Omicron CMC 353 Manuale utente

CMC 353

Reference Manual

Test Set CMC 353

Article Number: VESD 2004 - Manual Version: CMC353.AE.2 - Year: 2010

This manual is a publication of OMICRON electronics GmbH.

All rights including translation reserved. Reproduction of any kind, e.g., photocopying, microfilming, optical

character recognition and/or storage in electronic data processing systems, requires the explicit consent of

OMICRON electronics.

Reprinting, wholly or in part, is not permitted. The product information, specifications, and technical data

embodied in this manual represent the technical status at the time of writing and are subject to change without

prior notice.

We have done our best to ensure that the information given in this manual is useful, accurate and entirely

reliable. However, OMICRON electronics does not assume responsibility for any inaccuracies which may be

present.

The user is responsible for every application that makes use of an OMICRON product.

OMICRON electronics translates this manual from the source language English into a number of other

languages. Any translation of this manual is done for local requirements, and in the event of a dispute between

the English and a non-English version, the English version of this manual shall govern.

Table of Contents

TABLE OF CONTENTS

Preface...................................................................................................................... 7

Safety Instructions .................................................................................................. 8

1 Designated Use ............................................................................................ 11

2 Introduction .................................................................................................. 12

3 Operating the CMC 353 ............................................................................... 12

3.1 System Components ..................................................................................................... 12

3.2 Safe Use of the Connecting Cables .............................................................................. 13

3.2.1 Test Lead Adapter for Non-Safety Sockets ....................................................... 13

3.3 Regular Test Leads for Safety Sockets ......................................................................... 14

3.3.1 Terminal adapters.............................................................................................. 14

3.3.2 M4 (0.15") Cable Lug Adapters ......................................................................... 15

3.3.3 M5 (0.20") Cable Lug Adapters ......................................................................... 15

3.4 Starting the Test System ................................................................................................ 16

4 Setup and Function ..................................................................................... 19

4.1 Block Diagram ............................................................................................................... 20

4.1.1 Voltage Output (Voltage Amplifier) .................................................................... 21

4.1.2 Current Output (Current Amplifier)..................................................................... 22

4.1.3 Binary Inputs 1 - 10............................................................................................ 23

4.1.4 Binary Output..................................................................................................... 23

4.1.5 AUX DC (DC Power for Test Objects) ............................................................... 24

4.1.6 CPU ................................................................................................................... 25

4.1.7 Power Supplies (DC-DC)................................................................................... 25

4.2 Signal Generation.......................................................................................................... 25

4.2.1 Accuracy and Signal Quality.............................................................................. 26

5 Connections and Interfaces ........................................................................ 27

5.1 Front Panel Connections ............................................................................................... 27

5.1.1 Generator Combination Socket for VOLTAGE OUTPUT and CURRENT

OUTPUT ............................................................................................................ 30

CMC 353 Reference Manual

5.2 Connections on the Back Panel .................................................................................... 32

5.2.1 Ethernet Ports ETH1 and ETH2 ........................................................................ 32

5.2.2 Ethernet / Network Settings ............................................................................... 34

5.2.3 SELV Interfaces................................................................................................. 36

5.2.3.1 External Interface ("ext. Interf.") ......................................................... 36

5.2.3.2 LL out 1-6 (Low Level Outputs 1-6) .................................................... 36

6 Technical Data .............................................................................................. 39

6.1 Main Power Supply........................................................................................................ 39

6.2 Insulation Coordination.................................................................................................. 40

6.3 Outputs .......................................................................................................................... 41

6.3.1 Extended Frequency Range .............................................................................. 42

6.3.2 Current Outputs ................................................................................................. 43

6.3.3 Voltage Outputs ................................................................................................. 48

6.3.3.1 Power Diagram for Three-Phase Operation ....................................... 49

6.3.3.2 Power Diagram for Single-Phase Operation ...................................... 50

6.3.4 Operational Limits in Conjunction with Mains Supply ........................................ 51

6.3.5 Operational Limits with Current and Voltage Amplifier in Parallel ..................... 51

6.3.6 Low Level Outputs "LL out" for External Amplifiers ........................................... 52

6.3.7 Low-Level Binary Outputs ("ext. Interf.")............................................................ 54

6.3.8 Binary Output Relays......................................................................................... 56

6.3.9 DC Supply (AUX DC)......................................................................................... 57

6.4 Inputs.............................................................................................................................. 58

6.4.1 Binary Inputs...................................................................................................... 58

6.4.2 Counter Inputs 100 kHz (Low Level) ................................................................. 61

6.5 Technical Data of the Ethernet Ports............................................................................. 62

6.6 Environmental Conditions............................................................................................... 63

6.6.1 Climate............................................................................................................... 63

