Omega OBO61PX Manuale utente
1
Instruction Manual
OMEGA OVEN
OBO61PX
Thank you for purchasing an Omega appliance
Tailored for the modern aesthetic and lifestyle of busy people, your new Omega Appliance will make a
welcome addition to the family.
Omega caters to style-savvy customers who look for balance between stunning form and clever function.
This means a combination of sleek, chic, sophisticated design yet effortless functionality.
And we source from the best. The best craftsmanship. The best innovation. From the best international
design-houses.
All brought together under an appliance that stands for design-led balance.
Please take the time to read through the following instruction manual to familiarise yourself with the
installation, operation requirements and maintenance to ensure optimum performance.
Further Information
For important information about your Omega Appliance such as warranty registration, manuals, features,
and specifications please visit omegaappliances.co.nz (if you are in New Zealand) or contact our Customer
Care team on the below email or phone numbers.
Contact Us
Our customer service team is here to help you with any questions or concern.
They are on call Monday to Friday 8.30am to 5.00pm and of course you can always send a email at your
convenience.
Email: customercare@monacocorp.co.nz
Phone: 09 415 6000
READ THE INSTRUCTION BOOKLET BEFORE INSTALLING AND USING THE
AP
P
LIAN
CE.
It is important that you retain these instructions, proof of purchase as well as other important
documents about this product for future reference.
The manufacturer will not be responsible for any damage to property or to persons caused by
incorrect installation or improper use of the appliance.
Due to continual product development, Omega reserves the right to alter specifications and appearances
without notice.
Contents
Important Safety Warnings ............................................................................................................................................... 1
Appliance Details............................................................................................................................................................... 2
Eleccal Connecon.......................................................................................................................................................... 2
Installaon Instrucons…………………………………………………………………………………………………………………………………………… 3-5
Operang Instrucons……………………………………………………………………………………………………………………………………………6-12
Accessories……………………………………………………………………………………………………………………………………………………….….13-14
Cleaning and Maintenance.........................................................................................................................................15-17
Troubleshoong .............................................................................................................................................................. 18
Transport ......................................................................................................................................................................... 18
New Zealand Product Warranty Statements of Standard Warranty Condions............................................................. 19
Disposal Information
•Most of the packaging materials are recyclable. Please dispose of these materials through your local recycling
depot or by placing them into appropriate collection containers.
•If you wish to discard this product, please contact your local authorities and ask for the correct method of
disposal.
1
Important Safety Warnings
IMPORTANT: Read the assembly instruction section and safety precautions of this booklet carefully before removing the
contents of this carton.
1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction
concerning the use of the appliance by a person responsible for their safety. Children should be supervised to
ensure that they do not play with the appliance.
2. In certain circumstances electrical appliances may be a danger hazard.
3. Do not place heavy objects in or on these appliances, or use for storage, or let children play or swing from the
door. These appliances are designed for cooking food only.
4. This appliance is designed for domestic household use only and for the cooking of domestic food products. Use
as a commercial appliance will void the warranty. It should not to be used in a marine environment or outdoors.
5. This appliance is supplied with a 10-amp plug.
6. If the electrical supply cord is damaged, either when being installed or after installation, it must be replaced by
the manufacturer, its service centre or similarly qualified persons in order to prevent a hazard.
7. The electrical connection must be accessible after installation. The appliance must be electrically isolated
before any maintenance can be performed, which includes changing a lamp.
8. Electrical connection must be made as per local wiring rules and regulations. Do not disconnect the appliance
with wet hands or bare feet, and do not disconnect the power cord with extreme force.
9. Always grasp the oven door in the centre of the handle as the areas around the door edges may be hot due to
the escape of hot air.
10. Ensure that the kitchen is well ventilated or mechanical ventilation is in use while cooking in this appliance.
11. Do not store or use flammable materials or aerosols near the oven. Items made from aluminium, plastic or
plastic film should also be kept away from the appliance, as they may fuse to the surface.
12. Never line the oven bottom with aluminium foil, as the consequent accumulation of heat could compromise the
cooking and even damage the enamel.
13. WARNING - The oven will become hot during and directly after use. Do not touch any components during this
time, as they may be hot and can cause burns. Do not touch the heating elements inside the oven to avoid
burns. Children should be kept away. Use heat resistant cooking gloves where-ever possible when moving food
and cooking utensils in and out of the oven.
14. Cleaning may only be commenced on the appliance once it has cooled down (best slightly warm). The
appliance should be disconnected from the power outlet or turned off at your isolation switch before
commencing any cleaning process. Do not use a steam jet or any other high-pressure cleaning equipment to
clean the appliance. Follow oven cleaner directions if these are being used.
