Omron CX-MOTION-NCF - V1.8 Manuale utente

Cat. No. W436-E1-08

CX-Motion-NCF Ver. 1.8

SYSMAC

CXONE-AL_C-V3/

CXONE-AL_D-V3

OPERATION MANUAL

Cat. No. Z264-E2-04-X Note: Speciﬁcations subject to change without notice.

Authorized Distributor:

Printed in Europe

Cat. No. Z264-E2-04-X Smart Sensor ZFX-C USER´S MANUAL

CXONE-AL@@C-V3/

CXONE-AL@@D-V3

CX-Motion-NCF Ver. 1.8

Operation Manual

Revised October 2008

Notice:

OMRON products are manufactured for use according to proper procedures by a qualified operator

and only for the purposes described in this manual.

The following conventions are used to indicate and classify precautions in this manual. Always heed

the information provided with them. Failure to heed precautions can result in injury to people or dam-

age to property.

!DANGER Indicates an imminently hazardous situation which, if not avoided, will result in death or

serious injury. Additionally, there may be severe property damage.

!WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or

serious injury. Additionally, there may be severe property damage.

!Caution Indicates a potentially hazardous situation which, if not avoided, may result in minor or

moderate injury, or property damage.

OMRON Product References

All OMRON products are capitalized in this manual. The word “Unit” is also capitalized when it refers to

an OMRON product, regardless of whether or not it appears in the proper name of the product.

The abbreviation “Ch,” which appears in some displays and on some OMRON products, often means

“word” and is abbreviated “Wd” in documentation in this sense.

The abbreviation “PLC” means Programmable Controller.

Visual Aids

The following headings appear in the left column of the manual to help you locate different types of

information.

Note Indicates information of particular interest for efficient and convenient opera-

tion of the product.

1,2,3... 1. Indicates lists of one sort or another, such as procedures, checklists, etc.

OMRON, 2004

by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission o

OMRON.

No patent liability is assumed with respect to the use of the information contained herein. Moreover, because OMRON is con-

stantly striving to improve its high-quality products, the information contained in this manual is subject to change without

notice. Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON assumes no responsibility

for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in

this publication.

vii

TABLE OF CONTENTS

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xix

1 Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xx

2 General Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xx

3 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xx

4 Operating Environment Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxi

5 Application Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxi

SECTION 1

CX-Motion-NCF Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1-1 What is CX-Motion-NCF? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1-2 System Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1-3 Function List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1-4 Operation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

SECTION 2

Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2-1 Installing and Uninstalling the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2-2 Connecting to PLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

SECTION 3

Basic Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3-1 Screen Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3-2 Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

3-3 Operations Listed by Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

SECTION 4

Creating Projects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

4-1 Creating a New Project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

4-2 Adding and Deleting Position Control Units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

4-3 Adding and Deleting Servo Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

SECTION 5

Editing Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

5-1 Editing Unit Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

5-2 Editing Servo Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

viii

TABLE OF CONTENTS

SECTION 6

Saving and Reading Projects . . . . . . . . . . . . . . . . . . . . . . . . . 43

6-1 Saving Project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

6-2 Reading Project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

6-3 Import . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

6-4 Export . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

6-5 Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

SECTION 7

Transferring and Comparing Data . . . . . . . . . . . . . . . . . . . . 49

7-1 Initial Setting for Connecting Online . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

7-2 Setting/Changing Communications Specific. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

7-3 Downloading Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

7-4 Uploading Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

7-5 Comparing Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

7-6 Writing to Flash Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

SECTION 8

Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

8-1 Unit Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

8-2 Axis Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

SECTION 9

Test Run Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

9-1 Test Run . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

SECTION 10

Absolute Encoder Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

10-1 Absolute Encoder Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

SECTION 11

Error Log and Troubleshooting . . . . . . . . . . . . . . . . . . . . . . 91

11-1 Error Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

11-2 Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

11-3 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

About this Manual:

This manual describes the installation, and operation of the CX-Motion-NCF software package and

includes the sections described below. The CX-Motion-NCF runs on Windows 2000, XP, and Vista and

is used to set and transfer data used by CS1W-NCF71/CS1W-NC471/CS1W-NC271/CJ1W-NCF71/

CJ1W-NC471/CJ1W-NC271 Position Control Units (also referred to as NC Units), save and print the

Position Control Unit data, and monitor the Position Control Unit’s operating status.

Please read this manual carefully and be sure you understand the information provided before

attempting to install or operate the CX-Motion-NCF. Be sure to read the precautions provided in the fol-

lowing section. Please read the following manuals carefully and be sure you understand the informa-

tion provided before setting up or using an application for a Position Control Unit.

For details on procedures for installing the CX-Motion-NCF from the CX-One FA Integrated Tool Pack-

age, refer to the CX-One Ver. 3.0 Setup Manual provided with CX-One.

Name Contents Cat. No.

(suffixes omitted)

SYSMAC CX-Motion-NCF

Operation Manual

Describes the operating procedures for the CX-Motion-NCF W436 (this manual)

SYSMAC CJ1W-NCF71/

CS1W-NCF71/

Position Control Units

Operation Manual

Describes the basic operation of the Position Control Units. W426

Cat. No. Model Name Contents

W463 CXONE-AL@@C-V3/

CXONE-AL@@D-V3

CX-One Ver. 3.0 Setup

Manual

Installation and overview of CX-One FA Inte-

grated Tool Package.

Precautions provide general precautions for using the CX-Motion-NCF, Programmable Controller, and

related devices.

Section 1 provides an overview of the CX-Motion-NCF, and describes the functions and system con-

figuration required to operate the CX-Motion-NCF.

Section 2 provides information on installing the CX-Motion-NCF and CX-Server, and connecting to the

PLC.

Section 3 describes each of the screens and basic operations.

Section 4 provides information on creating projects and adding/deleting Position Control Units and

Servo Drives.

Section 5 describes the operations used to edit Unit Parameters and Servo Parameters.

Section 6 describes the operations used to save and read newly created projects. Information is also

provided on importing, exporting, and printing procedures.

Section 7 describes the operations used to transfer or compare data between the personal computer

and Position Control Unit/Servo Drive, and to write data transferred to the Position Control Unit to the

Position Control Unit's flash memory.

Section 8 provides information on the Monitor Windows that are used to display the Position Control

Unit's communications status, error status, and axis's present position and status.

Section 9 describes the test run operation for each axis.

Section 10 describes the absolute encoder setup operation.

Section 11 provides information on troubleshooting errors that may occur, meanings of error codes,

and the procedures required to reset errors in the Unit or axes.

!WARNING Failure to read and understand the information provided in this manual may result in per-

sonal injury or death, damage to the product, or product failure. Please read each section

in its entirety and be sure you understand the information provided in the section and

related sections before attempting any of the procedures or operations given.

Read and Understand this Manual

Please read and understand this manual before using the product. Please consult your OMRON

representative if you have any questions or comments.

Warranty and Limitations of Liability

Application Considerations

WARRANTY

(1) The warranty period for the Software is one year from either the date of purchase or the date on which

the Software is delivered to the specified location.

(2) If the User discovers a defect in the Software (i.e., substantial non-conformity with the manual), and

returns it to OMRON within the above warranty period, OMRON will replace the Software without charge

by offering media or downloading services from the Internet. And if the User discovers a defect in the

media which is attributable to OMRON and returns the Software to OMRON within the above warranty

period, OMRON will replace the defective media without charge. If OMRON is unable to replace the

defective media or correct the Software, the liability of OMRON and the User's remedy shall be limited to

a refund of the license fee paid to OMRON for the Software.

LIMITATIONS OF LIABILITY

(1) THE ABOVE WARRANTY SHALL CONSTITUTE THE USER'S SOLE AND EXCLUSIVE REMEDIES

AGAINST OMRON AND THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED,

INCLUDING BUT NOT LIMITED TO, WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE. IN NO EVENT WILL OMRON BE LIABLE FOR ANY LOST PROFITS OR

OTHER INDIRECT, INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF

USE OF THE SOFTWARE.

(2) OMRON SHALL ASSUME NO LIABILITY FOR DEFECTS IN THE SOFTWARE BASED ON

MODIFICATION OR ALTERATION OF THE SOFTWARE BY THE USER OR ANY THIRD PARTY.

(3) OMRON SHALL ASSUME NO LIABILITY FOR SOFTWARE DEVELOPED BY THE USER OR ANY

THIRD PARTY BASED ON THE SOFTWARE OR ANY CONSEQUENCE THEREOF.

SUITABILITY FOR USE

THE USER SHALL NOT USE THE SOFTWARE FOR A PURPOSE THAT IS NOT DESCRIBED IN THE

ATTACHED USER MANUAL.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Omron Software

Omron

Omron NT-series Manuale utente

Omron

Omron NT - SUPPORT TOOL FOR WINDOWS V4 Manuale utente

Omron

Omron FB LIBRARY - Guida utente

Omron

Omron CX-PROGRAMMER 5 Manuale utente

Omron

Omron CX-ONE - SETUP 02-2009 Guida utente

Omron

Omron CX-SUPERVISOR 3.1 - NET INTERFACE Manuale utente

Omron

Omron SYSMAC WS02-NSFC1-E Guida utente

Omron

Omron CX-ONE V1.1 - SETUP 11-2005 Guida utente

Omron

Omron CX-ONE V4 Manuale utente

Omron

Omron CX-SUPERVISOR - V2.0 Manuale utente

Omron

Omron CX-ONE Manuale utente

Omron

Omron HEALTH MANAGEMENT - SOFTWARE VERSION 1-3 -... Manuale utente

Omron

Omron CX-ONE - INTRODUCTION GUIDE Manuale di riferimento

Omron

Omron CJ2 - 02-2010 Manuale utente

Omron

Omron CX-PROFIBUS Manuale utente

Omron

Omron NT - SUPPORT TOOL 07-1995 Manuale utente

Omron

Omron CX-PROGRAMMER V9 - REV 12-2009 Manuale utente

Omron

Omron WS02-LCTC1-E - V2.60 REV 12-2003 Manuale utente

Omron

Omron NQ HMI Manuale utente

Omron

Omron WS02-NCTC1-E - 07-2001 Manuale utente

Omron

Omron CJ2 CPU - REV 10-2010 Manuale utente

Omron

Omron FLEXXPECT-PICKING Manuale utente

Omron

Omron NS - Manuale utente

Omron

Omron CX-INTEGRATOR - V2.3 REV 02-2009 Manuale utente

Manuali Software popolari di altre marche

COMPRO

COMPRO COMPROFM Manuale utente

Muratec

Muratec OFFICEBRIDGE ONLINE Manuale utente

Oracle

Oracle Contact Center Anywhere 8.1 Manuale utente

Adobe

Adobe 65007312 - Photoshop Lightroom Manuale

Avaya

Avaya NULL One-X for RIM Blackberry Manuale utente

HP ProLiant BL420c Manuale utente

PS Audio

PS Audio PowerPlay Manuale del proprietario

Brady

Brady LOCKOUT PRO 3.0 Manuale di servizio

Avaya

Avaya Interaction Center Manuale utente

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manuale

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manuale utente

Oracle

Oracle Application 9i Manuale utente

Acer

Acer RDM Manuale utente

Canon

Canon Vixia HF21 Manuale utente

Canon

Canon ZR950 Manuale utente

Samsung

Samsung Auto Backup Manuale utente

Polycom

Polycom Vortex EF2201 Istruzioni per l'installazione e il funzionamento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manuale utente