Nubeo MAKO Manuale utente
EN
3
EN
4
This timepiece is equipped with a self-winding Mechanical Automatic
movement.
It does not need a battery. It is powered by the motions of the user’s own
wrist during the wear of the watch automatically. You may also choose to
wind the watch manually.
Before wearing your watch, make sure to wind it clockwise with 10 rotations
of the crown.
For good measure gently move the watch side to side around 30 times to see
the seconds hand run at its normal speed.
Please make sure to remember that during a period when you are not
wearing the watch, the power reserve of movement will wear down and you
will have to re-wind the watch again before wearing.
AUTOMATIC WATCHES
EN
5
This watch is equipped with a screw down crown . Do not pull the crown
unless it is unscrewed rst.
PLEASE READ THE FOLLOWING BEFORE UNSCREWING THE CROWN
TO UNSCREW: Turn the crown anti-clockwise until it
turns freely without tension. Gently pull the crown out
to the other desired positions for watch setting (see
specic operating instructions on the following pages).
SCREW-DOWN CROWN
TO SCREW: Push the crown all the way in (towards the
watch) then begin to turn clockwise until it is securely
screwed down.
Note: Failure to securely screw down the crown after
setting the watch may affect its water resistance.
EN
6
As your watch has a screw down crown feature, release the watch from the
screw-down position before setting.
AUTOMATIC 3 HANDS
EN
7
1. Pull the crown out to position 2, its maximum extension. The second
hand will stop moving.
2. Turn the crown either clockwise or anti-clockwise until the watch hands
are positioned at the desired time.
3. When the desired time is reached push the crown back to position 1 and
screw down if applicable.
TIME SETTING
EN
8
2
1Flip the cover
Press the buttons
on the clasp sides
HOW TO USE A DEPLOYMENT CLASP
EN
9
All Nubeo timepieces are designed with a minimum water resistance rating
of 5 ATM (50m). The water-resistance of a timepiece protects the movement
from dust, moisture, and risk of damage to the movement should it be
immersed in water.
Please see chart for guidelines for the recommended exposure of various
water ratings.
It is important not to attempt to adjust the position of the crown while the
timepiece is in contact with water. Water can enter the case causing damage
to the movement.
For timepiece with screw-down crowns, it is important to ensure the crown
is in the proper position and completely locked before contact with water.
For timepieces with chronograph functions, do not engage the chronograph
under water, as water may leak in the case and cause damage to the
movement.
WATER RESISTANT
EN
10
USE PRECAUTIONS - RESISTANCE TO WATER
All Nubeo timepiece are designed to withstand use as indicated on the following
chart. Always make sure the crown is screwed-down completely before use.
Questo manuale è adatto per i seguenti modelli
35
Indice
Lingue:
Altri manuali Nubeo Orologio
Nubeo
Nubeo Manta Abalone Manuale utente
Nubeo
Nubeo DEIMOS Manuale utente
Nubeo
Nubeo Curiosity NB-6043 Manuale utente
Nubeo
Nubeo MAGELLAN SILVERY BLACK Manuale utente
Nubeo
Nubeo CURIOSITY Manuale utente
Nubeo
Nubeo ODYSSEY BLACK Manuale utente
Nubeo
Nubeo Mars Manuale utente
Nubeo
Nubeo SIRIUS TOURBILLON Manuale utente
Nubeo
Nubeo MEGALODON Manuale utente
Nubeo
Nubeo Mariner Manuale utente
