Onn 100006556 Manuale utente

Ver.00 08/12/19

3 Speed

Turntable

PRODUCT GUIDE

100006556

FCC Warnings

Warning: Changes or modiﬁcations to this unit not

expressly approved by the party responsible for

compliance could void the user’s authority to operate

the equipment.

NOTE: This equipment has been tested and found

to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment

o and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect the equipment into an outlet on a

circuit dierent from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV

technician for help.

Customer Service

For any product related questions,

please call us at: 1-888-999-4215.

Inc.) All other trademarks appearing herein are the

property of their respective owners. Speciﬁcations are

subject to change without notice.

Important Safety Instructions

• Read these Instructions.

• Keep these Instructions.

• Heed all Warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with a dry cloth.

• Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including ampliﬁers) that produce heat.

• Do not defeat the safety purpose of the polarized

or grounding - type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are

provided for your safety. When the provided plug

does not ﬁt into your outlet, consult an electrician

for replacement of the obsolete outlet.

• Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

• Only use attachments/accessories speciﬁed by the

manufacturer.

• Unplug this apparatus during lightning storms or

when unused for long periods of time.

• Refer all servicing to qualiﬁed service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

• Use only with a cart, stand, tripod, bracket, or table

speciﬁed by the manufacturer, or sold with

the apparatus. When a cart is used, use

caution when moving the cart/apparatus

combination to avoid injury from tip-over.

Information & Safety Instructions

Additional Warnings and Precautions

• CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH

WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

• Mains plug is used as disconnect device and it

should remain readily operable during intended

use. In order to disconnect the apparatus from

the mains completely, the mains plug should

be disconnected from the mains socket outlet

completely.

• CAUTION: Use of controls or adjustments or

performance of procedures other than those

speciﬁed may result in hazardous radiation

exposure.

• WARNING: Changes or modiﬁcations to this unit

not expressly approved by the party responsible

for compliance could void the user’s authority to

operate the equipment.

• WARNING: Use of this unit near ﬂuorescent lighting

may cause interference regarding use of the

remote. If the unit is displaying erratic behavior

move away from any ﬂuorescent lighting, as it may

be the cause.

• WARNING: Shock hazard - Do Not Open.

• Caution and marking information is located at the

rear or bottom of the apparatus.

• WARNING: To reduce the risk of ﬁre or electric

shock, do not expose this apparatus to rain,

moisture, dripping, or splashing.

• Objects ﬁlled with liquids, such as vases, shall not

be placed on the apparatus.

Warning: To reduce the risk of electric

shock, do not remove cover (or back).

No user-serviceable parts inside. Refer

servicing to qualiﬁed service personnel.

ATTENTION

RISQUE D' ÉLECTROCUTION

NE PAS OUVRIR

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The exclamation point within an

equilateral triangle is intended to

alert the user to the presence of

important operating and maintenance

(servicing) instructions in the literature

accompanying the appliance.

This symbol indicates that this product

incorporates double insulation between

hazardous mains voltage and user

accessible parts.

The lightning ﬂash with arrowhead

symbol, within an equilateral triangle, is

intended to alert the user to the presence

of uninsulated “dangerous voltage” within

the product’s enclosure that may be of

sucient magnitude to constitute a risk of

electric shock to persons.

WARNING : This product can expose

you to chemicals including lead, which

is known to the State of California to

cause cancer and birth defects or other

reproductive harm. For more information

go to www.P65Warnings.ca.gov. This

product meets and complies with all Federal

regulations.

Table of Contents

Get to Know Your Turntable–5

Features–5

What’s in the Box?–5

Top–6

Rear–6

Controls–7

Let’s Get Started–8

Attach the Counterweight–8

Power –9

Loading a Record–9

Connecting to a Bluetooth Speaker–10

Connecting to External Speakers–11

Hints and Tips–12

Anti-Skating–12

Pitch Adjustment–12

Stylus Replacement–12

Usage Tips–12

Features

• Built-in Bluetooth transmitter for

connecting to Bluetooth speakers

• Lift and return action of the tone

arm at the end of a record

• Belt Drive

• Pitch Adjustment

• Anti-Skate Adjustment

• Plays 33, 45, and 78rpm records

• Built-in RIAA preamp

• RCA stereo audio output

• AC power: built-in AC power cable

What’s in the Box?

• Turntable

• 45 rpm adapter

• Phono cartridge

• RCA stereo audio cable 3.9 ft (1.2m)

• Quick Start Guide

• Product Guide

Get to Know Your Turntable

Top

Rear

Get to Know Your Turntable

1. 45rpm Adapter

2. Platter

3. Tone Arm

4. Cartridge & Stylus

5. Tone Arm

Counterweight

6. Anti-Skating

Adjustment

7. Tone Arm Lift Switch

8. Tone Arm Lock

9. Pitch Adjustment

10. Bluetooth Pair Button

11. Power ON/OFF/

Record Speed

12. Power/Bluetooth

Indicator

13. Bluetooth ON/OFF

14. RCA Line Out

15. Phono/Line Out

Setting

Controls

1. Counterweight Adjustment:

Turn to adjust the amount of

weight placed on the record

by the stylus.

