)

12345

NVIP-ATM200 User’s manual ver.1.0.

START-UP AND INITIAL CAMERA CONFIGURATION

2.3. Camera installation

A) Select a location for the camera module and attach the stand to the base of the camera module with

the screw.

B) Place the camera between the forks stand and mount module with two screws.

C) Adjust the camera position and tighten the mounting screws

Indice

Lingue:

Altri manuali Novus Telecamera IP

Novus

Novus NVIP-5000 series Manuale utente

Novus

Novus NVIP-4DN3060H/IR-1P Manuale utente

Novus

Novus NVIP-5DN3600C-2P/F Manuale utente

Novus

Novus NVIP-6F-6301 Manuale utente

Novus

Novus NVIP-2Q-6101/PIR/W Manuale utente

Novus

Novus NVIP-TDN3401H/IR/MPX2.0 Manuale utente

Novus

Novus VIP-12DN7023V/IR-1P Manuale utente

Novus

Novus NVIP-2C5005CZ-P/GO Manuale utente

Novus

Novus NVIP-12DN5060V/IRH-2P Manuale utente

Novus

Novus NVAHD-2DN5104MH/IRH-2 Manuale utente

Novus

Novus NVIP-2DN5020SD/IRH-2 Manuale utente

Novus

Novus NVIP-2D-6502/F Manuale utente

Novus

Novus NVIP-5VE-6402M/F Manuale utente

Novus

Novus NVIP-4DN7000C-1P Manuale utente

Novus

Novus NVAHD-2DN3102SD/IR-1 Manuale utente

Novus

Novus NVIP-5000 series Manuale utente

Novus

Novus NVIP-7000 series Manuale utente

Novus

Novus NVIP-3DN3520SD/IRH-2 Manuale utente

Novus

Novus NVIP-3000 Series Manuale utente

Novus

Novus NVIP-3000 Series Manuale utente

Novus

Novus NVIP-2DN5001C-1P Manuale utente

Novus

Novus NVIP-2C2011D-P Manuale utente

Novus

Novus NVIP-3DN7540D/IRH-2P Manuale utente

Novus

Novus NVIP-1DN3000H/IR-1P-II Manuale utente

Manuali Telecamera IP popolari di altre marche

FLIR

FLIR Exx series Manuale utente

Avigilon

Avigilon H4A-BO1-IR Manuale utente

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuale utente

ShareTech

ShareTech AV1 Manuale utente

Ezviz

Ezviz C6C Manuale utente

Melchioni

Melchioni UCAM 2015 Manuale utente

Geutebruck

Geutebruck G-Cam/ESD-4630 Manuale utente

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manuale utente

Mitel

Mitel 6800i Series Manuale di servizio

Vitek

Vitek VTC-IR403-212NP Manuale utente

THOMSON

THOMSON DSC - 323W Manuale utente

AVer

AVer FB2027 Manuale utente

ENFORCER

ENFORCER EV-T5105-N2SQ Manuale utente

Wansview

Wansview NC543 Manuale utente

Eneo

Eneo MCB-64A0003M0A Manuale utente

deView electronics

deView electronics CBDNI36F Manuale utente

Swann

Swann SwannEye Manuale utente

LevelOne

LevelOne IP CamSecure Manuale utente