OKPOS Optimus Manuale utente
OKPOS Optimus Service Manual
2
Contents
Before Using the Product
Read this rst 4
Safety Information 4
Information on Copyrights 5
Overview
What’s in the Box 6
System Overview 7
Front 7
Rear and I/O ports 8
Adjusting LCD Angle 9
Installation
Connecting Peripherals 10
Removing the I/O port cover 10
Removing the stand’s rear cover 11
Connecting peripheral devices 11
Connecting the power cord 12
Replacing the I/O port cover 12
Replacing the stand’s rear cover 13
Installing Optional Devices 14
Card reader (IC & MSR) 14
VFD 16
LCD Customer Display 17
COM and SATA sub-board 20
Turning the SYSTEM On/O 21
Turning On 21
Turning O 21
System Disassembly
Disassembling the System 22
➊Removing the cover 22
➋Removing the COM and SATA
sub-board (optional) 25
➌Removing the main board 26
➍Removing the touch panel 27
➎Removing the LCD module 28
Re-assembling the System 29
Components Replacement 30
Replacing the M.2 SSD 30
Replacing the memory module (RAM) 32
Replacing the CMOS battery 34
Replacing the SSD (optional) 35
Application Programs
Drivers 37
Utilities 37
3
Setting Up the Touch Screen 37
Setting Up the Card Reader 41
Running the setup program 41
Track setting 42
Sound setting 42
I/Button setting 43
Error code setting 43
Setting Up the VFD 44
Setting Up the LCD Customer Display 46
System Setup (BIOS) 48
Entering Setup 48
BIOS action keys 48
Main menu 49
Feature menu 49
Advanced menu 50
Chipset menu 53
Security menu 54
Boot menu 56
Save & Exit menu 57
HDD Recovery 58
System Boards
Main Board 59
Mainboard layout 59
I/O Ports of Main B/D 61
Jumper Settings 61
Headers and connectors 62
Touch Control B/D 66
Specications 66
Board Layout 67
COM and SATA Sub-board (optional) 68
Board Layout 68
Connector Descriptions 68
Cable Pin Assignment
LVDS Cable 70
MSR/IC Cable 71
COM1 Cable 71
COM2 Cable 72
COM3 Cable 72
COM4 Cable 73
Specications
General 74
Main Board 75
4
Before Using the Product
Read this rst
Before using your system, please read this Manual carefully, and keep it on hand for future
reference.
●
The contents of this manual may be changed without notice.
●
Depending on the system model and type, some parts of this manual may dier from the actual
product.
●
The basic drivers and utilities that come with your system are subject to change.
●
OKPOS assumes no responsibility for damages resulting from a use of the product that is not
approved by OKPOS, or failure to follow the precautions and instructions provided in this User
Manual.
●
As some of the storage space is used for the system OS and built-in software, the actual capacity
available is less than the storage capacity listed in the product specications. In addition, the
amount of available space may vary after you perform system OS and software updates.
Safety Information
Please observe the following safety instructions to protect your computer from damage and ensure
your personal safety.
●
Do not install the system in a location that is wet, damp, or near water. This may cause a re or an
electrical shock.
●
Only use the system in the specied power environment. The system may not work, and may
even cause a re, if it is used with a dierent power source or equipment, or in a country that has
dierent power specications.
●
Make sure the plug is not bent or crushed by a heavy object. A damaged plug can cause a re or an
electrical shock.
●
Do not modify or extend the power cable. Cable damage may cause an electrical shock or re.
Before Using the Product
| Information on Copyrights
5
●
Do not use a damaged power cord or plug, or a loose outlet. These may cause a re, short circuit,
or electrical shock.
●
Do not install the system in a location where it is likely to overheat or where it will be exposed to
direct sunlight. Ensure the system is kept a safe distance away from any heating device. Installation
in such locations could cause damage to the cabinet and the electronic components.
●
Do not drop or apply any strong shock to the system. This may cause damage to the system and
the SSD or HDD installed inside it.
●
Do not use a sharp-pointed object on the display or apply excessive pressure to the display. This
may cause damage to the touch LCD display.
●
Do not block or cover slots or openings in the system cabinet. These have been provided for
ventilation, to prevent the system from overheating.
●
Do not use this system on a bed, sofa, rug or other similar surface.
●
Never insert any object into the system through the cabinet openings, as they may touch
dangerous voltage points or short out parts, which could result in a re or electrical shock.
●
Never spill liquid of any kind on the product.
●
Unplug the system from the electrical power outlet before cleaning. Clean the system, using a
damp or dry cloth. Do not use abrasives, kerosene, benzene, thinner, hydrochloric acid, or hot
water, and do not use a tough sponge or a brush, as these may cause discoloration or deterioration
of the cabinet.
●
Use only a 3-wire grounding type plug to avoid electric shock and damages due to short circuits.
●
If you have to use an extension cord, make sure that the total amperage rating of all equipment
plugged into it does not exceed the amperage rating of the extension cord and only use a 3-wire
grounding extension cord with a 3-prong grounding plug and outlet.
Information on Copyrights
●
Copyright © 2018 OKPOS Co., Ltd.
●
This manual is protected under international copyright laws. No part of this manual may be
reproduced, distributed, translated, or transmitted in any form or by any means without the prior
written permission of OKPOS Co., Ltd.
●
OKPOS and Optimus are registered trademark of OKPOS Co., Ltd.
●
Windows 7/10 is a registered trademark of Microsoft.
●
All other trademarks and copyrights are the property of their respective owners.
6
Overview
What’s in the Box
The package include the following items.
Optimus system
COM 1/2/3/4 cables(1.2 m x 2, 0.35 m x 2)
Quick Start Guide AdaptorPower cable
NOTE:
⦁
If any of the above is missing, please contact the customer center.
⦁
Only use devices with this system that have been supplied or approved by OKPOS. If you use a device supplied
by another provider that is not approved, your system may malfunction or not work.
⦁
The appearance and specications of the system and accessories may be changed without notice.
⦁
If you misplace one of the included components and want to purchase a new one, contact the customer center.
Overview
| System Overview
7
System Overview
Front
Touch display panel
(touch LCD)
Stand
Overview
| System Overview
8
Rear and I/O ports
Stand rear cover
I/O port cover
Cable hole
Power button
Two USB ports
Power (12V DC-IN) jack
Power (12V DC-OUT) jack
COM4 port
COM3 port
Four USB ports
LAN port
Speaker jack
VGA port
COM1 port
COM2 port
Overview
| Adjusting LCD Angle
9
Adjusting LCD Angle
You can tilt the LCD to achieve the optimum viewing angle. The angle can be adjusted within 45
degrees up/down.
Adjust the tilt of the LCD for your convenience.
CAUTION:
⦁
Do not put sharp objects on the surface of the LCD, and never spray cleaner directly onto the display.
⦁
Do not pull the display beyond the maximum tilt angle, and do not apply excessive pressure to the display.
10
Installation
Connecting Peripherals
Removing the I/O port cover
Using your ngers, push and hold the two points marked PUSH on the I/O port cover, then slide the
cover up.
Indice
Altri manuali OKPOS Terminale touch