6.6.2 Shock and Vibration........................................................................................... 63

6.7 Mechanical Data............................................................................................................ 63

6.8 Cleaning ........................................................................................................................ 63

6.9 Safety Standards, Electromagnetic Compatibility (EMC) and Certificates ..................... 64

Table of Contents

7 Increasing the Output Power, Operating Modes ....................................... 65

7.1 Safety Instructions for High Current Output................................................................... 65

7.2 Single-Phase Operation of the CMC 353 ...................................................................... 66

7.2.1 1 x 32 A High Burden Mode (L-L) ...................................................................... 66

7.2.2 1 x 64 A High Current Mode (LL-LN) ................................................................. 67

7.2.3 Single-Phase Voltage ........................................................................................ 68

7.3 Operation with External Amplifiers ................................................................................. 69

8 Troubleshooting ........................................................................................... 71

8.1 Troubleshooting Guide .................................................................................................. 71

8.2 Potential Errors, Possible Causes, Remedies............................................................... 72

8.3 Overheating .................................................................................................................... 73

9 CMC 353-Related Products and Accessories ........................................... 75

9.1 CMA Current Amplifiers & CMS Voltage Amplifiers ...................................................... 75

9.2 CMControl-3 ................................................................................................................... 76

9.3 Time Synchronization Accessories................................................................................. 77

9.3.1 CMGPS.............................................................................................................. 77

9.3.2 CMIRIG-B .......................................................................................................... 79

9.4 100TX to 100FX-SC Converter ...................................................................................... 81

9.5 Wiring Accessories ......................................................................................................... 82

9.5.1 Standard Delivery Scope ................................................................................... 82

9.5.2 Optional CMC Wiring Accessory Package ........................................................ 83

9.6 Ordering Information....................................................................................................... 86

Appendix ................................................................................................................ 91

Contact Information / Technical Support .............................................................95

Index ....................................................................................................................... 97

CMC 353 Reference Manual

Preface

PREFACE

The purpose of this reference manual is to familiarize users with the

CMC 353 test set and to show how to properly use it in various application

areas.

The manual contains important tips on how to use the CMC 353 safely,

properly, and efficiently. Its purpose is to help you avoid danger, repair costs,

and down time as well as to help maintain the reliability and life of the

CMC 353.

This manual is to be supplemented by existing national safety standards for

accident prevention and environmental protection.

The reference manual should always be available at the site where the

CMC 353 is used. It should be read by all personnel operating the test set.

Note: The OMICRON Test Universe software also installs a PDF version of

this reference manual. It can directly be opened by a mouse-click from the

help topic "User Manuals of OMICRON Test Universe".

In addition to the reference manual and the applicable safety regulations in

the country and at the site of operation, the usual technical procedures for

safe and competent work should be heeded.

Note: This reference manual describes the CMC 353 hardware - that is, the

physical test set. In order to get familiar with the software for controlling and

configuring the CMC 353, please refer to the software manuals and/or the

OMICRON Test Universe Help.

For Your Safety Please Note

The CMC 353 test set can output life-hazardous voltages and currents.

Throughout the manual, this symbol indicates special safety-relevant

notes/directions linked to the possibility of touching live voltages and/or

currents. Please thoroughly read and follow those directions to avoid life-

hazardous situations.

This symbol indicates potential hazards by electrical voltages/currents

caused by, for example, wrong connections, short-circuits, technically

inadequate or faulty equipment or by disregarding the safety notes of the

following sections.

CMC 353 Reference Manual

SAFETY INSTRUCTIONS

Before operating the CMC 353 test set, carefully read the following

safety instructions.

Only operate (or even turn on) the CMC 353 after you have read this

reference manual and fully understood the instructions herein.

The CMC 353 may only be operated by trained personnel. Any

maloperation can result in damage to property or persons.

Rules for Use

•TheCMC 353 should only be used when in a technically sound

condition. Its use should be in accordance with the safety regulations for

the specific job site and application. Always be aware of the dangers of

the high voltages and currents associated with this equipment. Pay

attention to the information provided in the reference manual and the

software documentation.

•TheCMC 353 is exclusively intended for the application areas specified

in section 1, "Designated Use" on page 11. The manufacturer/

distributors are not liable for damage resulting from unintended usage.

The user alone assumes all responsibility and risk.

• The instructions provided in this reference manual and the associated

software manuals are considered part of the rules governing proper

usage.

• Do not open the CMC 353 or remove any of its housing components.

Orderly Practices and Procedures

• The reference manual (or its PDF version) should always be available on

site where the CMC 353 is used.

Note: The OMICRON Test Universe software installs a PDF version of

this reference manual. To view the manual, start the Test Universe Help

from the Start Page or any test module and navigate to the table of

contents entry User Manuals (at the beginning of the table of contents).

