Opticon OPI-3601 Manuale utente

2D Imager Scanner

OPI-3601

This manual provides specifications for the OPI-3601

handheld 2D imager scanner. Specifications Manual

OPI-3601

Specifications Manual

All information subject to change without notice.

Document History

Model Number: OPI-3601 Specification Number: SS12016

Edition: 1st Original Spec Number: SS12015

Date: 2012-09-21

This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any

electronic or machine readable form without prior written consent of Opticon.

Limited Warranty and Disclaimers

PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE

PRODUCT.

Serial Number

A serial number appears on all Opticon products. This official registration number is directly related to the device

purchased. Do not remove the serial number from your Opticon device. Removing the serial number voids the

warranty.

Warranty

Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in materials and

workmanship for two years after purchase. Opticon will repair or, at its option, replace products that are defective

in materials or workmanship with proper use during the warranty period. Opticon is not liable for damages caused

by modifications made by a customer. In such cases, standard repair charges will apply. If a product is returned

under warranty and no defect is found, standard repair charges will apply. Opticon assumes no liability for any

direct, indirect, consequential or incidental damages arising out of use or inability to use both the hardware and

software, even if Opticon has been informed about the possibility of such damages.

Packaging

The packing materials are recyclable. We recommend that you save all packing material to use should you need

to transport your scanner or send it for service. Damage caused by improper packaging during shipment is not

covered by the warranty.

Trademarks

Trademarks used are the property of their respective owners.

Opticon Inc. and Opticon Sensors Europe B.V. are wholly owned subsidiaries of OPTOELECTRONICS Co., Ltd.,

12-17, Tsukagoshi 4-chome, Warabi-shi, Saitama, Japan 335-0002. TEL +81-(0) 48-446-1183; FAX +81-(0) 48-

446-1184

SUPPORT

USA Europe

Phone: 800-636-0090

Email: support@opticonusa.com Email: support@opticon.com

Web: www.opticonusa.com Web: www.opticon.com

OPI-3601

Specifications Manual

Revision History

Specification No. : SS12016

Product name : OPI-3601

Edition Date Page Section Description of Changes

First 2012/09/21 - - Initial release

OPI-3601

Specifications Manual

Contents

1. Abstract........................................................................................................................................1

2. Overview ......................................................................................................................................1

3. Basic Specifications ...................................................................................................................2

4. Detailed View ...............................................................................................................................5

5. Electrical Specifications.............................................................................................................6

5.1. AC Adapter Specifications ...................................................................................................6

5.1.1. Input Specifications ................................................................................................................... 6

5.1.2. Output Specifications ................................................................................................................ 6

5.2. Wedge PS/2 Power Supply (Host).......................................................................................6

5.3. USB Power Supply ..............................................................................................................6

6. Optical Specifications.................................................................................................................7

6.1. Basic Optical Specifications.................................................................................................7

6.2. Aiming Pattern .....................................................................................................................8

6.3. Imaging Range.....................................................................................................................8

7. Technical Specifications ............................................................................................................9

7.1. Barcode Test Sample ........................................................................................................10

7.2. Scan Area and Depth of Field............................................................................................11

7.3. Printed Contrast Signal (PCS) ...........................................................................................12

7.4. Minimum Resolution ..........................................................................................................12

7.5. Wide Bar Code...................................................................................................................12

7.6. Pitch, Skew and Tilt ...........................................................................................................13

7.7. Curvature ...........................................................................................................................13

7.8. Auto Trigger .......................................................................................................................14

7.8.1. Stand Detection ....................................................................................................................... 14

7.8.2. Auto Trigger Detection ............................................................................................................ 15

7.8.3. Motion Tolerance..................................................................................................................... 15

8. Interface Specifications............................................................................................................16

8.1. RS-232C ............................................................................................................................16

8.1.1. Communication Setting ...........................................................................................................16

8.1.2. Signal Level and Pin Assignment............................................................................................ 16

8.1.3. RS-232C Interface Circuit .......................................................................................................17

8.2. USB....................................................................................................................................18

8.2.1. USB Interface Specifications................................................................................................... 18

8.2.2. Connector ................................................................................................................................ 18

8.2.3. USB Interface Circuit............................................................................................................... 18

8.3. Wedge PS/2.......................................................................................................................19

OPI-3601

Specifications Manual

8.3.1. How to Connect ....................................................................................................................... 19

8.3.2. Caution .................................................................................................................................... 19

8.3.3. Pin Assignment........................................................................................................................ 20

