OKIDATA C 9000 Istruzioni di installazione e manutenzione
AbsoluteCOLOR • AbsoluteBLACK • UniDrums • UniRollers • UniParts • UniCoatings
OKIDATA C 9000 / 9500 REMANUFACTURING INSTRUCTIONS
AbsoluteCOLOR®• AbsoluteBLACK®• UniDrums • UniRollers • UniParts • UniCoatings
11124 Washington Blvd., Culver City, California U.S.A. 90232 Ph: 310 280-9620 • Fx: 310 838-7294 • [email protected]
© 2005 Uninet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. Uninet Imaging does not guarantee or warrant downloaded information.
USA
+1-310-280-9620
+1-310-838-7294
Ph:
Fx:
JAPAN
+81-3-44-55-2789
+1-310-838-7294
EUROPE
+34-93-757-1335
+34-93-741-4166
BRAZIL
+55-11-4822-3033
+55-11-4822-3353
ARGENTINA
+54-11-4571-2388
+54-11-4574-3706
www.uninetimaging.com
1. Release the toner hopper from the
drum unit by turning the blue handle
down from its upright “locked” position
as shown.
2. Blue handle in its downright
“unlocked” position.
3. Lift the hopper from the drum unit,
starting from the blue-handle side as
shown, then set aside.
OKIDATA C 9000 COLOR PRINTER W/TONER CARTRIDGE
CARTRIDGE BACK TOP
CARTRIDGE FRONT BOTTOM
CARTRIDGE FRONT TOP
UNINET IMAGING INC. •OKIDATA C 9000 / 9500 REMANUFACTURING INSTRUCTIONS
11124 Washington Blvd., Culver City, California U.S.A. 90232 Ph: 310 280-9620 • Fx: 310 838-7294 • [email protected]
© 2005 Uninet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. Uninet Imaging does not guarantee or warrant downloaded information.
USA
+1-310-280-9620
+1-310-838-7294
Ph:
Fx:
JAPAN
+81-3-44-55-2789
+1-310-838-7294
EUROPE
+34-93-757-1335
+34-93-741-4166
BRAZIL
+55-11-4822-3033
+55-11-4822-3353
ARGENTINA
+54-11-4571-2388
+54-11-4574-3706
www.uninetimaging.com
10. Slide the the end cap out by
approximately. two inches. The drum
axle is connected to it.
9. Remove the two screws that hold the
end cap (gearless) in place as shown.
11. The PCR can now be removed as
shown.
4. Remove the two screws located on
the the top of the drum unit cover that
hold it in place.
5. Use a small flathead screwdriver to push in the five tabs located on the back
and front of the cartridge to unlock the drum unit cover.
6. Remove the drum unit cover as
shown.
7. Remove the two screws that hold the
doctor blade in place as shown.
8. Carefully lift one side of the doctor
blade, then the other.
BACK FRONT
UNINET IMAGING INC. •OKIDATA C 9000 / 9500 REMANUFACTURING INSTRUCTIONS
11124 Washington Blvd., Culver City, California U.S.A. 90232 Ph: 310 280-9620 • Fx: 310 838-7294 • [email protected]
© 2005 Uninet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. Uninet Imaging does not guarantee or warrant downloaded information.
USA
+1-310-280-9620
+1-310-838-7294
Ph:
Fx:
JAPAN
+81-3-44-55-2789
+1-310-838-7294
EUROPE
+34-93-757-1335
+34-93-741-4166
BRAZIL
+55-11-4822-3033
+55-11-4822-3353
ARGENTINA
+54-11-4571-2388
+54-11-4574-3706
www.uninetimaging.com
19. Remove the Drum Erase Lamp
holder by pulling it off as shown.
18. Remove the two screws on both
ends of the wiper blade that hold it in
place.
20. Remove the wiper blade as shown.
12. Remove the Drum Erase Lamps as
shown.
13. Slide the end cap with axle out
completely.
14. Remove the screws on the remain-
ing end cap (gearside) that hold it in
place.
15. Remove the end cap with gears as
shown.
16. Remove the developer roller as
shown.
17. Remove the OPC drum as shown.
UNINET IMAGING INC. •OKIDATA C 9000 / 9500 REMANUFACTURING INSTRUCTIONS
11124 Washington Blvd., Culver City, California U.S.A. 90232 Ph: 310 280-9620 • Fx: 310 838-7294 • [email protected]
© 2005 Uninet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. Uninet Imaging does not guarantee or warrant downloaded information.
USA
+1-310-280-9620
+1-310-838-7294
Ph:
Fx:
JAPAN
+81-3-44-55-2789
+1-310-838-7294
EUROPE
+34-93-757-1335
+34-93-741-4166
BRAZIL
+55-11-4822-3033
+55-11-4822-3353
ARGENTINA
+54-11-4571-2388
+54-11-4574-3706
www.uninetimaging.com
21. Pull out the fuse holder located on
the side of the cartridge.
NOTES
22. After cleaning and refilling the car-
tridge, replace the fuse and reassem-
ble the cartridge by following the steps
in reverse order.
Questo manuale è adatto per i seguenti modelli
1
Altri manuali OKIDATA Stampante
OKIDATA
OKIDATA ML393Plus Manuale utente
OKIDATA
OKIDATA OKIFAX 5700 Manuale utente
OKIDATA
OKIDATA Pacemark 3410 Manuale utente
OKIDATA
OKIDATA DOC-IT3000 Manuale utente
OKIDATA
OKIDATA MICROLINE ML590 Manuale utente
OKIDATA
OKIDATA ML390 Turbo Manuale utente
OKIDATA
OKIDATA Microline 395 Come usare
OKIDATA
OKIDATA ML320 Turbo Manuale utente
OKIDATA
OKIDATA ML390 Turbo Manuale utente
OKIDATA
OKIDATA Microline 93 Manuale utente
OKIDATA
OKIDATA PT330 Istruzioni per l'installazione
OKIDATA
OKIDATA ML380 Manuale utente
OKIDATA
OKIDATA B6300 Istruzioni di installazione e manutenzione
OKIDATA
OKIDATA OL600e Istruzioni per la costruzione
OKIDATA
OKIDATA Okipage 16n Manuale utente
OKIDATA
OKIDATA ML320 Turbo Manuale utente
OKIDATA
OKIDATA OKIPAGE 20 Manuale utente
OKIDATA
OKIDATA OKIOFFICE 44 Manuale utente
OKIDATA
OKIDATA C 7000 Istruzioni di installazione e manutenzione
OKIDATA
OKIDATA ML184Turbo Manuale utente