2. Anti-Skating Adjustment:

Turn to adjust the inward

tracking of the stylus on the

record.

3. Pitch Adjustment: Turn to ﬁne

tune the speed of the platter

as it spins.

4. Pair Bluetooth: Press to

begin pairing to a Bluetooth

speaker.

5. 78/45/33/OFF: Turn to power

ON the turntable and select

the play speed. The speed

should match the type of

record you are going to play.

6. Power/Bluetooth Pairing

Indicator: Turn to power ON

the turntable, indicated by a

RED LED. When the turntable

is pairing to a Bluetooth

speaker, the light will quickly

ﬂash blue, then turn solid

when successfully paired.

Let’s Get Started

Attach the Counterweight

The counterweight controls how much pressure the stylus will put on a record. If

there is too much pressure, the sound will become distorted. If there is too little

pressure, the stylus will skip out of the grooves on a record.

The tone arm should be balanced without the protective cover over the stylus,

as it will aect the weight. Be careful not to damage the stylus while the cover is

removed.

• Attach the counterweight on the rear of the tone arm and remove the ties

and the tone arm lock securing it in place.

• Adjust the counterweight by turning clockwise or counter-clockwise until the

tone arm ﬂoats naturally.

• Rotate the numbered dial (without rotating the counterweight) so that the

marked “0” is at the top, 12 o’clock position, indicating the neutral balance

setting for future reference.

• Grasping both the counterweight and the dial, rotate counter-clockwise so

that the reading “0.4” is at the top, 12 o’clock position, indicating the tone

arm is set for 4 grams of pressure on the record. This is the recommended

setting for the stylus.

Reading “0.4” is at the top

Loading a Record

• Place your record on the platter, aligning it with the center spindle.

• Set the speed selector dial to match your record type - 33, 45, or 78. If you

are playing a 45rpm record, be sure to place the 45rpm adapter on the

platter ﬁrst, so that it is between the platter and the record.

• Remove the protective cover on the stylus, then release the lock on the tone

arm.

• Use the tone arm lift switch to raise the tone arm upwards, then carefully

move it into position over the record.

• As the tone arm moves into position, the platter will start spinning. Use the

tone arm lift switch to lower the tone arm stylus onto the record. When the

stylus comes into contact with the grooves on the record, the turntable will

send audio to the connected speakers.

Power

Plug the DC power adapter into a

standard wall outlet and the DC

Power Input on the unit.

Lock

Unlock

Connecting to a Bluetooth Speaker

• Start by enabling Pairing Mode on the Bluetooth Speaker you want to

use. Before beginning the pairing process, be sure no other devices are

connected to the speaker.

• On the turntable, turn Bluetooth Mode ON by adjusting the switch on the

back of the unit.

• Press the Pair button on the turntable to begin pairing to your speaker. The

indicator light on the turntable will quickly ﬂash blue while it attempts to

connect to the speaker.

• When successfully paired, the indicator light on the turntable will turn solid.

Note: If the turntable fails to connect, the indicator light will keep ﬂashing

blue. Press the Pair button to try again.

• Audio from the record will now be heard through the connected speakers.

Use the volume control on the speakers to adjust the audio level.

Altri manuali per 100006556

Indice

Altri manuali Onn Giradischi

Onn

Onn 100006556 Manuale utente

Manuali Giradischi popolari di altre marche

Gemini

Gemini CDT-05 MKII Manuale utente

Rotel

Rotel RP-820 Manuale utente

Shuman

Shuman MC-250BT Manuale utente

Stanton

Stanton STR8-150 Manuale utente

Audio Technica

Audio Technica AT-LPW40WN Manuale utente

Crosley

Crosley McQueen CR7011-GY Manuale utente

Reloop

Reloop SMP-1 Manuale utente

auna

auna TT-Classic Plus Manuale utente

COMO AUDIO

COMO AUDIO Turntable Analog Manuale utente

Dual

Dual 1009 F Manuale utente

REED

REED Muse3C Manuale utente

AXIOMTEK

AXIOMTEK OPS883-H Series Manuale utente

Pioneer

Pioneer PL-71 Manuale utente

Vestax

Vestax PDX-a1 Manuale utente

Denon

Denon DP-400 Manuale utente

Dual

Dual 504 Manuale utente

Audio-Techica

Audio-Techica AT-LP60XBT Manuale utente

Goldring

Goldring G99 Manuale utente