Numark Audacity Aggiornamento firmware
AUDACITY
Software Installation
(ENGLISH) – (1-21)
Instalación del software
(ESPAŃOL) – (23-43)
Installation du logiciel
(FRANÇAIS) – (45-65)
Installazione software
(ITALIANO) – (67-87)
Software Installation
(DEUTSCH) – (89-108)
1
Software Installation
Audacity Recording Software
Table of Contents
General Software Notes.................................................... 2
Audacity Software Installation ........................................... 3
Before Starting the Software............................................. 3
Configuring your PC to work with the USB turntable.............. 4
Audacity Configuration on PC ............................................ 6
Configuring Audacity for Mac OS 10.4 and above.................. 8
Recording into the Computer........................................... 10
Adjusting Your Audio Level (Optional)............................... 11
Cleaning Your Audio (Optional)........................................ 12
High Speed Recording of your Vinyl (Optional)................... 15
Dividing Your Album into Tracks....................................... 16
Export Tracks to Separate Files........................................ 18
Listening and Exporting to WAV/MP3 ................................ 19
Recording 78RPM Records............................................... 19
2
General Software Notes
Your USB turntable is compatible with any recording software that
supports USB Audio devices. We have included Audacity, however you
may prefer to use a variety of 3rd party software packages.
Audacity is free software, distributed under the General Public License
(GPL). More information as well as open source code can be found on
the CD included or on the web at http://audacity.sourceforge.net
Audacity works on both Windows (98 and greater) as well as Mac OS (X
and 9.2+). Software for Linux can be found on the Audacity website.
Go to http://audacity.sourceforge.net/help/tutorials for additional
tutorials.
The website also has information for separate add-ons to Audacity to
enhance performance and features.
3
Audacity Software Installation
Before Starting the Software
Make sure that your USB turntable is plugged into the computer with the
supplied USB cable, and both the computer and the turntable are
plugged in and on. Refer to the USB turntable quick start instruction
manual included before proceeding with software installation.
REMOVE THE CLEAR PLASTIC CARTRIDGE (NEEDLE) COVER
For your first recording, we recommend that you perform a test on
about a minute or less of audio to become familiar with the process
before recording a full LP.
To Install Software (PC)
1. Plug in your turntable to an AC outlet and connect the USB port
on the USB turntable to the USB port of your computer.
2. Turn your computer on and allow it to boot fully if it is not on
already.
3. Turn on the power switch to your turntable.
4. Your computer will say that Windows detects a new device and
that it is available to use.
5. Insert the CD that came with your USB turntable.
6. Run the file “install audacity-win-1.2.3.exe”.
7. Optional: install SoundSoap 2 Demo by clicking on folder and
opening “setup.exe”
To Install Software (MAC)
1. Insert the included CD
2. Open the CD icon on the desktop.
3. Drag the installation folder for audacity to your hard drive. We
recommend that you move the folder to your “Applications”
folder.
4. A window will come up which shows the files copying.
5. EJECT the CD.
6. Optional: Install additional trial software included on the CD.
4
Configuring your PC to work with the USB turntable
1.) With no programs or windows open, click on [START] –Settings -
Control Panel.
2.) In the Control Panel, double-click on ‘Sounds and Audio
Devices’.
3.) Ensure your computer’s soundcard is shown in the ‘Volume’ tab.
5
4.) Click on the ‘Audio’ tab. Ensure your computer’s soundcard is
listed as the default Sound Playback Device, and ‘USB Audio
Codec’ is listed as your default Sound Recording Device.
5.) Click on the ‘Voice’ tab. Ensure your computer’s soundcard is
listed as the default Sound Playback Device, and ‘USB Audio
Codec’ is listed as your default Sound Recording Device.
6.) If active, press the [Apply] button and then press [OK]. If the
[Apply] button is not active, simply press [OK].
7.) Close the ‘Sounds and Audio Device Properties’ window.
8.) Ensure your headphones or speakers are plugged into your
computer’s soundcard’s output to monitor your recordings and
edits.
6
Audacity Configuration on PC
1. Go to [START] –> All Programs –> Audacity to launch
Audacity.
2. Select the “Edit” menu and then “Preferences”.
Figure 1: Select Preferences
7
The “Audacity Preferences” window will come up (Figure 2). Select the
USB audio device under the “Recording” selection as shown. Select
“Software Playthrough” to hear the audio while recording.
Note: The USB turntable may show up with a different name in the
preference window. This may depend on your computer model and
operating system. 99% of the time it will contain “USB” in the Name.
Note: Please also make sure that your default sound card is selected in
the “Playback” section. Otherwise, you will not be able to hear any
audio output from the program.
Figure 2: Select USB Audio Device from Preferences
If you would like to record in stereo, click on the pull-down tab next to
‘Channels:’ and select ‘2 (Stereo)’.
Click ‘OK’.
Now that your preferences are set, you are ready to record.
If you are still having difficulty finding the USB Turntable, try opening up
your system settings or control panel to adjust audio input settings from
the sound control panel. Also see the troubleshooting section at the end
of this manual.
8
Configuring Audacity for Mac OS 10.4 and above
When using Audacity with OS-10.4 and above, first open the Apple
AUDIO MIDI SETUP control panel which should be located in your
UTILITIES folder. Using the buttons at the top, select the AUDIO
DEVICES window.
Connect your TTUSB, DO NOT open Audacity yet.
You will notice that some of the settings in the AUDIO MIDI SETUP
window change to reflect settings for the USB device. (If not, go to
PROPERTIES FOR => and select USB AUDIO CODEC in the pull down
window.)
You can now open Audacity. When Audacity loads, you will again notice
that the format settings for both the inputs and outputs will change in
the AUDIO MIDI SETUP window. These settings will be in error, and will
not give you proper audio performance. In fact, each time Audacity is
opened this reset will occur.
To work around this problem, wait until Audacity opens and performs
the erroneous format reset outlined above, then you simply have to
select the desired format settings manually in the AUDIO MIDI SETUP
window.
1) FIRST make ALL of your desired format settings in Audacity. These
are found under AUDACITY MENU =>PREFERENCES => AUDIO I/O =>
Set Channels for 2 (Stereo), and playthrough on or off (Choose “On” if
you want to listen while recording.)
2) Next, while still in AUDACITY MENU =>PREFERENCES, click the
QUALITY tab and set the default Sample Rate and the default Sample
Format (44100, 16-bit)
3) Click OK to save all of the preferences settings.
4) Next set the PROJECT RATE in the lower left corner of the Audacity
window to match your desired sample rate (usually 44100 or 48000).
5) In the AUDIO MIDI SETUP window on the input side, first select 2 ch-
16 bit, then select your sample rate. (Usually 44100 or 48000 Hz). Then
do the same on the output side.
Indice
Lingue:
Manuali Software popolari di altre marche
PS Audio
PS Audio PowerPlay Manuale del proprietario
Brady
Brady LOCKOUT PRO 3.0 Manuale di servizio
Avaya
Avaya Interaction Center Manuale utente
Texas Instruments
Texas Instruments TI-83 Plus Silver Edition Manuale
Novell
Novell GROUPWISE 8 - INTERNET AGENT Manuale utente
Oracle
Oracle Application 9i Manuale utente
Acer
Acer RDM Manuale utente
Canon
Canon Vixia HF21 Manuale utente
Canon
Canon ZR950 Manuale utente
Samsung
Samsung Auto Backup Manuale utente
Polycom
Polycom Vortex EF2201 Istruzioni per l'installazione e il funzionamento
Brocade Communications Systems
Brocade Communications Systems Brocade 8/12c Manuale utente