ORIENT Technologies BTP-R580 Manuale utente
BTP-R580
BTP-R580 USER MANUAL
USER’S MANUAL
Receipt Printer
BTP-R580
Shandong New Beiyang Information Technology Co., Ltd.
ORIENT Technologies bv
BTP-R580 USER MANUAL
- 1 -
Content
Declarations......................................................................1
General Safety Instruction...............................................5
1 Introduction....................................................................7
1.1 Outline......................................................................................7
1.2 Main Features..........................................................................7
2 Main Specification.........................................................9
2.1 Technical Specification ............................................................9
2.2 Cutter Specification................................................................10
2.3 Paper Specification................................................................10
2.3.1 Continuous paper............................................................10
2.3.2 Marked paper..................................................................12
2.4 Print and cut position.............................................................13
2.4.1 Print position...................................................................13
2.4.2 Cut position.....................................................................14
3 Outline and Parts.........................................................15
3.1 Outline and Parts...................................................................15
3.2 Error LED and Buzzers..........................................................17
4 Installation....................................................................19
4.1 Unpacking..............................................................................19
4.2 Printer installation..................................................................19
4.3 Connecting the PowerAdapter..............................................20
4.4 Connecting interface cable....................................................21
4.5 Connecting the Cash Drawer................................................21
4.6 Paper roll loading...................................................................22
BTP-R580 USER MANUAL
- 2 -
4.6.1 Confirm the paper type ...................................................22
4.6.2 Load/replace a paper roll................................................22
4.7 Paper near end position adjustment .....................................23
4.8 Switching on the printer and printing of self-test...................25
4.8.1 Switching on the printer..................................................25
4.8.2 Printing a self-test page..................................................25
4.9 Setting of printer parameters and configuration....................25
5 Printer routine maintenance.......................................27
5.1 Cleaning the platen................................................................27
5.2 Cleaning the mark sensors....................................................27
5.3 Clearing of a paper jam.........................................................28
6 Interface signal............................................................29
6.1 Parallel interface....................................................................29
6.2 Serial interface.......................................................................30
6.3 USB interface.........................................................................31
6.4 Ethernet interface..................................................................31
6.5 WLAN interface......................................................................33
6.6 Signal definition of power connector.....................................33
6.7 Signal definition of cash drawer interface .............................34
7 Troubleshooting ..........................................................36
7.1 Printer doesn’t work...............................................................36
7.2 Alarm LED and buzzer sound................................................36
7.3 Problems with printing...........................................................37
7.4 Cutter resetting......................................................................37
8. Accessories ................................................................38
8.1HERALD – kitchen alarm system...........................................38
APPENDIX A: FEED button Configuration ...................39
BTP-R580 USER MANUAL
- 1 -
Declarations
Changes without notice
Information in this document is subject to change without notice.
ORIENT Technologies bv (hereinafter referred to as “ORIENT
Technologies”) and SHANDONG NEW BEIYANG INFORMATION
TECHNOLOGY CO., LTD. (hereinafter referred to as “SNBC”)
reserves the right to improve products as new technology,
components, software, and firmware become available. If users
need further data about this product or have any doubt about safety
issues that might arise from using it, please feel free to contact
ORIENT Technologies, SNBC or your local agents.
Copyright
No part of this document may be reproduced or transmitted in any
form or by any means, electronic or mechanical, for any purpose
without the express written permission of ORIENT Technologies or
SNBC.
Copyright © 2007 by SNBC
Printed in China
Version 1.0
BTP-R580 USER MANUAL
- 2 -
Trademarks
Our registered trademarks are
Warnings and Cautions in this manual
Warning:
Items shall be strictly followed to avoid
damages to body and equipment.
Caution:
Items with important information and prompts
for operating the printer.
Certifications
The quality control system of SNBC has been approved of the
following certification.
(DNV)ISO9001:2000
BTP-R580 USER MANUAL
- 3 -
The environmental control system of SNBC has been approved of
the following certification.
(DNV)ISO14001:2004
BTP-R580 has been approved of the following certification.
WEEE directive 2002/96/EC
ORIENT Technologies bv is complying with all aspects of the
European Union’s WEEE directive 2002/96/EC. All the customers
and end-users can send the products that have reached the end of
their lifes and are to be recycled, to ORIENT Technologies bv.
ORIENT Technologies bv will take care of the recycling of these
products in an environmentally responsible manner in accordance
with WEEE directive.
BTP-R580 USER MANUAL
- 4 -
Contact us
In CHINA:
Address: No.169 Huoju Rd, Weihai, Shandong, China. 264209
Hot line: +86-631-5673777
Fax: +86-631-5673778
E-mail: sales@newbeiyang.com
Website: www.newbeiyang.com (via Contact button)
In EUROPE: ORIENT Technologies bv
Address: Meerheide 115, 5521 DX Eersel, The Netherlands
Hot line: +31-497-331080
Fax: +31-497-386430
Website: www.orient-technologies.com (via Contact button)
BTP-R580 USER MANUAL
- 5 -
General Safety Instruction
Before installing and using the printer, please read the following
items carefully:
1．
Safety Instructions
Caution: Do not touch the cutter of the printer.
Heating: The print head is at a high temperature during
printing or just after operation. Do not touch it
and its peripherals for reasons of safety.
Warning: The print head is an ESD-sensitive device. To
avoid damage, do not touch either its printing
parts or connecting parts.
2．
．．
．Caution
1) Install the printer on a flat and stable surface.
2) Reserve adequate space around the printer so that convenient
operation and maintenance can be performed.
3) Keep the printer away from water source, direct sunlight, strong
light and heat.
4) Do not use or store the printer in a place exposed to heat or fire,
moisture or other pollution.
5) Do not place the printer in a place exposed to vibration or
impact.
6) No dew condensation is allowed to the printer. In case of such
condensation, do not turn on the power until it has completely
gone away.
BTP-R580 USER MANUAL
- 6 -
7) Connect the power cord to an appropriate grounding outlet.
Avoid sharing a single electrical outlet with large power motors
and other devices that may cause the fluctuation in voltage.
8) Disconnect the power cord if the printer is idle for a long time.
9) Do not spill water or other electric substances (like metal) on the
printer. If this happens, turn off the power immediately.
10) Do not allow the printer to start printing when there is no
recording paper installed, otherwise the print head and platen
roller will be damaged.
11) To ensure quality print and normal lifetime, use recommended
or good quality paper.
12) Shut down the printer when connecting or disconnecting
interface connectors to avoid damage to the control board.
13) Set the print darkness to a lower grade as long as the print
quality is acceptable. This will help to keep the Printhead
durable.
14) The printer should only be disassembled or repaired by a
technician, who is certified by ORIENT Technologies.
15) Keep this manual safe and at hand for reference purpose.
Indice
