ONV POE31016P Manuale utente

USER GUIDE

Intelligent managed PoE Switch

PoE & Optical Transmission

Statement

Packing List

Please kindly check the following items:

1 Intelligent managed PoE switch

1 Power Adapter

2 Mounting Kits

1 User Guide/Conformity Certificate/Warranty Card

Note

If any shortage or damage found, please contact us in time.

This document contains proprietary information that is protected by copyright. No part of this document may be

reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, in any form

or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise without the prior

written permission of Optical Network Video Technologies (Shenzhen) Co., Ltd.

is the registered trademark of Optical Network Video Technologies (Shenzhen) Co., Ltd. The information

and product specifications within this document are subject to change at any time, without notice and without obli-

gation to notify any person of such change.

Product overview

Product Introduction

ONV Intelligent Ethernet Switch fills in that blank between Unmanaged Switch and Full Managed Switch. Intelligent

Ethernet Switch is designed for growing business network who needs to control their network effectively and don’t

want to cost more on full layer 2/3 complicated function. The Ethernet switch which is also built in PoE module provi-

des an affordable solution of power and data over Cat.5 cable. It complied to IEEE802.3af, provide WEB managem-

ent function of Priority and SNMP to achieve the idea deployment of Wilress AP, VoIP and IP based camera. Two

Gigabit TP/SFP combo port can complete the fast connection with server or Gigabit backplane.

24 or 16 10/100Mbps RJ45 port, 2 10/100/1000Mbps TP/SFP Combo port make growing business profits from outstanding perfermance and net-

work extended function. The high perfermance, line-speed structure Ethernet Switch have Max 8.8Gbps switch capacity. All the 26/18 RJ45 Port

support auto- negotiation and Auto-Uplink technology for ensuring the correct network connection.

Note

The product ‘Switch’ mentioned in the manual, if without a special request, it is refering to 10/100M unman-

aged PoE switch, PoE switch in short in below.

Feature

Complied to IEEE802.3af/at, 10Based-T, 100Based-T, 1000Based-T.

Web management function based on Web.

Provide PoE management, VLAN, Link Aggregation,QoS, MAC address binding and other intelligent management function.

Ethernet Port Rate: 24/16 self-adaptive 10/100Mbps and 2 self-adaptive 10/100/1000Mbps.

Support IEEE802.3af PoE (15.4Watts) or IEEE802.3at(30Watts)

PIN assignment: End-span(1/2+,3/6-), Mid-span (4/5+, 7/8-)

Working mode: asynchronization, point to point, full/half duplex self-negotiation.

Ethernet Port Transmission Range: 100meters

Two SFP GBIC Slot used for Fiber connection.

Cable: UTP 5E, Interface: RJ45

19’ standard cabinet, industrial high reliability.

Technical Structure and Port Description

16 Port 10/100M+2 Port 10/100/1000M

Intelligent Ethernet Switch

440 mm

44. 5mm

275mm

440mm

44. 5mm

275mm

OFF

POWER

INPIT:1 00-240 VAC

Freq: 50/60H z

OFF

POWER

INPIT:1 00-240 VAC

Freq: 50/60H z

A: Working LED indicator

B:16 Port PoE

C/D: Gigabit TP/SFP Combo Port

E: Local management port

F:100-240VAC,50/60Hz

A: Working LED indicator

B:24 Port PoE

C/D: Gigabit TP/SFP Combo Port

E: Local management port

F:100-240VAC,50/60Hz

24 Port 10/100M+2 Port 10/100/1000M

Intelligent Ethernet Switch

Indicator description:

Indicator Status Description

OFF

!Note

Remark: Internal Precision Component, for avoiding device damage please handles with case, avoiding violent vibra-

tion. Please contact us or local agency if damage or component loss by shipping, We will solve it ASAP.

Indicator: Support power source, network connection, Fiber port/RJ45 port working status indication, It is convenient

for engineer to parsing problem and monitoring working status.

Power port: Power port connect with PSU, internal power supply intelligent network management PoE switch are wit-

hout PSU, connecting with AC110-245V/50Hz directly.

Ethernet port: Self-Adaption RJ45 port, all port support Auto MDIMDIX, Plug and play. The working status can be est-

imated by indicator on front panel.

SFP Gigabit fiber port: Two combo fiber port, all port support wire-speed forwarding, Rich port configuration. Seaml-

ess connection various network is allowed.

Power Indicator: PWR Yellow LED ON Power ON, Normal Power Supply

Power OFF or Power failure

System Indicator

( SYSTEM)

Yellow LED ON Abnormal System Working Status

Yellow LED Blink In Reading Program, Restore Factory Settings

1,Non-Network Management, 2, Abnormal WEB Program Working Status

Link indicator:

(Link/ACT)

Green LED ON port correctlyConnected

Green LED Blink Receiving or Sending data

OFF Connection failed or Abnormal Link

PoE indicator: POE

Green LED ON Connected standard PD, Normal Power Supply

Green LED Blink Short Circuit or Over Load

OFF No Connection or Connected PD is Non-Standard PD

Detailed descriptions for the product model numbers

www.onvcom.com

Tel:+86-755-33376606 Fax:+86-755-33376608 Email:onv@onv.com.cn

Address: Room 1003, Block D , Tairan building , Chegongmiao, Futian district ,Shenzhen ,China

Factory address:No 5, A building, SenYuTai S&T park, Longhua road, BaoAn district,Shenzhen, China

16-port Series POE switch

POE31016P: 16-port 10/100Mbps +2-port 10/100/1000Mbps up-link ( Combo Ethernet port & SFP slots ) switch , No. 1-16

ports support POE , IEEE802.3af, POE port output : 15.4watts , total power : 270watts

POE31016P-at: 16-port 10/100Mbps +2-port 10/100/1000Mbps up-link ( Combo Ethernet port & SFP slots ) switch , No.