Click Hardware Manuals. In this topic you find a direct link to

"CMC 353". To open the manual, click the link.

• Personnel assigned to using the CMC 353 must have read this reference

manual and fully understood the instructions herein.

• Do not carry out any modifications, extensions or adaptations at the

CMC 353.

Safety Instructions

Operator Qualifications

• Testing with the CMC 353 should only be carried out by authorized and

qualified personnel.

• Personnel receiving training, instruction, direction, or education on the

CMC 353 should remain under the constant supervision of an

experienced operator while working with the equipment.

Safe Operation Procedures

• Follow the instructions in sections 3.2 and 3.4 that describe the safe use

of the connecting cables and how to set the CMC 353 into operation.

•TheCMC 353 must only be used from a power outlet that has a

protective earth.

• Do not block the access to safety-relevant test set components like the

main power switch or the power cord. In cases of an emergency, these

components need free and quick access.

• Do not connect any of the front panel VOLTAGE/CURRENT OUTPUTS

1 ... 3 or VOLTAGE OUTPUT 4, respectively, to protective earth. The N

sockets, however, may be connected to protective earth.

• When connecting to the banana plug sockets, only use cables with

4 mm/0.16 " safety banana connectors and plastic housing. Always

insert plugs completely.

• Before connecting and disconnecting test objects, verify that all outputs

have been turned off. Never connect or disconnect a test object while the

outputs are active.

• When disconnecting power supply cables or test leads, always start from

the device feeding the power or signal.

• All sockets on the front panel are to be considered dangerous with

working voltages up to 300 Vrms. Only use cables that meet these

respective requirements to connect to the equipment.

• Red Signal Light :

If the voltage on any of the four voltage outputs or on the "AUX DC"

output exceeds 42 V, the associated signal light lights up.

• Do not insert objects (e.g., screwdrivers, etc.) into the sockets or into the

ventilation slots.

• Do not operate the CMC 353 under wet or moist conditions

(condensation).

• Do not operate the CMC 353 when explosive gas or vapors are present.

CMC 353 Reference Manual

• The SELV interfaces (SELV = Safety Extra Low Voltage) of the

CMC 353 - "Host Interf.", “ETH1”, “ETH2”, "LL out" (Low Level Outputs)

or "ext. Interf." - should only have external devices connected that meet

the requirements for SELV equipment according to EN 60950 or IEC

60950.

• For applications drawing DC current: The load may not exceed 3 mH

because of dangerous feedback current.

• When setting up the CMC 353, make sure that the air slots on the back,

top, and bottom of the test set remain unobstructed.

• Voltages up to 1 kV can be present inside the CMC 353! Therefore,

opening the CMC 353 is only permitted by qualified experts either at the

factory or at certified external repair centers.

•IftheCMC 353 is opened by the customer, all guarantees are

invalidated.

•CMC 353 Ethernet functionality (see section 5.2.1, "Ethernet Ports ETH1

and ETH2" on page 32):

- Connect ETH1 and ETH2 only to Ethernet ports.

•IftheCMC 353 seems to be functioning improperly, please contact the

OMICRON Tecnical Support (see section "Contact Information /

Technical Support" on page 95).

Changing the Power Fuse

• Unplug the power cord between the test set and the power source.

• The fuse is located at the back of the test set.

• Fuse type: T12.5 AH 250 V (wire fuse 5 × 20 mm).

For safety reasons please use only fuse types recommended by the

manufacturer. Refer to 6.1, "Main Power Supply" on page 39 for more

information.

Indice

Altri manuali Omicron Staffetta

Omicron

Omicron CMC 356 Manuale utente

Manuali Staffetta popolari di altre marche

Shelly

Shelly Pro Series Manuale utente

GE MVAX 11 Manuale utente

ABB

ABB RELION REF615R Manuale utente

Pilz

Pilz PNOZ X10 Manuale del proprietario

ABB

ABB SPAJ 142 C Manuale elenco delle parti

Kemo Electronic

Kemo Electronic B197 Manuale utente

Seg

Seg MRM3 Manuale utente

Basler

Basler BE1-700C Manuale utente

CD Automation

CD Automation REVEX 2PH 280A Manuale utente

Ruelco

Ruelco 1S04 Manuale utente

Basler

Basler V3E Z1P B2C1F Manuale utente

Doepke

Doepke Dupline DSM 2 Manuale utente

Siemens

Siemens SIRIUS 3RT1966-4D Manuale utente

GE DGP Manuale utente

Kyongbo Electronics

Kyongbo Electronics GDR-D01 Manuale utente

Siemens

Siemens SIPROTEC 4 Manuale utente

Siemens

Siemens BD2-AK03X/FS Series Manuale utente

Leuze

Leuze MSI-SR5B Manuale utente