Olympus SZ2-STS Manuale utente
INSTRUCTIONS
SZ2-STS/SZ2-STB1
SZ2-STP/SZ2-STB2
SZ2-STB3
Arms Used with Microscopes for
Equipment Mounting
A X 7 2 6 6
This instruction manual is for the Olympus Arms Used with Microscopes for Equipment Mounting. To
ensure the safety, obtain optimum performance and to familiarize yourself fully with the use of this
equipment, we recommend that you study this manual thoroughly before operating the system.
Retain this instruction manual in an easily accessible place near the work desk for future reference.
1
32 mm
15.8 mm
MODULES AND NOMENCLATURE
}All of the modules are provided with the electrostatic discharge (ESD) feature. However, the clamping knobs of the SZ2-
STS/STB2/STB3 are not provided with the ESD feature.
Arm for SZX Stand
SZ2-STS
Equipment mounting hole
Bonder Arm
SZ2-STB1
LSGA attaching position
Clamping knob
Focus
adjustment
knob
LSGA attaching position
x 5 positions
Clamping
screw x 5 positions
Allen wrench
Width across flats 3 mm
Retaining screw
x 3 screws
Equipment mounting shaft
Focus
adjustment
knob
SZ2-STS/STP/STB1/STB2/STB3
2
24.5 mm
Prober Arm
SZ2-STP
Retaining screw
Bonder Arm
SZ2-STB2
Equipment mounting hole
x 3 screws
Allen wrench
Width across flats 2 mm
Equipment mounting
screw hole
x 4 positions
Focus adjustment
knob
Clamping knob
Retaining screw
x 3 screws
Allen wrench
Width across flats 2 mm
Focus
adjustment
knob
3
24.5 mm
Bonder Arm
SZ2-STB3
Clamping screw
LSGA mounting section
x 3 positions
Focus adjustment
knob
Clamping knob
Equipment mounting hole
SZ2-STS/STP/STB1/STB2/STB3
4
Fig. 2
Fig. 1
ASSEMBLY
1Mounting on the Equipment (Figs. 1 to 3)
SZ2-STS, SZ2-STB2 or SZ2-STB3
Loosen the clamping knob @, fit the equipment mounting hole into the
pole ² of the system and tighten the clamping knob @ firmly.
# When mounting the equipment for the SZX, remove the drop-preven-
tion ring from the stand.
# Do not tighten the clamping knob while the pole is not inserted into
the equipment mounting hole.
SZ2-STB1
1. Loosen the clamping screw on the mount section of the equipment, insert
the equipment mounting shaft ³ into the mount section, and tighten the
clamping screw.
2. The equipment mounting shaft can be inserted from either up or down.
When it is required to attach a heavy object such as a photography unit, it
is recommended to insert the equipment mounting shaft from the upward
direction.
3. To adjust the angle of the optical axis of microscope, loosen the retaining
screws | using the provided Allen wrench, adjust the angle, and then
tighten the two retaining screws that can be tightened.
SZ2-STS or
SZ2-STB2 ²
@
³
SZ2-STB1 |
5
Fig. 3
SZ2-STP
Fix the equipment mounting focusing arm firmly by inserting and tighten-
ing three or more hex-socket screws 5.
# Mount so that the optical axis of the microscope and surface of the
specimen are not tilted.
SZ2-STP
5
SZ2-STS/STP/STB1/STB2/STB3
6
Fig. 5
Fig. 4
2Attaching the Microscope Frame (Figs. 4 & 5)
SZ2-STS, SZ2-STB1 or SZ2-STB3
1. Loosen the clamping screw @ and insert the microscope frame. The clamp-
ing screw can be attached to any of the three positions around the arm.
2. Tighten the clamping screw @ firmly.
SZ2-STP or SZ2-STB2
1. Using the provided Allen wrench, fully loosen the three retaining screws
(hex-socket screws) ² around the arm and insert the microscope.
2. Tighten the three retaining screws firmly.
# When an SD or SF series microscope frame is attached on the SZ2-
STP or SZ2-STB2, the ring fluorescent lamp cannot be used.
@
²
7
Fig. 6
3Attaching the LSGA Illuminator (Fig. 6)
# The LSGA cannot be attached ton the SZ2-STB2 and SZ2-STP.
Using the IHA or IHD holder, the LSGA illuminator can be attached to any
of the five (or three with the SZ2-STB3 in combination with the IHA mount-
ing holder) LSGA attaching positions @ on the arm.
For details, refer to the instruction manual for the LSGA.
Fig. 7
4Adjusting the Focus Adjustment Knob Tension (Fig. 7)
1. Hold the left and right focus adjustment knobs @ with two hands, fix one
knob and rotate the other knob to increase or decrease the tension ac-
cording to the rotation direction.
2. This operation is intended to adjust the force required for rotating the knob
while preventing spontaneous lowering of the microscope frame. To ob-
tain highest ease of use, it is recommended to adjust the tension at a
slightly higher level than the level at which spontaneous lowering occurs.
@
To decrease
Fix this
knob.
@
To increase
SZ2-STS/STP/STB1/STB2/STB3
8
SPECIFICATIONS
Item Specifications
Model SZ2-STS SZ2-STB1
Microscope attaching method Insertion (attaching hole diameter 76 mm). Attaching using a clamping knob.
Focus adjustment
Ball guide system, up/down movement with rack & pinion.
Focus adjustment stroke 50 mm
Focus adjustment knob tension adjustable.
Illuminator (LSGA) attaching method Possible using an LSGA attaching holder (IHA or IHD).
Mounting on the equipment Insertion (attaching hole diameter
32H8 mm).
Mounting using a clamping knob.
Load up to 7 kg.
Insertion (attaching shaft diameter
15.8 f8 mm).
Microscope attaching angle adjustable.
Load up to 7 kg.
Weight Approx. 1200 grams Approx. 900 grams
Model SZ2-STB2 SZ2-STP
Microscope attaching method Insertion (attaching hole diameter 76 mm).
Clamping using three hex-socket retaining screws (using the provided Allen wrench)
Focus adjustment Ball guide system, up/down movement with rack & pinion.
Focus adjustment stroke 45 mm
Focus adjustment knob tension adjustable.
Mounting on the equipment
Insertion (attaching hole diameter
24.5 mm).
Mounting using a clamping knob.
Load up to 7 kg.
Attaching using three or more hex-socket
screws (M4x10).
(Four mounting holes)
Load up to 7 kg.
Weight Approx. 800 grams Approx. 500 grams
+0.2
0
+0.039
0 --0.016
--0.043
+0.2
0
+0.06
+0.01
9
Item Specifications
Model SZ2-STB3
Microscope attaching method Insertion (attaching hole diameter 76 mm). Attaching using a clamping knob.
Focus adjustment Up/down movement with rack & pinion and dovetail guide.
Focus adjustment stroke 43 mm.
Focus adjustment knob tension adjustable.
Illuminator (LSGA) attaching method Possible using an LSGA attaching holder (IHA).
Mounting on the equipment Insertion (attaching hole diameter 24.5 mm).
Mounting using a clamping knob.
Load up to 3 kg.
Weight Approx. 600 grams
+0.2
0
+0.06
+0.01
Questo manuale è adatto per i seguenti modelli
4
Indice
Altri manuali Olympus Attrezzature da laboratorio
Olympus
Olympus U-SRG Manuale utente
Olympus
Olympus SZX2 Series Manuale utente
Olympus
Olympus OLYMPUS OSF-3 Manuale utente
Olympus
Olympus BioLever mini Manuale utente
Olympus
Olympus SZX-SDO2 Manuale utente
Olympus
Olympus U-UCD8 Manuale utente
Olympus
Olympus AL120-12 Series Manuale utente
Olympus
Olympus BH-NRE Manuale utente
Olympus
Olympus U-DO3 Manuale utente
Olympus
Olympus U-AFA2M-VIS Manuale utente
Olympus
Olympus OER-Elite Manuale utente
Olympus
Olympus U-UCD8A Manuale utente
Olympus
Olympus AL120-6Series Manuale utente
Olympus
Olympus SZX-RFL2 Manuale utente
Olympus
Olympus SZX-RFL3 Manuale utente
Olympus
Olympus CKX-CCSW Manuale utente
Olympus
Olympus SZX2-EEPA Manuale utente
Olympus
Olympus VISERA CLV-S40 Manuale utente
Olympus
Olympus U-LH50HG Manuale utente
Olympus
Olympus SZX2-ILR66 Manuale utente
Manuali Attrezzature da laboratorio popolari di altre marche
Agilent Technologies
Agilent Technologies 5800 ICP-OES Manuale utente
Endress+Hauser
Endress+Hauser Cleanfit CPA875 Manuale utente
NI
NI PXI-5422 Manuale
Collomix
Collomix Aqix Manuale utente
SPEX SamplePrep
SPEX SamplePrep 6875 Freezer/Mill Series Manuale utente
Ocean Insight
Ocean Insight FLAME-NIR+ Manuale utente
