OHAUS Scout STX Manuale utente
Quick Start Guide Scout STX Balances
Ohaus Corporation www.ohaus.com i Scout STX Balances
Carefully remove your Scout balance and each of its components from the package.
Store the packaging material to ensure safe storage and future transport.
Included Components:
Balance Pan
Quick Start Guide Stacking & Storage Cover (not applicable for 1mg models)
Warranty Card Calibration Mass (only for models up to 620g capacity)
AC Ada
p
ter & Plu
g
Place on a firm, steady surface with sufficient space. Avoid excessive air current,
vibrations, heat sources, or rapid temperature changes.
Turn the pointer 90 counter-
clockwise.
Rectangular pan: Place diagonally
on sub-platform and rotate counter-
clockwise until it locks.
Round pan: Set straight down on
subplatform.
Connect the AC Adapter to the
balance input jack.
Battery Installation
Install the Four (LR6) batteries
(not included) with polarity as shown
in the battery compartment.
When operating on batteries, long
press the power button for up to 10
seconds to power on.
AC Adapter Jack
Unlocked
Position
Locked
Position
Battery
Compartment
Subplatform Transportation
Lock Pointer
Quick Start Guide Scout STX Balances
Ohaus Corporation www.ohaus.com vii Scout STX Balances
Connecting the Interface
Use an optional interface connectivity kit to
connect the balance either to a computer,
printer or OHAUS auxiliary display.
Below Interface kit accessories are available:
RS232, USB Host, USB Device, Ethernet,
Bluetooth*.
Interface connection on the rear of
the balance:
* Interface kits may vary according to local regulations
Weigh Below Hook
The weigh below hook is located at the reverse side of the battery cover as shown.
To use this feature, remove the red protective cover underneath for the weigh below
opening.
Interface connection
AC Adapter Jack
Security Slot
Weigh below protective
cover
Weigh
below
hook
Guía de inicio rápido Balanzas Scout STX
Ohaus Corporation www.ohaus.com i Balanzas Scout STX
Retire cuidadosamente del embalaje la balanza Scout y cada uno de sus
componentes. Guarde el material de embalaje en un lugar seguro para transportar
la balanza posteriormente.
Balanza Plato
Guía de inicio rápido Masa de calibración (solo para modelos de
hasta 620 g de capacidad)
Tarjeta de garantía Cubierta para apilado y almacenamiento
(no aplicable a los modelos de 1 mg)
Adaptador de CA y enchufe
Coloque la balanza sobre una superficie firme y con suficiente espacio. Evite el
exceso de corrientes de aire, vibraciones, fuentes de calor o cambios bruscos de
temperatura.
Gire el puntero 90 en sentido
antihorario.
Puntero de bloqueo de transporte
Plato rectangular: Coloque el plato
diagonalmente sobre la sub-
plataforma y gire en sentido
antihorario hasta que encaje.
Plato redondo: Colóquelo derecho
hacia abajo sobre la sub-plataforma.
Conecte el adaptador de CA al
conector de entrada de la balanza.
Instalación de las baterías
Instale las cuatro baterías "AA" (LR6,
no incluidas) con la polaridad que se
indica en el compartimento de
baterías.
Cuando opere con baterías,
mantenga presionado el botón de
encendido por hasta 10 segundos
para encender.
Conector de entrada de adaptador de CA
Posición de
desbloqueo
Posición de
bloqueo
Compartimento
de baterías
Altri manuali per Scout STX
2
Indice
Altri manuali OHAUS Scala
OHAUS
OHAUS Emerald Manuale utente
OHAUS
OHAUS C51XE6R Manuale utente
OHAUS
OHAUS PS Series Manuale utente
OHAUS
OHAUS Valor 1000 Manuale utente
OHAUS
OHAUS 1500 Series Manuale utente
OHAUS
OHAUS EXPLORER Manuale utente
OHAUS
OHAUS Pioneer Balances Manuale utente
OHAUS
OHAUS Valor 3000 Manuale utente
OHAUS
OHAUS RE-C series Manuale utente
OHAUS
OHAUS Ranger Manuale utente
OHAUS
OHAUS Scout STX Series Manuale utente
OHAUS
OHAUS 5000 Manuale utente
OHAUS
OHAUS Scout STX Manuale operativo
OHAUS
OHAUS EXPLORER Manuale utente
OHAUS
OHAUS Pioneer Manuale utente
OHAUS
OHAUS ranger 7000 Manuale utente
OHAUS
OHAUS Valor 3000 Manuale utente
OHAUS
OHAUS DEFENDER SERIES Manuale utente
OHAUS
OHAUS Scout SKX Manuale utente
OHAUS
OHAUS Compact Series Manuale utente
