Optoma EzPro730 Manuale utente

SERVICE MANUAL

EzPro730 0.7*1 DMD SVGA Micro Portable Projector

This manual is prepared for the maintenance service for EP 30 Micro Portable SVGA DLP

Projector. Maintenance procedures described in this manual are intended to isolate faulty parts and

replace them in the field. It also aims to serve as a guide in procuring replacement parts for this

product.

This manual is copyrighted and all rights are reserved. This product may not, in whole or in

part, be copied, photocopied, translated or reduced to any electronic or machine readable form

without prior written consent except for copies retained by the purchaser for backup purpose.

This manual includes system overview, major system assembly, components description, and

the Troubleshooting making explanations on how to detect errors. It also includes a flow chart for

checking or correcting faults.

No warranty or representation, either expressed or implied, is made with respect to this

documentation, its quality, performance, merchantability or fitness for

particular purpose.

No event that the vendor will be liable for direct, indirect, special, incidental or

consequential damages arising out of the user or inability to use this product or documentation.

- NOTI E :

The information found in this manual is subject to change without prior notice. Any

subsequent changes made to the data herein will be incorporated in further edition.

Manual Version 1.0

Doc.#833-G04-01A

P/N : 36.83303.001

Preface

All manuals and user guides at all-guides.com

all-guides.com

SERVICE MANUAL

EzPro730 0.7*1 DMD SVGA Micro Portable Projector

4TABLE OF ONTENTS 3

1. Introduction 1-1

1-1 Product Highlight 1-2

1-2 Technical Specification 1-3

2. Fundamental Principle 2-1

2-1 System Block Diagram 2-2

2-2 Optics 2-6

3. Mechanical onstruction 3-1

3-1 Package Overview 3-2

3-2 Exploded Overview 3-4

3-3 Recommendation Spare Parts List 3-11

4. Procedure of Disassembly 4-1

4-1 Disassemble Top Cover and Speaker 4-3

4-2 Disassemble Main Board and DC-DC Module 4-4

4-3 Disassemble Engine, Formatter Board and Thermal Board 4-6

4-4 Disassemble Ballast Module 4-9

4-5 Disassemble Fan Modules 4-10

4-6 Disassemble Lamp Module 4-12

4- Disassemble Switch Board and Thermal Sensor Board 4-14

5. The Function of Boards 5-1

5-1 Main Board 5-2

5-2 Formatter Board 5-9

5-3 IR Board 5-15

5-4 DC-DC Power 5-16

5-5 Thermal Board 5-18

5-6 Ballast 5-23

All manuals and user guides at all-guides.com

SERVICE M ANUAL

EzPro730 0.7*1 DMD SVGA Micro Portable Projector

6. Specifications 6-1

6-1 Lamp Specifications 6-2

6-2 DMD Specifications 6-4

6-3 DC-DC Specifications 6-10

6-4 Lamp Driver Specifications 6-11

7. Troubleshooting Procedure 7-1

-1 Equipment Needed -2

-2 Main Procedure -2

8. Function Test and Alignment Procedure 8-1

8-1 Equipment Needed 8-2

8-2 Test Condition 8-2

8-3 Test Display Modes and Pattern 8-3

8-4 Inspection Procedure 8-

9. Firmware Upgrading Procedure 9-1

9-1 Equipment Needed 9-2

9-2 Setup Procdure 9-2

9-3 Upgrading Procdure 9-3

10. Appendix 10-1

10-1 Serial Number Format 10-2

All manuals and user guides at all-guides.com

SERVICE MANUAL 1 - 1

EzPro730 0.7*1 DMD SVGA Micro Portable Projector

Chapter 1

Introduction

This manual is applied to EP 30 0. *1 DMD SVGA Micro Portable

Projector with digital imaging functionality based on Digital Micromirror Device

(DMD) technology. Its the mode of single panel, 130 watt Compact P-VIP lamp

and 800*600 resolution. The manual gives you a brief description of basic

technical information to help in service and maintaining the product.

Your customers will appreciate the quick response time when you

immediately identify problems that occur with our products. We expect your

customers will appreciate the service that you offer them.

This manual is for technicians and people who have an electronic

background. Send the product back to the distributor for repairing and do not

attempt to do anything that is complex or is not mentioned in the troubleshooting.

All manuals and user guides at all-guides.com

SERVICE MANUAL 1 - 2

EzPro730 0.7*1 DMD SVGA Micro Portable Projector

1-1 Product Hi hli ht

¶One panel 0.  DMD projection system with 825 ANSI lumens (Average), 0%

uniformity.

¶130 - Watt Compact P-VIP Lamp (user replaceable).

¶Hight efficiency cooling system with system acoustic noise level 38dBA (Average).

¶Light weight less then 3.4 lbs.

¶Manual focus projection zoom lens.

¶True 8003600 resolution, true colors.

¶With up, down, left, and right screen reverse.

¶Build-in full screen NTSC/PAL/SECAM video capability with S-video/compoite

/component and HDTV terminals.

¶SXGA / XGA / SVGA / VGA / MAC / PC98 / FM Towns compatibility with XGA

compression/pan.

¶Auto image re-sizing to 800*600 full screen.

¶Auto detection of computer signal input.

¶Auto image. (Auto-tracking / frequency / position adjustment).

¶Powerful enlarge and freeze function.

¶Automatically saves adjustments for future use.

¶On-screen menu with 9 languages.

¶On screen lamp life timer.

¶One D-sub PC-data input.

¶Built-in one speaker with 2 watt amplifier.

¶Self protect (15 seconds) timer for hot re-strike of compact P-VIP lamp.

¶Wireless remote controller.

¶Adaptive voltage control fan speed.

All manuals and user guides at all-guides.com

SERVICE MANUAL 1 - 3

EzPro730 0.7*1 DMD SVGA Micro Portable Projector

1-2 Technical Specification

1-2.1 Mechanical Specifications

Dimensions (W*H*D) - 8.86*6.93*2.0 inches (225*1 6*52mm)

Weight - Approx. 3.4 lbs. (1.52 Kg)

Cooling System - Advanced Air Flow

- Three Motor FAN with system acoustic 38 dBA (Average)

- Temperature control circuits with Fan speed

Tilt Angle - 8 degree with elevator mechanism

Keystone correction - +/-16 degree (32 degree)

Color - Silver

Lamp Door Protection - Lamp Power Supply shut off automatically when door open

1-2.2 Display Panel Specifications

- T1 DMD, 0.  Digital Mirror Device

- Number of active dots : 800 (H) * 600 (V)

1-2.3 Electrical Specifications

Power Supply - Universal AC 100-240V~50/60 Hz with PFC input(OSRAM)

- 130W for 130W Compact P-VIP Lamp @ normal operation

- Variance FAN speed control (Depend on temperature variant)

Terminals - Computer input (DVI Female Terminal*1)

- Video input (RCA jack Type*1, DIN 4-pin*1 S-video)

- Audio input (Phone jack Type*1)

Audio - One 8-Ohm, 2W, internal speaker

- 3 Watts amplifier

- Input sensitivity 0.3Vrms.

All manuals and user guides at all-guides.com

all-guides.com

SERVICE MANUAL 1 - 4

EzPro730 0.7*1 DMD SVGA Micro Portable Projector

Input signal spec - Hsync Frequency 15~100 KHz

- Vsync Frequency 43~120 Hz

- Video Signal RGB (PC)

Analog RGB 0. Vp-p, 5 ohm

Analog RGB 1Vp-p, 5 ohm, Sync. signal

Separate TTL H, V Sync.

Composite TTL Sync.

- Video

Composite video 1Vp-p, 5 ohm

S-Video Luminance 0. 14Vp-p, 5 ohm

Chrominance 0.286Vp-p, 5 ohm

Video Compatibility - Standards :

NTSC - M, 4.43 MHz

PAL - B, D, G, H, I, M, N

SECAM - B, D, G, K, K1, L

HDTV - 480I, 480P, 5 6P, 20P

- TV Lines - 500 lines

1-2.4 Re ulation

FCC Part15 Class B, CE--Class B, VCCI Class B, BSMI

UL, CUL, TüV--GS

All manuals and user guides at all-guides.com

SERVICE MANUAL 1 - 5

EzPro730 0.7*1 DMD SVGA Micro Portable Projector

1-2.5 Optical Specifications

Projection lens - F/2.2~2.4, f = 28.51~34.21mm. 1.2X Manual Zoom Lens.

Projection Image Size - Adjustable from 20.5 to 246 (Diagonal)

Throw Distance - 1.0m~12m

Brightness - 825 ANSI Lumens (Average)

- 00 ANSI Lumens (Minumim)

Contrast - 300 : 1 (Full White and Black)

Uniformity - 50% (ANSI standard)

- 60% (3*3)

- 5% (Japan standard)

1-2.6 Environmental

Temperature - Operating : 10~40oC

- Storage : -20~60oC

Maximum Humidity - Operating : 10~40oC, 80%RH (Max.), non-condensing

- Storage : -20~60oC, 80%RH (Max.), non-condensing

Acoustic noise level - 38dBA (Average, Under 25oC)

- Less than 40dBA (minumim)

Lamp life - 1000 hours min. 0% survial rate

1500 hours typical, 50% survial rate

Altitude - Operating 10,000 ft

- Storage 40,000 ft

- Operating more than 10,000 hours (80% Confidence Level)

Reliability Test - Refer 0 -3021, Reliability Test Procedure;

0 -3022, Reliability Test Standard

All manuals and user guides at all-guides.com

SERVICE MANUAL 2 - 1

EzPro730 0.7*1 DMD SVGA Micro Portable Projector

Chapter 2

Fundamental Principle

Thi ection provide the conceptual drawing about optic of projector. You

can realize optical projection y tem through the following diagram and al o the

integral part of configuration.

All manuals and user guides at all-guides.com

SERVICE MANUAL 2 - 2

EzPro730 0.7*1 DMD SVGA Micro Portable Projector

2-1 Syste Block Diagra

Speaker IR Receiver

S-Video

Video

Audio

D-Sub

Input

Main

Board

DMD

Board

DMD

DC to DC

Inter Lock Switch

Thermal

Board

Fan

Balla t

Thermal

Switch

Sen or

Board

Projection Len

Mirror

Conden er

Hollow Rod

Color Wheel

UV-IR L3

Lamp

Conden er

Keypad

Board

Mirror

All manuals and user guides at all-guides.com

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Optoma Proiettore

Manuali Proiettore popolari di altre marche

iEmmet

iEmmet MP-312 Manuale utente

Epson

Epson VS400 Manuale utente

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuale utente

Sony

Sony VPL-HW65ES Manuale di servizio

Toshiba

Toshiba TLP-791U Manuale utente

Philips

Philips LC1341 Guida di riferimento

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuale utente

NEC

NEC NP600S EDU Manuale utente

BenQ

BenQ SH753P Manuale utente

Eiki

Eiki EK-623U series Manuale utente

Epson

Epson PowerLite Pro Cinema 6020UB Manuale utente

Epson

Epson PowerLite Home Cinema 705HD Manuale utente

Christie

Christie LHD700 Manuale utente

Navitar

Navitar FX Manuale utente

InFocus

InFocus LitePro 560 Manuale utente

Sony

Sony SRX-R815P Manuale utente

Vivitar

Vivitar DP1500 X Manuale utente

Acer

Acer C20 Series Manuale utente