One Forall Essence 4 Manuale utente
How can I program a missing function on my Essence remote?
To use the Key Magic procedure, please follow the instructions outlined below:
1. Use the MODE key to select the relevant device key.
2. Hold down the MAGIC key until the light blinks once and then twice and stays lid.
3. Enter the code 994, the light blinks twice.
4. Press the Magic key once
5. Enter the code of the required function, see below.
6. Press the One For All key you wish to assign the function to.
7. The light blinks twice and that key should now function.
Please note:
The MODE key, CombiControl key and Magic key cannot be programmed.
The functions listed here might not all be compatible with your specific make and model.
Programming a function that does not exist on the original remote control might cause
malfunction or damage for which One For All cannot be held responsible.
How can I set up a device if I do not have a code?
If you do not have a code for your device, then you can:
Use the "Find your setup code" tool and enter the exact make and model number of your
device.
Use the learning feature of your universal remote control to copy the functions from the
original remote control. To use the learning feature, please refer to the user manual of
your One For All remote control or read the related articles in our online knowledge base.
However we advise you to contact your local support on the following
website:(https://www.oneforall.com/support/universal-remotes).
Scroll down and click on the flag of your country to contact our local support team.
How do I program my code on my Essence remote?
To program the basic code on your Essence remote, please follow the instructions mentioned
below:
1. Hold down MAGIC until the light blinks once and then twice and stays on.
2. Press the MODE key to select the relevant device key.
3. Enter the code, the light will blink twice.
4. You can now operate your device.
If the LED does not blink twice at the end, please try the following
1. Hold down MAGIC until the light blinks once and then twice and stays on.
2. Press the MODE key to select the relevant device key.
3. Enter 992, the light will blink twice.
4. Press the Magic key once, the light blinks once.
5. Press the Magic key again, the light will blink twice.
6. You can now set up the device code.
The Find your Setup Code Tool indicates that the code for my device is not in the memory of my
remote, what do I need to do?
To resolve this problem we can offer you the following two solutions:
1. Learning feature
2. Upgrade service
1. LEARNING FEATURE: Your One For All remote is capable of copying functions straight from the original
remote control that came with your device. To use the learning feature, please refer to the user manual
of your One For All remote control or read the related articles in our online knowledge base.
2. UPGRADE SERVICE: Because of the quick changing technology we can’t always ensure that the latest
codes will be stored in the memory of your One For All remote. Some codes will be created after the
release of the remote or the memory of the remote is limited, so that we choose only the most popular
codes. To ensure a working remote we offer the upgrade service, which is free of charge (for both
upgrade and postage back) within the first year of purchasing your One For All remote, provided you still
have the proof of purchase.
If your remote has been purchased more than 1 year ago, or if you do not have the proof of purchase
anymore, the upgrade service is still possible for an additional fee. If you would like to make use of this
service, then you need to send in your One For All remote control and our technicians will program the
missing code for you. This upgrade process takes a few days and we will send your One For All remote
programmed back to you.
However we advise you to contact your local support on the following
website:(https://www.oneforall.com/support/universal-remotes).
Scroll down and click on the flag of your country to contact our local support team.
Where can I find the right code for my device, to install onto my One For All remote?
If you are looking for your set up code, click here to open our "Find your setup code" tool and enter the
exact make and model number of your device.
You can also refer to the code list in the back of the user manual.
Which code can I use to operate my Apple TV 4?
The Apple TV 4 supports Apple TV remotes from previous generations as well, for which setup code
1115 is created.
Should the Apple TV not respond with the above mentioned code, the TV4 also has the capability to
learn commands from a remote.
This way, you can setup the One For All remote for usage. Please refer to the documentation of your
Apple TV 4 for instructions.
Which device key do I use on my Essence remote for Freeview?
On the Essence, the SAT key should be used for programming the Freeview.
Which device key on the Essence 4 do I use for DVD-Home Cinema?
On the Essence 4, you can use the DVD or AMP key for your DVD-Home Cinema.
After programming the set-up code, please test the volume keys.
Also please check if the 1-0 keys change the inputs and if play and stop work correctly with the DVD-
Home Cinema.
Altri manuali per Essence 4
1
Indice
Altri manuali One Forall Telecomando
One Forall
One Forall URC-6131 Manuale utente
One Forall
One Forall URC-9900 Manuale di istruzioni
One Forall
One Forall KAMELEON 4 Manuale utente
One Forall
One Forall 6-DEVICE PVR Manuale utente
One Forall
One Forall Essence 4 Manuale utente
One Forall
One Forall URC-1050 Manuale utente
One Forall
One Forall URC1212 Manuale utente
One Forall
One Forall ONE FOR ALL 4080CODES Manuale utente
One Forall
One Forall URC-3435 Manuale utente
One Forall
One Forall URC1030 Manuale elenco delle parti
One Forall
One Forall URC1281 Manuale utente
One Forall
One Forall URC 7980 Manuale utente
One Forall
One Forall SimpleSet URC-7960 Manuale utente
One Forall
One Forall ONE FOR ALL PVR 6 Manuale utente
One Forall
One Forall URC-4021 Manuale utente
One Forall
One Forall KAMELEON 4 Manuale utente
One Forall
One Forall URC-3910 Manuale utente
One Forall
One Forall URC-4911 Manuale utente
One Forall
One Forall URC-1669 Manuale utente
One Forall
One Forall SmartControl URC-7960 Manuale utente