15. Wash all accessories in hot soapy water or in a dishwasher, wipe dry with a paper or cloth towel. If you use your
oven for an extended period of time, condensation may form. Dry it using a soft dry cloth.
16. When the appliance is not being used, the knobs must be kept in the ‘OFF’ position.
17. Where this appliance is installed in a caravan, it shall NOT be used as a space heater.
18. Do not modify this appliance.
19. Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass as it can scratch the
surface, which may result in the glass shattering. Clean the glass door using warm damp cloth and dry it with a
soft cloth.
20. All cabinetry and materials used in the installation must be able to withstand a minimum temperature of 50°C
above the ambient temperature of the room it is located in, whilst in use. Certain types of vinyl or laminate
kitchen furniture are particularly prone to heat damage or discolouration at temperatures outside the guidelines
given above. Any damage caused by the appliance being installed without adhering to the temperature limits set
out above will be the liability of the owner.
21. This appliance must be correctly installed by a suitably qualified person, strictly in accordance with the
manufacturer’s instructions. Please see the specific section of this booklet that refers to installation.
22. The appliance must be installed and put in operation by an authorised technician under the conditions provided
by the manufacturer in this manual. The manufacturer cannot be held responsible for any damage that might
occur due to faulty installation.
23. The values indicated on the printed documents found on the product are values obtained in laboratory
environment according to relevant standards. These values may vary according to the usage and environment
conditions of product.
2
Appliance Details
Electrical Details
Model
OBO61PX
Voltage Rating
220 – 240 V ~50 Hz
Power Rating
2400 – 2800 W
This information can be found on the rating plate (data label) affixed to the inside of the door jamb.
Electical Connection
LOCAL AUTHORITY REQUIREMENTS
Installation is only permitted by a licensed electrician and carried out according to instructions
provided by the manufacturer. Incorrect installation might cause harm and damage which the
manufacturer accepts no responsibility.
ELECTRICAL INSTALLATION FOR THE LICENSED ELECTRICIAN
This oven must be connected to a 220-240V 50Hz power supply. It is earthed via the cord and 10A plug.
Before carrying out the connection to the power supply, the voltage rating of the appliance (stamped on the
appliance identification plate) must be checked for correspondence to the available mains supply voltage,
and the mains electric wiring should be suitable for the oven’s power rating (also indicated on the appliance
identification plate);
The switched outlet must be connected to a suitable earth wiring, in conformity to current safety regulations.
This appliance must be plugged into a 10A switched outlet. It should not be located above the appliance
and no more than 1.25m away from it. The power supply cord must not touch against any hot surfaces and
must be placed so that its temperature does not exceed 75°C at any point along its length.
After having installed the appliance, the switched outlet must always be in an accessible position.
NOTE: For connections to the mains power supply, never use adapters, reductions or multiple power points
as these may overheat and catch fire.
The mains terminal block is located on the back of the oven and the terminals are accessible by opening
the terminal block cover. Note: The terminal cover should not be opened when the mains power is still
connected to the appliance and never by an unauthorized person.
The electrical safety of this appliance can only be guaranteed if the oven is correctly and efficiently earthed.
The manufacturer declines all responsibility for damage resulting from an installation which has not been
earthed correctly.
The use of adapters, multiple sockets and/or extensions, is not allowed.
3
Installation Instructions
The adjacent furniture must be able to withstand a minimum temperature rise of 50°C above
the ambient temperature of the room it is located in, during periods of use. The power supply
to the appliance must be cut off before any adjustments or maintenance work is done on it.
Preparation for Installation and Use
WARNING: This appliance must be installed by an authorised service person or qualified technician,
according to the instructions in this guide and in compliance with the current local regulations.
•Incorrect installation may cause harm and damage, for which the manufacturer accepts no
responsibility, and the warranty will not be valid.
•Prior to installation, ensure that the local distribution conditions (electricity voltage and
frequency) and the adjustments of the appliance are compatible. The adjustment conditions for
this appliance are stated on the label.
•The laws, ordinances, directives and standards in force in the country of use are to be followed
(safety regulations, proper recycling in accordance with the regulations, etc.).
Instructions for the Installer
•Fit the appliance into its surround (beneath a work-top or above another appliance) by inserting
screws into the 2 holes that can be seen in the frame of the oven when the door is open.
•The rear panel of the cabinet must be removed so that air can circulate freely. The panel to
which the oven is fitted should have a gap of at least 70 mm at the rear.
•For a built-in oven to work well the cabinet must be of the right type.
•The panels of the adjoining furniture should be heat resistant. Particularly when the adjoining
furniture is made of veneered wood, the adhesives should be able to withstand a temperature of
120℃. Plastic materials or adhesive which cannot withstand this temperature will become
deformed or unstuck.
