Oce VarioPrint 6000 MICR+ series Manuale utente
Operation guide
Océ VarioPrint® 6000 MICR+ line
Copyright
© 2011-2013, Océ
All rights reserved. No part of this work may be reproduced, copied, adapted, or transmitted in
any form or by any means without written permission from Océ.
Océ makes no representation or warranties with respect to the contents hereof and specifically
disclaims any implied warranties of merchantability or fitness for any particular purpose.
Furthermore, Océ reserves the right to revise this publication and to make changes from time to
time in the content hereof without obligation to notify any person of such revision or changes.
Edition 2013-06 US
Trademarks
List of trademarks
Océ, VarioPrint, PRISMAaccess, PRISMAprepare, PRISMAproduction and DPlink are registered
trademarks of Océ-Technologies B.V.
Xerox, DocuTech, DigiPath and FreeFlow are registered trademarks of Xerox Corporation.
Adobe and PostScript are registered trademarks of Adobe Systems Incorporated.
Products in this publication are referred to by their general trade names. In most, if not all cases,
these designations are claimed as trademarks or registered trademarks of their respective
companies.
Contents
Chapter 1
Introduction.........................................................................................................................7
Notes for the reader.........................................................................................................................................8
Introduction to the Océ VarioPrint® 6000 MICR+ line...................................................................................9
Introduction to the main system components.............................................................................................10
Available documentation...............................................................................................................................12
Chapter 2
Transaction printing.........................................................................................................13
Introduction to the Transaction section .......................................................................................................14
Output recovery in case of an error..............................................................................................................17
Activate transaction printing.........................................................................................................................20
Deactivate transaction printing.....................................................................................................................21
Activate the MICR mode................................................................................................................................22
Shift the image in the transaction printing mode........................................................................................24
Handle the media messages - How to handle the Media message in the tray-to-tray mode..................25
Handle the media messages - How to handle the Media message in the tray-to-media mode.......26
Create a transaction setup - How to create a new transaction setup.........................................................27
Create a transaction setup - How to change the IPDS parameters......................................................27
Create a transaction setup - How to change the PCL parameters.......................................................29
Create a transaction setup - How to modify a transaction setup.........................................................30
Chapter 3
MICR fonts.........................................................................................................................31
MICR fonts.......................................................................................................................................................32
Chapter 4
MICR Toner........................................................................................................................33
Check the status of the toner reservoirs.......................................................................................................34
Add toner........................................................................................................................................................35
Appendix A
Miscellaneous....................................................................................................................37
Product specifications....................................................................................................................................38
Index...................................................................................................................................41
Contents
5
Contents
6
Chapter 1
Introduction
Notes for the reader
Introduction
This manual helps you to use the Océ VarioPrint® 6000 MICR+ line. The manual contains a
description of the product and guidelines to use and operate the Océ VarioPrint® 6000 MICR+
line.
Definition
Attention-Getters
Parts of this manual require your special attention. These parts can provide the following:
• Additional general information, for example, information that is useful when you perform a
task.
• Information to prevent personal injuries or property damage.
Symbols used in this manual
The following symbols are used in this manual to explain procedures, restrictions, handling
precautions, and instructions that should be observed for safety.
Overview of the attention-getters
Word Icon Indicates
WARNING Indicates a warning concerning operations that may
lead to death or injury to persons if not performed
correctly. To use the machine safely, always pay at-
tention to these warnings.
CAUTION Indicates a caution concerning operations that may
lead to injury to persons if not performed correctly.
To use the machine safely, always pay attention to
these cautions.
IMPORTANT Indicates operational requirements and restrictions.
Be sure to read these items carefully to operate the
machine correctly and to avoid damaging the ma-
chine or property.
NOTE Indicates a clarification of an operation or contains
additional explanations for a procedure. Reading
these notes is highly recommended.
Indicates an operation that must not be performed.
Read these items carefully and make sure not to
perform the described operations.
Notes for the reader
8Chapter 1 - Introduction
Introduction to the Océ VarioPrint® 6000 MICR+ line
Introduction
The Océ VarioPrint® 6000 MICR+ line is a series of high-volume, cut-sheet printers. These printers
support magnetic ink character recognition (MICR). MICR printing is intended primarily for
transaction printing of valuable documents like cheques. A magnetic reader can read documents
printed with MICR toner.
