Nurofen Fever Smart Manuale utente
INSTRUCTIONS FOR USE
TEMPERATURE MONITOR
兒童體溫監測儀
使用說明
* Accurate within ±0.2°C with correct usage. Environmental factors & child’s position may result in greater variance in accuracy
Accurate*
準確
Temperature notifications
體溫提示
追蹤服藥記錄
Medicine tracking
ENGLISH
Page 1
Page 2-4
Page 5
Page 6
Page 7
Page 8-9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15-16
Page 17
Page 18
Page 19
Page 20
Page 21-24
Page 25
• What’s in the Box
• Getting started
• Apply the Monitor to your Child
• Bluetooth Range Booster
• Important
• FeverSmart™temperature - Guidance
• FeverSmart™temperature Screens
• Notifications
• The FeverSmart™App
• End of your Temperature Session
• Base Station Charging Lights
• Intended Use and Precautions
• Troubleshooting
• Technical Specification
• Certification and Disclaimer
• Battery Removal (for disposal only)
• Electromagnetic Compatibility (EMC) Table
• Definition of Symbols
CONTENTS Page
8320085
ENGLISH
WHAT’S IN THE BOX?
1
Please read the instructions carefully before using FeverSmart™ Temperature Monitor.
Keep the instructions in a safe place for future reference.
MONITOR
This is placed on your
child to measure
their temperature
We recommend you familiarise yourself with the Monitor and App ahead of your child developing a fever
BASE STATION
1. Boosts Bluetooth
®
signal
from Monitor to phone
2. Charges the Monitor
in-between uses
3. A carry case for the Monitor
and adhesive patches
DOUBLE SIDED
ADHESIVE PATCH
This is stuck on the Monitor
to attach the Monitor to
your child
AAA BATTERIES
Fit in the back of
the Base Station
ENGLISH
Download the FeverSmart™ App
Create an account and prole for your
child.
Insert batteries to Base Station
To take the Monitor out of sleep mode, place it on
the Base Station for at least 15 seconds once the
batteries have been inserted. The LED light will then
turn on.
The Monitor is pre-charged, however check battery
life once your phone is paired with the App.
Please refer to Page 13 for more guidance on
Base Station lights.
12
GETTING STARTED
2
3
ENGLISH
Pair Monitor and Phone
If you haven’t already done so, go
into your child’s prole and press
Start.
Hold the Monitor close to your phone
and tap the button to start pairing.
Ensure the Monitor is not placed in the
Base Station when pairing.
3Enter 8 digit key
This is located on the inside
of the Base Station tray.
4
GETTING STARTED
ENGLISH
Apply Adhesive Patch to Monitor
Locate the side of the Adhesive Patch backing
labelled ‘1’
Remove both parts of the backing, as
shown above.
Then stick it onto the grey side of the Monitor,
ensuring it is aligned to the metal sensor.
Remove the backing on the side
labelled ‘2’
Ensure both parts of the backing is
removed, as shown above.
56
GETTING STARTED
Please take the time to view the ‘How to Video’ in the App which will take you
through the step by step process on how to apply the Monitor to your child.
4
ENGLISH
Locate the metal sensor
This will need to be placed in
your child's armpit.
Stick the Monitor to your child
Ensure the Monitor is positioned
correctly with the metal
sensor in their armpit
Apply light pressure to the
Monitor if needed to ensure it is
securely in place.
Warm-Up & Use
The Monitor will then warm up.
This can take up to 8 minutes.
During warm up and use ensure
the child’s arm is covering
the end of the Monitor with
the metal sensor.
Please refer to the trouble shooting questions in the settings section of the App, or call customer service if any issues
occur during setup. For customer service contact details visit nurofen.com and select your country
1 2 3
APPLY THE MONITOR TO YOUR CHILD
5
ENGLISH
The Base Station boosts the Bluetooth®signal from the Monitor.
The Base Station must be kept within
1.5m/4.5ft from the
Monitor in order for it to boost the signal effectively.
Please ensure the Base Station is out of reach of the child
BLUETOOTH®RANGE BOOSTER
6
ENGLISH
7
IMPORTANT
Bluetooth®communication consumes phone battery, ensure your phone is sufciently
charged to stay powered throughout the use period, or plug it in when in use.
You can leave the App at any time, however do not close the App down as your
temperature session will be lost.
Ensure Push Notications are enabled on your phones settings, and your phone is not
muted or on ‘do not disturb.’ FeverSmart™’s critical notications (such as
temperature alerts) cannot work without Push Notications. For FeverSmart™ to assist you
in monitoring your child, you must enable these in your device’s Settings menu.
Remember to check on your child regularly for signs and symptoms of illness
Ensure your child’s arm is down and covering the temperature sensor at all times.
ENGLISH
FEVERSMART™ TEMPERATURE – GUIDANCE
8
FeverSmart™ is designed to accurately
measure armpit temperature which is
approximately 1°C lower than core
body temperature or 0.5°C
lower than an ear or oral
temperature.
This is completely normal because
temperatures differ according to site
of measurement on the body.
Core body temperature +1ºC
Ear/Oral temperature +0.5ºC
Armpit temperature
Indice