•To comply with safety regulations once the appliance has been fitted it should not be possible to
make contact with the electrical parts.
•All parts which offer protection should be fixed in such a way that they cannot be removed
without the use of a tool.
•Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of
electric shock.
4
Installation Instructions
•Check that the power rating of the mains supply and of the sockets are suitable for the maximum
power of the appliance as indicated on the specification plate.
•Plug should be accessible after installation. Fit the plug into a socket fitted with a third contact which
corresponds with the earth connection. This should be properly connected.
•If the appliance just fitted with supply leads but does not come already fitted with a plug, then
permanently connect to fixed wiring as follow:
1- The “yellow/green” earth wire, which must be connected to terminal, has to be about 10mm
longer than the other wires; the “blue” neutral wire has to be connected to the terminal marked
with letter N.
2- “Black, brown, red” live wires have to be connected to terminal L. Mains connection can also be
made by fitting a double pole switch with a minimum gap between the contacts of 3mm,
proportionate to the load and complying with the regulations in force.
•The yellow/green earth wire should not be controlled by the switch.
•The plug or a double pole switch used for mains supply connection should be easy to get at, once
the appliance is in position.
•The electrical safety of the appliance can only be guaranteed when it has been correctly connected
to an efficient earthed power supply, as laid down in the regulations for electrical safety.
•The manufacturer cannot be held responsible for any damage to persons or objects due to lack an
earth connection.
IMPORTANT:
Position the mains supply cable so that it is never subjected to a temperature which is more than 50℃
above ambient temperature.
The appliances are supplied with installation kits and can be installed in a worktop with the appropriate
dimensions. The installation and dimensions for hob and oven are shown in the below figures:
A (mm)
557
Min/Max F (mm)
560/580
B (mm)
550
Min G (mm)
555
C (mm)
595
Min H/I (mm)
600/590
D (mm)
575
Min J/K (mm)
5/10
E (mm)
576
5
Installation Instructions
•After making the electrical connections, insert the oven into the cabinet by pushing it forward. Open
the oven door and insert 2 screws in the holes located on the oven frame. While the product frame
touches the wooden surface of the cabinet, tighten the screws.
6
Operating Instructions
Internal View
1. Control Panel
2. Handle
3. Oven door
4. Grill Element
5. Oven Lamp
6. Wire Grill
7. Shallow Tray
8. Wire Grid for Trays
When you first run your oven, a certain smell will be emanated arising from the insulation materials and the
heater elements. For this reason, before using your oven, run it empty at maximum temperature for 45
minutes. At the same time, you need to properly ventilate the environment in which the oven is installed.
In order to cook in your oven, the oven function and temperature setting controls need to be adjusted and
the oven timer, if available, needs to be programmed. Otherwise, the oven will not operate.
Unplug your appliance when it is not in use.
Protect your appliance from atmospheric effects. Do not leave it under the effects of the sun, rain, snow,
dust etc.
7
Operating Instructions
Controls
OVEN FUNCTION/WARNING LIGHT CONTROL
The oven function/warning light control button is used to select the different functions. Each is explained in
detail. To select a function, turn the control knob to the desired oven function and then set the temperature
with the thermostat control.
OVEN THERMOSTAT CONTROL
The oven thermostat control is used to select the desired temperature for cooking. When the temperature
inside your oven reaches the value set, the thermostat will cut the circuit and the thermostat light will go off.
When the temperature falls below the set value, the thermostat will again be turned on alongside the
thermostat light. It is normal for this to occur during the cooking process, particularly when the door has
been opened.
Function Selector
Thermostat Control
Function Control Knob
Digital Timer
Thermostat Control
Knob
Altri manuali per OBO61PX
1
Indice
Altri manuali Omega Forno
Omega
Omega OO6AX Manuale utente
Omega
Omega OO884XA Manuale utente
Omega
Omega OBO691GG Manuale utente
Omega
Omega OO651WA Manuale utente
Omega
Omega OF995FXCOM Manuale utente
Omega
Omega OBO654GG Manuale utente
Omega
Omega OO671XA Manuale utente
Omega
Omega OO6A2X Manuale utente
Omega
Omega OO652XB Manuale utente
Omega
Omega ODO684X Manuale utente
Omega
Omega OBO960XTGG Manuale utente
Omega
Omega OO654X Manuale utente
Omega
Omega OO971XA Manuale utente
Omega
Omega OO651XB Manuale utente
Omega
Omega OO651XR Manuale utente
Omega
Omega OO674XA Manuale utente
Omega
Omega OO640X Manuale utente
Omega
Omega OBO888B Manuale utente
Omega
Omega OO655X Manuale utente
Omega
Omega OO65SXR Manuale utente
