Oce Cm3522 Manuale utente

Océ

cm3522/

cm2522

Enlarge Display

Operations

User’s Guide

Printing for

Professionals

Océ cm3522/cm2522 x-1

Introduction

Thank you for choosing this machine.

The Océ cm3522/cm2522 User’s Guide [Enlarge Display Operations] contains

details on the operation of the various functions available in the Enlarge

Display mode of the Océ cm3522/cm2522 and on the various operating

precautions. In order to ensure that this machine is used correctly and

efficiently, carefully read the Enlarge Display Mode Operations volume of the

User’s Guide before using the machine.

In order to operate the machine safely and properly, be sure to read the Quick

Guide [Copy/Print/Fax/Scan/Box Operations].

For descriptions on trademarks and copyrights, refer to [Trademarks/

Copyrights].

Views of the actual equipment may be slightly different from the illustrations

used in this User’s Guide [Enlarge Display Operations].

Explanation of manual conventions

7 CAUTION

CAUTION

%Failure to observe instructions highlighted in this manner may result in serious

injuries or property damage.

Observe all cautions in order to ensure safe use of this machine.

Reminder

Text highlighted in this manner indicates operation precautions. Carefully read

and observe this type of information.

!Detail

Text highlighted in this manner provides more detailed information concerning

operating procedures and other descriptions.

Note

Text highlighted in this manner indicates sections containing additional

information. If necessary, refer to the indicated sections.

Océ cm3522/cm2522 x-2

[ ]

Names highlighted as shown above indicate keys on the control panel and

buttons in the touch panel.

Océ cm3522/cm2522 x-3

Contents

1 Before use

1.1 Names of control panel parts and their functions ................... 1-2

1.2 Adjusting the angle of the control panel ................................... 1-4

1.2.1 To adjust the angle of the control panel ......................................1-4

1.3 Screens in Enlarge Display mode .............................................. 1-6

1.3.1 Displaying screens in Enlarge Display mode ...............................1-6

1.4 Touch panel ................................................................................. 1-8

1.4.1 Touch panel operation .................................................................1-8

1.4.2 Icons that appear in the screen ...................................................1-8

1.4.3 Paper type icons ..........................................................................1-9

1.4.4 Paper supply icons ....................................................................1-10

1.5 Feeding the original .................................................................. 1-11

1.5.1 Loading the original into the ADF ..............................................1-11

1.5.2 Placing the original on the original glass ...................................1-12

1.6 Specifying original settings ...................................................... 1-14

1.6.1 Copying originals of mixed sizes ("Mixed Original" setting) ......1-14

1.6.2 Loading folded originals ("Z-Folded Original" setting) ..............1-16

1.6.3 Selecting the original orientation (Original Direction settings) ...1-18

1.6.4 Selecting the position of the binding margin

(Original Binding Position/Binding Position settings) ................1-20

2 Using copy functions

2.1 General copy operation .............................................................. 2-2

2.2 Selecting a Color setting ............................................................ 2-4

2.3 Selecting the Paper settings ...................................................... 2-6

2.3.1 Automatically selecting the paper size ("Auto" Paper setting) ....2-6

2.3.2 Manually selecting the desired paper size ...................................2-8

2.4 Specifying a Zoom setting ......................................................... 2-9

2.4.1 Selecting a zoom ratio ...............................................................2-10

Océ cm3522/cm2522 x-4

2.5 Selecting original and copy settings ....................................... 2-11

2.5.1 Selecting single-sided or double-sided copies .........................2-12

2.6 Selecting a combined copy setting ......................................... 2-14

2.7 Selecting Finishing settings ..................................................... 2-16

2.7.1 Selecting the finishing method ..................................................2-17

2.7.2 Selecting Staple/Punch settings ................................................2-18

2.7.3 Selecting a folding or binding setting ........................................2-20

2.8 Selecting not to rotate the image ............................................ 2-22

2.9 Selecting the quality of the original ......................................... 2-23

2.10 Selecting the density settings .................................................. 2-26

2.10.1Adjusting the print density (Density settings) ............................2-26

2.10.2Adjusting the background density

(Background Removal settings) .................................................2-27

2.11 Selecting the Paper settings .................................................... 2-29

2.11.1Selecting a Paper Type setting ..................................................2-29

2.11.2Printing double-sided copies manually .....................................2-32

2.11.3Selecting a Paper Size setting ...................................................2-34

2.12 Scanning the next original to be copied while a copy job is

being printed (next job reservation) ........................................ 2-37

2.13 Pausing scanning/printing ....................................................... 2-38

2.14 Printing a proof to check the settings (Proof Copy) .............. 2-39

3 Using fax/scan functions

3.1 General fax/scan operation ........................................................ 3-2

3.2 Specifying a destination ............................................................. 3-4

3.2.1 Selecting a destination from the address book ...........................3-5

3.2.2 Selecting a destination from the job log ......................................3-7

3.2.3 Selecting a destination with an LDAP search ..............................3-8

3.2.4 Directly typing in the number .....................................................3-10

3.3 Specifying scanning settings (Scan Settings) ........................ 3-13

3.3.1 Simplex/Duplex ..........................................................................3-13

3.3.2 Original Type ..............................................................................3-15

Océ cm3522/cm2522 x-5

3.3.3 Resolution ..................................................................................3-17

3.3.4 Density .......................................................................................3-19

3.3.5 File Type ....................................................................................3-20

3.3.6 Color (Image Adjust) ..................................................................3-22

3.3.7 Background Removal (Image Adjust) ........................................3-24

3.3.8 Scan Size ...................................................................................3-26

3.3.9 Original Settings ........................................................................3-27

3.4 Using a program ....................................................................... 3-30

3.5 Checking the destinations ....................................................... 3-32

4 Logging on and logging off

4.1 When a logon screen appears ................................................... 4-2

4.1.1 When the screen to enter the user name appears ......................4-2

4.1.2 When the screen to enter the account name and password

appears ........................................................................................4-5

Océ cm3522/cm2522 x-6

1Before use

Océ cm3522/cm2522 1-2

Before use 1

1 Before use

1.1 Names of control panel parts and their functions

Note

For details, refer to the User’s Guide [Copy Operations], the User’s Guide

[Network Scan/Fax/Network Fax Operations].

No. Part name Description

1 Touch panel Displays various screens and messages.

Specify the various settings by directly touching the

panel.

2 Main Power indicator Lights up in green when the machine is turned on with

the main power switch.

3 [Power] (auxiliary power)

key

Press to turn on/off machine operations. When turned

off, the machine enters a state where it conserves

energy.

4 [Mode Memory] key Programmed fax/scan settings can be recalled to be

used again. (See p. 3-30)

5 [Utility/Counter] key Press to display the Meter Count screen and the Utility

screen.

12 11 8

10 9

Océ cm3522/cm2522 1-3

Before use 1

6 [Reset] key Press to clear all settings (except programmed settings)

entered in the control panel and touch panel.

7 [Stop] key Pressing the [Stop] key during an operation temporarily

stops the operation.

8 [Proof Copy] key Press to print a single proof copy to be checked before

printing a large number of copies. (See p. 2-39)

9 [Start] key Press to start the operation. When this machine is ready

to begin the operation, the indicator on the [Start] key

lights up in blue. If the indicator on the [Start] key lights

up in orange, the operation cannot begin.

Press to restart a stopped job.

10 Data indicator Flashes in blue while a print job or fax is being received.

Lights up in blue while a print job or fax is queued to be

printed or is being printed.

11 [C] (clear) key Press to clear a value (such as the number of copies, a

zoom ratio, or a size) entered using the keypad.

12 Keypad Use to type in the number of copies to be produced.

Use to type in the zoom ratio.

Use to type in the various settings.

13 [Enlarge Display] key Press to enter or exit Enlarge Display mode.

14 [Accessibility] key Press to display the screen for specifying settings for

user accessibility functions.

15 [Power Save] key Press to enter Low Power mode. While the machine is in

Low Power mode, the indicator on the [Power Save] key

lights up in green and the touch panel goes off. To

cancel Low Power mode, press the [Power Save] key

again.

16 [Access] key If user authentication or account track settings have

been applied, press this key after entering the user name

and password (for user authentication) or the account

name and password (for account track) in order to use

this machine.

17 Brightness dial Use to adjust the brightness of the touch panel.

18 [Fax/Scan] key Press to enter Fax/Scan mode.

While the machine is in Fax/Scan mode, the indicator on

the [Fax/Scan] key lights up in green.

19 [Copy] key Press to enter Copy mode. (As a default, the standard-

sized Copy mode screen is displayed.)

While the machine is in Copy mode, the indicator on the

[Copy] key lights up in green.

No. Part name Description

Altri manuali per cm3522

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Oce Stampante tutto in uno

Manuali Stampante tutto in uno popolari di altre marche

Triumph Adler

Triumph Adler DC 2016 Manuale

Epson

Epson WorkForce WF-2510 Guida utente

Epson

Epson Stylus Scan 2000 Manuale di installazione e funzionamento

Epson

Epson PictureMate Snap PM 240 Manuale di istruzioni

Konica Minolta

Konica Minolta bizhub C35 Manuale utente

Brother

Brother MFC-J430w Manuale utente

Konica Minolta

Konica Minolta BIZHUB 558 Manuale utente

Lexmark

Lexmark MX710 Series Manuale

Brother

Brother MFC-9760 Manuale utente

Lexmark

Lexmark XC8155 Manuale utente

Lexmark

Lexmark X642E Manuale utente

Sharp

Sharp MX-2310U Guida

Aficio

Aficio 200 Manuale utente

Canon

Canon ImageCLASS 2300 Manuale

Ricoh

Ricoh Pro C900 Manuale utente

Lexmark

Lexmark X925 Manuale utente

Brother

Brother Business Smart MFC-J4510dw Manuale utente

Epson

Epson Stylus CX8400 Series Manuale utente

Oce cm3522 Manuale utente

Manuali Stampante tutto in uno popolari di altre marche