One Forall Zapper URC-6512 Manuale utente

Universal remote

URC-6512

701594

WWW.ONEFORALL.COM 2

PICTURE OF THE ZAPPER REMOTE

INSTALLING THE BATTERIES

FEATURES AND FUNCTIONS

SETTING UP THE ZAPPER

Direct Set-Up 5

Search Method 7

Code Blink Out 8

SET-UP CODES

Television 59

ADVANCED OPERATION

Controlling Colour & Brightness 9

Scan 9

TROUBLE-SHOOTING

Helpful Hints 10

Thank you for purchasing the ZAPPER universal remote control

(URC-6512). Your ZAPPER package contains:

• The ZAPPER remote control

• The ZAPPER User Guide & Code Book

The User Guide & Code Book explains in simple steps how to set up and

operate your new universal remote control. You may need this guide

again in the future, so please be sure to keep it.

Your ZAPPER needs 2 new “AAA/LRO3” batteries.

Your ZAPPER is designed to let you use one remote to operate your

Television.

About Your ZAPPER

Table of Contents

WWW.ONEFORALL.COM 3

WWW.ONEFORALL.COM 4

Installing The Batteries

The ZAPPER needs 2 new “AAA/LRO3” alkaline batteries.

1Remove the battery cover from the back of the ZAPPER by pres-

sing down on the tab.

2Match the batteries to the +/- marks inside the battery case, then

insert the batteries.

3Press the battery cover back into place.

See picture of the ZAPPER remote on page 3.

1MAGIC

The MAGIC key is used to set up your ZAPPER and to access special

features.

2Power

The POWER key operates the same function it did on your

orginal remote control. The LED (Light Emitting Diode) flashes red

to show the remote is working.

3Mute

The Mute key operates the same function it did on your orginal

remote control. It is also used to activate the Scan feature (see

page 9).

4Volume +/-, Programme +/-

The Volume and Programme keys operate just as those on your

original remote control. These keys are also used to program the

ZAPPER for your devices and to control the Colour and Brightness

settings of your television (see page 9).

Important notes:

- In order to avoid having to reprogram your ZAPPER after you remove

the batteries, you will need to insert new batteries within 5 minutes.

Also, it is best that you do not use rechargeable batteries.

- On the inside of the battery compartment door you will find a

label on which to write your set-up code after your ZAPPER is set

up for your television. Please write down your code for easy,

future reference.

Features and Functions

WWW.ONEFORALL.COM 5

Direct Set-Up

To set up the ZAPPER for your Television follow the instructions below. To

set up your Television:

1Find your Television code in the Set-Up Code section

(page 59-68). Codes are listed by brand name. The

most popular codes are listed first.

2Press and hold the MAGIC key until the POWER key

(LED) blinks twice (the POWER key (LED) will blink

once then twice).

3 Enter your 5-digit code according to the chart

below. The POWER key (LED) will blink twice.

4Now, aim the ZAPPER at your Television and press

POWER. If your Television switches off, your ZAPPER

should be ready to operate your device.

5Turn your device back on and try all the remote’s functions

to ensure they are working properly. If the functions do not

work properly, repeat steps 1-5 using another code listed

under your brand.

6 Write the codes for your TV in the boxes provided

on page 6 and inside the battery compartment for

easy future reference.

Setting Up The ZAPPER

ONE FOR ALL

Acura

Admiral

Adyson

Agazi

AGB

Aiko

11132

122241224223313

14232

21131

31121

142311113211322

224141131412131

2233213444

Volume + = 1

Volume

Programme + = 3

Programme

6WWW.ONEFORALL.COM

TV Code

Example: To enter the Sony TV code 24432, you would press Volume(-),

Programme(-), Programme(-), Programme(+), Volume(-).

If your television does not respond to the ZAPPER after you have tried all

the codes listed for your brand, try the Search Method described

on page 7.

Make sure you write your correct 5 digit code in the boxes provi-

ded inside the battery compartment and in the boxes provided on

this page.

Important notes:

- Some codes are quite similar. If your television does not respond or is not

functioning properly with one of the codes, follow steps 1-5 with each

code listed for your brand.

- If none of the codes listed for your brand operate your television, follow

the Search Method described in the next section. The Search Method can

be used even if your brand is not listed at all.

- Write the code for your TV in the boxes provided below and

inside the battery compartment for easy future reference.

■■ ■■ ■■ ■■ ■■

Volume + = 1

Volume

= 2

Programme

= 4

Programme + = 3

WWW.ONEFORALL.COM 7

Search Method

If your Television does not respond to the ZAPPER after trying all the codes

listed for your brand, try searching for your code. To search for your TV code:

1Turn on your TV and aim your ONE FOR ALL at your

television.

2Press and hold the MAGIC key until the POWER key

(LED) blinks twice (the POWER key (LED) will blink once

then twice).

3Next, press the Programme(-) key three times.

4Next, alternate between Programme(-) and POWER until

your Television turns off. You may have to press these keys

many times, so be patient. Remember, you must aim the

ZAPPER at your device the entire time you are searching

for your code.

5When your device turns off, press and release MAGIC.

Don’t forget, press MAGIC as soon as your device turns off.

The ZAPPER should now be ready to operate your Television. Turn your

device back on and try all the remote’s functions to ensure they are

working properly. If some of the ZAPPER’S commands are not operating

correctly, try the search method again, you may be using the wrong code.

Important notes: During step 4, you may have to press these keys many

times (up to 150!), so be patient. Remember, you must aim the ZAPPER at

your device the entire time you are searching for your code.