The Océ VarioPrint® 6000 MICR+ line uses the Océ Gemini Instant Duplex Technology. This
technology enables the machine to print MICR toner on both the front side and the back side of a
sheet at the same time. Depending on your version, the sustained print speed ranges from 170,
200 to 250 images per minute (A4 / Letter) when you print a 2-sided document. The print speed
for 1-sided documents (A4/Letter) is 125 images per minute.
The Océ VarioPrint® 6000 MICR+ line prints only with MICR toner. A combination of MICR toner
and regular toner is not possible. However, you can also print regular documents with MICR
toner.
This section gives a short description of the main features of the printer.
Overview of the main features
• Support of magnetic ink character recognition (MICR) printing
• Océ Gemini Instant Duplex Technology that enables the printing of both sides of a sheet at the
same time.
• Advanced scheduling concept on the operator panel to keep the machine running.
• Load and assign the media while the printer prints.
• Unload the media while the printer prints
• Assign the media while the printer warms up, after the printer is initialized.
• Support of up to 12 paper trays (total input capacity up to 13,800 sheets) and a roll feeder.
• Support of up to 3 stackers, a finisher and other external finishers.
• Support of a large range of media, media sizes and media weights.
• Support of secure printing.
• Support of IPDS/PS/PCL/PDF and streaming PS.
•Support of a large range of software products, for example the Océ PRISMA series, Xerox®
FreeFlow®.
• Support of RDO files via Océ DP Link.
Introduction to the Océ VarioPrint® 6000 MICR+ line
Chapter 1 - Introduction 9
Introduction to the main system components
Introduction
The following illustration shows the main system components. The table describes the main
components.
1
2
3
4
3
12
56 6 7
4
[1] The main system components
The main system components
Component Function
1 Operator panel The operator panel helps you with your daily work, for
example the scheduling of the jobs. Furthermore, the
operator panel helps you solve errors or perform main-
tenance tasks.
2 Operator attention
light
The operator attention light enables you to check the
status of the system from a distance.
3 Roll feeder (optional) A roll feeder is an optional device that adds paper input
capacity to your printer. When you use a roll feeder, you
can only use 1 or 2 paper modules. A combination of 3
paper modules and a roll feeder is not possible. The op-
erator panel displays the roll feeder and gives feedback
about the status of the roll feeder. For example whether
the roll is full or empty. Please refer to the documenta-
tion of the roll feeder manufacturer for more informa-
tion, for example about replacing an empty roll.
4 Paper module The paper module contains 4 paper trays. The paper
trays contain the media that will be printed. The default
configuration of the system contains 1 paper module.
You can add 1 or 2 additional paper modules to the de-
fault configuration to increase the media input capacity.
5 Engine module The engine module contains the components that print
the media. Access to the engine module is only required
when a paper jam occurs or when maintenance is re-
quired. The doors at the left-hand side and right-hand
side of the engine module give access to the toner units.
6 PrintGuard modules The PrintGuard modules are required for MICR printing.
The PrintGuard modules postfuse the prints. 4
Introduction to the main system components
10 Chapter 1 - Introduction
Indice
Altri manuali Oce Stampante
Oce
Oce TCS500 Istruzioni per l'installazione
Oce
Oce PlotWave 300 Manuale utente
Oce
Oce arizona 1240 GT Manuale utente
Oce
Oce im4511 Manuale utente
Oce
Oce CS 5070 Manuale utente
Oce
Oce PlotWave 450 Manuale di installazione e funzionamento
Oce
Oce VarioLink 6022 Manuale utente
Oce
Oce Arizona 365 GT Manuale utente
Oce
Oce CS620 Pro Manuale di istruzioni
Oce
Oce PlotWave 750 Manuale utente
Oce
Oce TDS400 Manuale di servizio
Oce
Oce ColorWave 600 Manuale utente
Oce
Oce Arizona T220UV Manuale utente
Oce
Oce sx1481 Manuale utente
Oce
Oce Arizona 30 Manuale operativo
Oce
Oce CS6407 Manuale utente
Oce
Oce VarioStream 9000 Manuale utente
Oce
Oce Arizona 550 GT Manuale utente
Oce
Oce CS2136 Manuale utente
Oce
Oce Arizona 660 XT UV Manuale utente