9. Cable and Connector ................................................................................................................21

9.1. RS-232C ............................................................................................................................21

9.2. USB....................................................................................................................................21

9.3. Wedge PS/2.......................................................................................................................22

9.3.1. Wedge PS/2 Straight Cable .................................................................................................... 22

9.3.2. Wedge PS/2 Branch Cable ..................................................................................................... 22

10. Environmental Specifications..................................................................................................23

10.1. Temperature ......................................................................................................................23

10.2. Humidity .............................................................................................................................23

10.3. Ambient Light Immunity .....................................................................................................24

10.4. Dust and Drip Proof ...........................................................................................................24

10.5. Cable Strength ...................................................................................................................25

10.6. Cable Bending Strength.....................................................................................................25

10.7. Vibration Strength (without packing) ..................................................................................25

10.8. Vibration Strength (in individual packing)...........................................................................25

10.9. Drop Impact Strength (without packaging).........................................................................26

10.10. Drop Impact Strength (in individual packaging) .........................................................26

10.11. Electrical Specifications .............................................................................................26

11. Default Setting...........................................................................................................................27

11.1. Default Setting Menu Code................................................................................................27

11.2. Supported Symbologies.....................................................................................................27

11.2.1. 1D bar codes ........................................................................................................................... 27

11.2.2. GS1 Databar, Composite Code............................................................................................... 28

11.2.3. 2D Codes................................................................................................................................. 28

11.3. Other Default......................................................................................................................29

11.4. RS-232C Default................................................................................................................29

11.5. USB-COM ..........................................................................................................................30

11.6. USB-HID, Wedge PS/2 Defaults........................................................................................30

12. Regulatory Compliance ............................................................................................................31

12.1. LED Safety.........................................................................................................................31

12.2. EMC ...................................................................................................................................31

13. RoHS...........................................................................................................................................31

14. Reliability ...................................................................................................................................31

15. Precautions................................................................................................................................31

OPI-3601

Specifications Manual

16. Product Labels ..........................................................................................................................32

17. Packaging Specifications.........................................................................................................33

17.1. Individual Packaging (RS-232C/Wedge PS/2)...................................................................33

17.2. Collective Packaging (RS-232C/Wedge) ...........................................................................34

17.3. Individual Packaging (USB) ...............................................................................................35

17.4. Collective Packaging (USB)...............................................................................................36

18. Physical Features......................................................................................................................37

18.1. Dimensions ........................................................................................................................37

18.2. Weight................................................................................................................................37

18.3. Mechanical Drawing...........................................................................................................37

19. Accessories ...............................................................................................................................38

19.1. AC Adapter Specifications .................................................................................................38

19.2. AC Adapter Mechanical Drawing .......................................................................................38

20. STD-3601 Stand (Sold Separately)...........................................................................................39

20.1. Stand Mechanical Drawing ................................................................................................39

OPI-3601

Specifications Manual

1. Abstract

This manual provides specifications for the OPI-3601 handheld 2D imager scanner.

2. Overview

The OPI-3601 is a handheld 2D imager scanner that enables high speed scanning of standard linear

(1D) and 2D symbologies. Main features of the OPI-3601 are as follows:

・High-speed scanning

Extremely high speed performance ensures stress free scanning and fast response without being

affected by hand movement and light conditions.

・Auto trigger, moving object scanning

With the use of a dedicated stand, the scanner is automatically triggered and a moving target can

be detected automatically and scanned instantaneously.

・Editing function

A new function “Data Editing Program” captures up to 16 codes on multiple images simultaneously

in one go. Output editing process, such as GS1 format, also can be set easily.

・World's most compact 2D scanner in its class

The OPI-3601 offers ultra-compact size and easy operation.

・LED aiming

A sharp single line of green LED makes it easy to aim the scanner while providing safety and long-

life.

・Antimicrobial coating

Special antimicrobial treatment is applied to the chassis, and alcohol can be used to clean the

scanner (except for the scanning window and the logo panel).

・Various interfaces

Four types of interfaces, RS-232C, Keyboard Wedge PS/2, USB-HID, and USB-COM, are

supported.

・RoHS compliance

The OPI-3601 is a RoHS compliant product, which is declared by Optoelectronics Co., Ltd.

* Refer to “OPI-3601 User’s Manual” for supported codes and commands.

OPI-3601

Specifications Manual

3. Basic Specifications

Item Specification Note

CPU CPU: ARM-926EJ-S

Core: 400 MHz

SDRAM 256 Mbits (2 M × 4 Banks × 32 Bits ) SDCLK: 133 MHz

Control

Section

Flash ROM 16 Mbits (1 M × 16 Bits) Flash Memory

RS-232C 300 bps ~ 115200 bps Default: 9600bps

USB USB2.0 Full-Speed 12 Mbps (HID/COM)

Interface

Wedge PS/2 Keyboard (selectable ‘with or without

keyboard connection’)

Scanning method WVGA (0.36 million-pixel) CMOS area sensor Frame rate: 60 fps

Scanning light source 2 red LEDs

Aiming light source 1 green LED

Effective pixels 0.36 million pixels (H: 752 x V: 480)

Optical Section

View angle Horizontal: about 40.6°

Vertical: about 26.4°

Symbologies

UPC-A, UPC-A Add-on, UPC-E, UPC-E Add-

on, EAN-13, EAN-13 Add-on, EAN-8, EAN-8

Add-on, JAN-8, JAN-13, Code 39, Tri-Optic,

Codabar (NW-7), Industrial 2 of 5, Interleaved

2 of 5, S-Code, IATA, Code 93, Code 128,

MSI/Plessey, UK/Plessey, TELEPEN, Matrix 2

of 5, Chinese Post Matrix 2 of 5, Code 11,

Korean Postal Authority code, Postal Code

Minimum resolution Code 39 : 0.127 mm PCS 0.9

Curvature Radius ≧16 mm (12-digit 0.15mm Codabar)

Radius ≧20 mm (13-digit UPC) PCS 0.9

Wide Bar Code Possible to read: Code 39 with 100 mm width

and resolution 0.2mm (DOF: 135 mm)

Motion tolerance Possible to read: UPC 100% moving at 2 m/s

(DOF: 100 mm)

Resolution (0.127) 65 ~ 105

Resolution (0.254) 45 ~ 185

Code 39

Resolution (0.508) 50~ 250

Code 128 Resolution (0.2) 65 ~ 150

Supported 1D Symbologies

Depth of field

(mm)

UPC Resolution (0.33) 45 ~ 175

Symbologies

GS1 DataBar, GS1 DataBar Limited, GS1

DataBar Expanded, Composite GS1-DataBar,

Composite GS1-128, Composite EAN,

Composite UPC

GS1 DataBar: formerly

called “RSS”

GS1/Composite

Minimum resolution GS1 DataBar : 0.169 mm

Composite Code: 0.169 mm

OPI-3601

Specifications Manual

Item Specification Note

Symbologies

PDF417, MicroPDF417, Codablock F, QR

Code , Micro QR Code, DataMatrix (ECC 0 -

140 / ECC 200), MaxiCode (Modes 2 to 5),

Aztec Code, Chinese Sensible Code

Disable Code 128

when Codablock F is

enabled.

Minimum resolution (mm)

PDF417 : 0.169 mm

QR Code : 0.212 mm

DataMatrix : 0.212 mm

PCS 0.9

Resolution (0.169) 60~ 120

PDF417

Resolution (0.254) 45 ~ 185

Resolution (0.212) 70 ~ 95

QR Code

Resolution (0.381) 35 ~ 165

Supported 2D Symbologies

Depth of field

(mm)

DataMatrix Resolution (0.254) 65 ~ 120

PCS 0.9

Pitch : ±40°

Skew : ±50°

Scan angle

Tilt : ±180°

Common

Minimum PCS 0.3 or more MRD: 32% or more

Image data format Windows Bitmap, JPEG

Shades of gray 1024, 256, 16, 2

Range of output image Select top/bottom (column) and left/right (row)

Resolution of output image Full,1/2, 1/4

Interface of output image RS-232C, USB-COM

Black spot may appear

on images, however, it

does not affect the

scanning performance..

USB-COM

(full speed) About 3 sec

Imager

Baud rate RS-232C

(baud rate: 15.2 kbps) About 40 sec

Resolution: Full

Range of operating voltage

4.5 ~ 5.5 V: USB

5.4 ~ 6.6 V: RS-232C / Wedge PS/2

(external power supply )

RS-232C / Wedge

(external power

supply): Dedicated AC

adapter 6.0 V ±5%

Reading 300 mA (max)

Power

Current

consumption

(RS-232C) Standby 75 mA (max)

At 6.0 V, room

temperature/ humidity,

Operating -20~ 50°C AC adapter: 0 ~ 40°C

Temperature

Storage -20 ~ 60°C

Operating 5 ~ 90% (no condensing, no frost)

Humidity

Storage 5 ~ 90% (no condensing, no frost)

Fluorescent 10,000 lx or less

Ambient light

immunity Sunlight 100,000 lx or less

UPC 100%

Optical axis angle: 75°

Distance: 100 mm

Vibration

10 Hz ~ 100 Hz, acceleration of 19.6 m/s2,

60 minutes per cycle, repeat once in each X, Y

and Z-direction

Drop

Drop 3 times, at each 5 faces (right, left, front,

back and top), from a height of 150 cm onto a

concrete surface.

* Excluding the part

where the interface

cable is attached

Environmental Specifications

Dust and drip proof IP42

OPI-3601

Specifications Manual

Item Specification Note

This scanner is an Exempt Risk Group LED product.

LED safety IEC 62471-1:2006 Exempt Risk Group Peak Wavelength:

624 nm

EMI/RFI VCCI / EN55022 / FCC Class-B

For residential,

commercial and light-

industrial environments

Product safety CE Marking

Regulatory

Electromagnetic compatibility

(EMC) EN55024 (EN61000-6-1) Class-B

For residential,

commercial and light-

industrial environments

No destruction 15 kV (Apply static electricity 50 times to the

surface of the scanner)

ESD immunity

No malfunction Contact discharge (direct / indirect): ±6 kV

Air discharge (direct):±8 kV

Condition:

IEC:61000-4-2

compliant

Frequency 80 ~ 1000 MHz

Level 3 V/m

Radio-

frequency

electromagnetic

field. Amplitude

modulation AM 80% (AM)

Condition:

IEC61000-4-3

compliant

Voltage Alternating-current input cable: ±1 kV

Pulse 5 / 50 ns (Tr / Tw)

Fast transient

Frequency 5 kHz

Condition:

IEC61000-4-4

compliant

Pulse 1.2 / 50 ns (Tr / Th)

From L to P : ±2 kV (closed-loop voltage)

Surge

Voltage

From L to L : ±1 kV (closed-loop voltage)

Condition:

IEC61000-4-5

compliant

Frequency 0.15 ~ 80 MHz

Level 3 V

Radio-

frequency

common mode AM 80% (AM)

Condition:

IEC61000-4-6

compliant

Frequency 50 and 60 Hz

Power

frequency

magnetic field Level 3 A/m

Condition:

IEC61000-4-8

compliant

Dip 1 Drop 30%, 0.5 cycles

Dip 2 Drop 60%, 5 cycles

Immunity Test

Voltage dip,

momentary

voltage drop,

fluctuation Momentary

drop Drop > 95%, 250 cycles

Condition:

IEC61000-4-11

compliant

Dimensions Approx. 56.0 × 108.1 × 148.6

(WDH mm)

Physical

Features

Weight Approx. 85g Excluding the interface

cable

Model name SFP0602000P-PSE Accessories:

conversion plug

Voltage range AC 90 ~ 265 V

Input

Supply current 0.5 A (max)

Voltage range 5.7 ~ 6.3 V

External Power

Supply

Output Maximum

current 2.0 A (max)

Indice

Altri manuali Opticon Lettore di codici a barre

Opticon

Opticon M-5 Manuale utente

Opticon

Opticon OPR 3001 Manuale utente

Opticon

Opticon OPR 2001 Manuale utente

Opticon

Opticon OPR 3201 Manuale utente

Opticon

Opticon Code Reader 2.0 Manuale utente

Opticon

Opticon OPN2002 Istruzioni per l’uso

Opticon

Opticon PHL 2700 Manuale utente

Opticon

Opticon CRD-3301 Manuale utente

Opticon

Opticon 25-USBQSTART-01 Manuale utente

Opticon

Opticon C 37 Manuale utente

Opticon

Opticon OPR3301 Manuale utente

Opticon

Opticon NLB 9625 Manuale utente

Opticon

Opticon OPN2004 Guida utente

Opticon

Opticon UNIVERSAL MENU BOOK Istruzioni per l'installazione

Opticon

Opticon OPL 7836 Manuale utente

Opticon

Opticon OPL9813 Manuale utente

Opticon

Opticon OPN-3102i Manuale utente

Opticon

Opticon STD-3201 Manuale utente

Opticon

Opticon 8000 Guida utente

Opticon

Opticon NLV-4001 Manuale utente

Opticon

Opticon OPN-3102i Manuale utente

Opticon

Opticon LPN5627 Manuale utente

Opticon

Opticon OPR 2001 Manuale utente

Opticon

Opticon OPR 3001 Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente