Omnicomm Smart Manuale utente
Omnicomm 3.1 Terminals
User Manual
17.07.2020
Smart, Light
Contents
General Information
5
Attention
5
Technical Specifications
6
Installation
8
SIM Card Inserting
8
Wire Colour Designation
10
Power Supply and Ignition Key
12
Terminal
13
Setting Overview
13
Omnicomm Configurator
14
Remote Configuration Server (RCS)
16
Operation Parameters Setting
16
GPRS Connection
16
Connection to Communication Servers for Light
17
Data Collection
19
Data Transmission to a Communication Server
20
Selection of Ignition Source
22
Selection of Speed Source
22
Engine RPM
23
Driving Safety Control
23
Body Tampering Control
28
Internal Battery for Light
28
GPS / GLONASS Signals Jamming Detector for Light
29
GSM Signal Jamming Detector for Light
29
Service Functions
30
Terminal Reboot
30
Setting Password on Configuration Changing
30
Data Collection and Transmission Blocking
32
Remote Configuration Server Operation Setting
32
Terminal SIM Card Number Identification
33
Auxiliary Equipment
33
RS-485 Interface
33
Fuel Level Sensors
34
Omnicomm ICON Display
38
Omnicomm LLD Indicator
39
CAN-LOG controllers for Light
40
Universal Inputs
43
Driver Identification
47
Controlled equipment for Light
48
Geofence Setting for Light
51
Panic button
52
CAN Bus
53
LED and Sound Notification
56
SMS Commands
57
Omnicomm 3.1 Terminals
Smart, Light
General Information
Omnicomm terminals – vehicle equipment designed to gather information on the
vehicle parameters and transmit data to Omnicomm Online or a third-party fleet
monitoring system.
Main functions:
Determination of location, speed and movement direction of the vehicle
Reading and filtering values from fuel level sensors and a wide range of connected
equipment
Remote control of connected auxiliary equipment
Data storage in non-volatile memory
Data transmission to Omnicomm Online and other fleet monitoring systems
Models of Omnicomm terminal differ from each other in the design and range of
connected equipment.
Attention
While carrying out installation, observe the safety rules and regulatory requirements for
this type of work.
5
General Information
Technical Specifications
Omnicomm Smart Omnicomm Light
Communication
Satellite Navigation Systems GLONASS/GPS GLONASS/GPS
Data transmission channel GPRS GPRS
Number of SIM cards 1 1
Power source
Power supply voltage, V 8…30 8…30
Overvoltage protection Yes Yes
Backup battery capacity, mAh - 650
External sensor power supply No No
Data collection and transmission
Data collection period, s 15…240 15…240
Non-volatile memory capacity, events 150 000 150 000
Inputs and outputs
Ignition key input Yes Yes
6
Technical Specifications
RPM sensor input Yes Yes
Number of universal inputs 1 2
Number of digital outputs - 1
Interfaces
CAN interface Yes Yes
RS-485 interface 1 1
USB interface Yes Yes
Built-in accelerometer Yes Yes
Design
Dimensions, mm 67,0 х 67,0 х 22,0 67,0 х 67,0 х 22,0
Working temperature range, C (without the internal
battery)
– 40…+85 – 40…+85
Body tampering sensor Yes Yes
Antenna design Built-in Built-in
Capabilities
Omnicomm Smart Omnicomm Light
Communication
7
Technical Specifications
Fuel level sensors connection 1 2
Remote control through GPRS Yes Yes
Data output via external indicator Yes Yes
SMS notifications Yes Yes
Omnicomm Smart Omnicomm Light
Communication
Installation
SIM Card Inserting
Before SIM card inserting disable PIN request at activation. To this end insert the card in
any cell phone and disable PIN request, according to the cell phone operating
instruction.
1. Push the terminal seal back
2. Insert the SIM card into the connector until it clicks
3. Return the seal to its original position
8
Installation
9
Installation
Wire Colour Designation
Omnicomm Smart terminal
Name of signal Designation Wire colour in cable
Ground (negative) for power supply Ground (power) Black
RPM input Tachometer Yellow
Not used NC Green
Not used NC White
Line B RS-485 B RS-485 Brown
Line A RS-485 A RS-485 Pink
Vehicle power supply voltage Power Red
Ignition key IGN Purple
Universal input 1 Input 1 Blue
Not used NC Grey
CAN Н CAN Н Orange
CAN L CAN L Yellow-green
10
Installation
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Omnicomm Terminale touch
Omnicomm
Omnicomm Smart 3.2 Manuale utente
Omnicomm
Omnicomm Optim 3.0 Manuale utente
Omnicomm
Omnicomm OBDII Manuale utente
Omnicomm
Omnicomm OKO Manuale utente
Omnicomm
Omnicomm Smart 3.0 Manuale utente
Omnicomm
Omnicomm Profi 2.0 Manuale utente
Omnicomm
Omnicomm OKO 3.0 Manuale utente
Omnicomm
Omnicomm Profi Manuale utente