8WWW.ONEFORALL.COM

Code Blink Out

After you have used the Search Method, you can find out which code

the ZAPPER responded to by blinking back the code. It’s handy to know

your Television code for future reference. Remember, you can only

blink back your code after the ZAPPER is operating your device.

To blink out your TV code:

1Press and hold the MAGIC key until the POWER key

(LED) blinks twice (the POWER key (LED) will blink once

then twice).

2Next, press Programme(-), Programme(-),

Programme(+).

3For the first digit of your 5-digit code, press Volume + ( )

and count the red blinks.

4For the second digit, press Volume - ( ) and count the

red blinks.

5For the third digit, press Programme(+) and count the

red blinks.

6For the fourth digit, press Programme(-) and count the

red blinks.

7For the fifth digit, press MUTE and count the red blinks.

Write the codes for your TV in the boxes provided on page 6 and inside the

battery compartment for easy future reference.

WWW.ONEFORALL.COM 9

Controlling Colour & Brightness

Depending on the functions of your original remote control, the ZAPPER

can operate the colour and brightness settings of your Television.

Scan

Your ZAPPER comes with a special Scan function which lets you “scan”

through every programme available on your TV.

To scan the programmes on your TV:

1Aim the ZAPPER at your TV. Press and release MAGIC

then press the MUTE key.

The ZAPPER will send the command to advance

through all the programmes available on your

Television stopping at each programme for about three

seconds. Remember, you must aim the ZAPPER at your

device the entire time you are using scan.

2When you find a programme you would like to watch,

simply press any key to stop the Scan feature.

Advanced Operation

then holdPressColour up =

then holdPressColour down =

then holdPressBrightness up =

then holdPressBrightness down =

Note: You have 5 seconds to press the Volume or Channel keys for colour or

brightness adjustment after pressing MAGIC.

Important notes: Scan may not function with a television that did not have

a programme +/- key on the original remote.

10 WWW.ONEFORALL.COM

Trouble-Shooting

Helpful Hints

Solution:

Try the search method.

A) Try all the codes listed for your

brand.

B) Try the search method.

You may be using the wrong code.

Try Direct Set-Up again trying each

code listed under your brand or

start the search method over again

to locate the proper code.

Press MAGIC until the light blinks

twice.

Then press:

(Programme-)

(Programme+)

(Programme-)

If your original remote did not

have channel +/- keys, the ZAPPER

may not operate this function.

Make sure you are using new

batteries and are aiming the ONE

FOR ALL at your device.

Replace batteries with 2 new

“AAA/LR03” alkaline batteries

Problem:

Your brand is not listed in

the ONE FOR ALL code section?

The ONE FOR ALL does not

operate your television?

The ONE FOR ALL is not

performing commands

properly?

Your TV switches to

programme 1 when you

press the power key before

switching off OR you must

press Power twice to switch

on your TV?

You cannot reach channel 10

and above on your TV.

The ONE FOR ALL does not

respond after pressing a

key?

POWER key (LED) does not

blink when you press a key?

Indice

Altri manuali One Forall Telecomando universale

One Forall

One Forall URC-4914 Manuale utente

One Forall

One Forall Kameleon URC-9964B00 Manuale utente

One Forall

One Forall URC-7560 Manuale utente

One Forall

One Forall Univeral Remote Manuale utente

One Forall

One Forall URC-7940 Manuale utente

One Forall

One Forall URC-3300 Manuale utente

One Forall

One Forall 704917 Manuale utente

One Forall

One Forall URC-3300 Manuale utente

One Forall

One Forall URC-3445 Manuale utente

One Forall

One Forall URC-3910 Manuale utente

One Forall

One Forall URC 3050 Manuale utente

One Forall

One Forall Topline Manuale utente

One Forall

One Forall URC-7510 Manuale utente

One Forall

One Forall URC-9966 Manuale utente

One Forall

One Forall 8L Manuale utente

One Forall

One Forall Zapper URC-6510 Manuale utente

One Forall

One Forall URC 7980 Manuale utente

One Forall

One Forall Audio Zapper Manuale utente

One Forall

One Forall URC-8350 Manuale utente

One Forall

One Forall KAMELEON 5 Manuale utente

One Forall

One Forall URC-6210 Manuale utente

One Forall

One Forall SMART CONTROL PRO Manuale utente

One Forall

One Forall URC-7556 Manuale utente

One Forall

One Forall URC-3740 Manuale utente

Manuali Telecomando universale popolari di altre marche

Pronto

Pronto Peel Manuale utente

GE 24929 Manuale utente

Radio Shack

Radio Shack Wireless Remote Control System Manuale utente

AUVIO

AUVIO Universal Home Theater Remote Manuale utente

Philips

Philips Icon SRU4106 Manuale utente

THOMSON

THOMSON ROC4309 Manuale utente

Philips

Philips pm625S Manuale utente

GE RM94931 Manuale utente

RCA

RCA RCU600WMS - Universal Remote Control Manuale utente

Blackweb

Blackweb BWB17AV002 Manuale utente

Marmitek

Marmitek DoorGuard 300 Manuale utente

Chunghop

Chunghop RM-L618 Manuale utente

GE RM24965 Manuale utente

Anderic

Anderic KTN828 Manuale utente

Sunwave Tech.

Sunwave Tech. Touch Screen Remote Control Manuale utente

Medion

Medion E74023 Manuale utente

intensity

intensity RM02A Manuale utente

GE RM24950 Manuale utente