1-16 ports support POE , IEEE802.3at, POE port output : 30watts , total power : 440watts

POE31016PM: 16-port 10/100Mbps +2-port 10/100/1000Mbps up-link ( Combo Ethernet port & SFP slots ) managed swit-

ch , No. 1-16 ports support POE , IEEE802.3af, POE port output : 15.4watts , total power : 270watts

POE31016PM-at: 16-port 10/100Mbps +2-port 10/100/1000Mbps up-link ( Combo Ethernet port & SFP slots ) managed

switch , No. 1-16 ports support POE , IEEE802.3at, POE port output : 30watts , total power : 440watts

24-port Series POE switch

POE31024P: 24-port 10/100Mbps +2-port 10/100/1000Mbps up-link( Combo Ethernet port & SFP slots ) switch , No. 1-24

ports support POE , IEEE802.3af, POE port output : 15.4watts , total power : 440watts

POE31024P-8at: 24-port 10/100Mbps +2-port 10/100/1000Mbps up-link ( Combo Ethernet port & SFP slots ) switch , No.

1-24 ports support POE , No. 1-8 ports support IEEE802.3at, No. 9-24 ports support IEEE802.3af , total power : 440watts

POE31024PM: 24-port 10/100Mbps +2-port 10/100/1000Mbps up-link ( Combo Ethernet port & SFP slots ) managed swit-

ch , No. 1-24 ports support POE , IEEE802.3af, POE port output : 15.4watts , total power : 440watts

POE31024PM-8at: 24-port 10/100Mbps +2-port 10/100/1000Mbps up-link ( Combo Ethernet port & SFP slots ) managed

switch , No. 1-24 ports support POE , No. 1-8 ports support IEEE802.3at, No. 9-24 ports support IEEE802.3af , total power :

440watts

Connection Diagram

Remark :

Via the Web login configuration interface and web page , y ou can set various configuration including exchange m anagement, port Settings and VLAN Settings,

and so on.You can use a web browser (it is recommended to use Internet Explorer 5.0 or above) to operate. All Ethernet ports support web management ,

default management IP: 192.168.2.1, subnet mask :255.255.255.0, default gateway: 192.168.2.254. As long as the PC of the a dministrator can communicate

with this equipment , this equipment can be managed .

Note:

Default login user: admin Default login password: system.

Corresponding user name and password can be modified in” password Settings”. For details, please see network management software applications "user manual"

PoE IP Camera

Cat.5

AC Adapter

PoE C amer a

PoE Switch

POE31024PM

IP Camera

PoE Splitter

PD 3101

DC OUT

Cat.5

PoE IP Camera

Monitor

Cat.5

NVR

Video line

Fiber media

converter

PD-Powered Device

Power over Ethernet Splitter

OFF:12V

ON:5V

PoE RUN

PoE IN

DC OUT

DC RUN

Ethernet out

OUT

Installation guide

Connect to RJ45 port

1.Connect one end of RJ45 wire to switch, the other end to other equipment, as

shown as the figure on the right;

2.After power on, please check the LED indictor status. If it is on, it shows the

link is OK, otherwise, the link is down. Then please check the link and make

sure the other equipment is turned on, refer to the instruction on above page

for details.

Rj45 port

Plug

Connect to SFP port

Smart managed PoE switch has 2 independent SFP ports. Please refer to the following steps for optical module installation.

1.Grasp SFP module and insert it in switch SFP slot smoothly till they keep close contact;

2.Insert one end of the fiber to the Rx and Tx accordingly, and the other end to other equipment, shown as in the right figure;

3.After power on, please check the LED indictor status. If it is on, it shows the link is OK,

otherwise, the link is down. Then please check the link and make sure the other

equipment is turned on.

SFP Port

Fiber module

Optical Fiber

Connect to power

Smart managed PoE switch adopts AC 100-240V, 50/60Hz.

1.Please check the power supply specification matches with the required;

2.Connect switch power wire to AC power socket, shown as in the following figure.

Power Supply Connection Figure Mounting Kits Installation Figure Rack Installation Figure

L Angle Iron

Screw

After installation, please check:

If there is enough space for heat sink; if the power socket is suitable for switch specification; if the power, switch and rack are

properly grounded and if the connection between switch and other network equipments are normal.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali ONV Interruttore

ONV

ONV ONV-IPS31008PF Manuale utente

ONV

ONV POE33064P Manuale utente

ONV

ONV POE31004P Manuale utente

ONV

ONV ONV-POE33026PFM Manuale utente

ONV

ONV IPS31108PF Manuale utente

ONV

ONV IPS31064P Manuale utente

ONV

ONV ONV-POE33016PF Manuale utente

ONV

ONV PD3401 Manuale utente

ONV

ONV ONV-IPS33148PFM Series Manuale utente

ONV

ONV ONV-POE33108PFM Manuale utente

ONV

ONV ONV-IPS33021PF Manuale utente

ONV

ONV POE31016P Manuale utente

ONV

ONV ONV-POE31108PF Series Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente