Orient KFB TT Manuale utente

CHRONOGRAPH <KFB (TT)>

INSTRUCTION MANUAL

Thank you for your purchase of our product. To ensure prolonged use and opti-

mum performance, please read this Instruction Manual carefully and familiarize

yourself with the terms of the guarantee.

Please keep this Instruction Manual in your hand and refer in time of need.

◆Specifications

(1) Crystal oscillator frequency

32,768 Hz (Hz = Oscillations per second)

(2) Wrist-worn accuracy (at normal temperature <5°C ~ 35°C>)

Mean monthly rate: ±20sec.

(3) Operating temperature range

–5°C ~ +50°C

(4) Drive system

Step motor: 4 pieces

(5) Display system

[Time function]

Hour and minute hands with a small second hand that moves at one-second intervals.

[Stopwatch function]

Stopwatch 1/20 second hand turns a full circle in a second at 1/20 second intervals.

Stopwatch second hand turns a full circle in 60 seconds at one-second intervals.

Stopwatch minute hand turns a full circle in 60 minutes at one-minute intervals.

Stopwatch hour hand turns a full circle in 12 hours while moving correspond-

ingly with the stopwatch minute hand.

(6) Battery

Silver oxide battery SR927W; 1 piece

(7) Battery life

Approx. 3 years if the stopwatch is used for less than 2 hours a day.

(8) IC (Integrated Circuit)

C-MOS-1C; 1 piece

The above specifications are subject to change without notice for improvement.

ENGLISH

◆FEATURES

This is a multi-display analogue watch featuring a stopwatch function.

It is a very convenient multi-function watch.

•The current time is indicated by the hour and minute hands and a small second

hand.

•The stopwatch can measure up to 12 hours in 1/20 second increments. The

time measured is indicated by the four stopwatch hands (stopwatch 1/20 sec-

ond, second, minute and hour hands). Split time measurement is also available.

After 12 hours, the stopwatch will automatically stop and reset.

◆DISPLAY AND CROWN / BUTTON OPERATION

Button A(Start/Stop of the stopwatch)

Crown

Second click

(Time setting and adjusting the stopwatch hand position)

First click (Date setting)

Normal position

Button B(Split/Split release/Reset)

◆SETTING THE TIME AND ADJUSTING THE STOPWATCH

HAND POSITION

(Hands for time display and stopwatch hands)

This watch is so designed that

•time setting and

•stopwatch hand position adjustment

are both made with the crown at the second click position. Once the crown is

pulled out to the second click, be sure to make the above adjustments at the same

time.

Stopwatch hands

(Stopwatch 1/20 second and second hands)

Hands for time display

(Hour and minute hands and small second hand)

Stopwatch hands

(Stopwatch hour and minute hands)

Crown

■ How to set the time

Pull out the crown to the second click when the small second hand is at the 12

o’clock position.

The small second hand stops on the spot.

Small second

hand

*If the stopwatch is measuring, the stopwatch hands are automatically reset to

“0” position.

Turn the crown to set the hour and minute hands to the desire time.

*When setting the hour hand, check that AM/PM is correctly set.The watch is so

designed that the date changes once in 24 hours.

*When setting the minute hand, first advance it 4 to 5 minutes ahead of the

desired time, and then, turn it back to the exact minute.

It is recommended that the hands be set

to the time a few minutes ahead of the

current time, taking into consideration the

time required to adjust the stopwatch

hand position if necessary.

Reset the four stopwatch hands to “0” position.

Press button Afor 2 seconds to select the stopwatch hand to be adjusted.

Stopwatch 1/20

second hand

Stopwatch hour and minute hands

Stopwatch second hand

Button A

Button B

Press button Brepeatedly to reset the selected stopwatch hand to “0” position.

It moves quickly if button Bis kept pressed.

Press button Afor 2 seconds.

The stopwatch 1/20 second hand

turns a full circle to indicate that it is

ready for adjustment.Press button B

to reset it to “0” position.

The stopwatch second hand turns a

full circle to indicate that it is ready

for adjustment. Press button Bto re-

set it to “0” position.

The stopwatch hour and minute hands

turn a full circle to indicate that they

are ready for adjustment. Press but-

ton Bto reset it to “0” position.

4After all the adjustments are completed, push the crown back in to the normal

position in accordance with a time signal.

*Check that the hour and minute hands for the time display indicate the cur-

rent time, then, push the crown back in to the normal position.

Adjusting the stopwatch second

hand to “0” position

Adjusting the stopwatch 1/20 sec-

ond hand to “0” position

Adjusting the stopwatch hour and

minute hands to “0” position



◆HOW TO SETTHE DATE

•Be sure to set the time before setting the date.

•It is necessary to adjust the date on the first day of March and months following

30-day months.

Pull out the crown to the first click.

Turn the crown clockwise to set the date.

*Do not set the date between 9:00 p.m. and 1:00 a.m. Otherwise, the date

may not change properly. If it is necessary to set the date during that time

period, first change the time to any time outside it, set the date and then,

reset the correct time.

After all the adjustments are completed, push the crown back in to the normal

position.

◆HOW TO USETHE STOPWATCH

•The stopwatch can measure up to 12 hours in 1/20 second increments.After 12

hours, it will automatically stop.

•The time measured is indicated by the four stopwatch hands that move inde-

pendently of the hands for time display.

•After the stopwatch is started, the stopwatch 1/20 second hand moves for about

10 minutes and automatically stops at “0” position. When split time is measured

or the measurement is stopped, it moves to indicate the elapsed 1/20 seconds.

•Split time measurement is available.

[How to read the stopwatch hands]

The time measured is indicated by the four stopwatch hands (stopwatch 1/20

second, second, minute and hour hands).

1 hour, 30 minutes and 10.85 seconds

Stopwatch 1/20 second hand

(Elapsed time less than 1 second) Stopwatch second hand

(Elapsed seconds)

Stopwatch hour hand

Stopwatch minute hand (Elapsed hours

and minutes: Read the hands as you

read the hour and minutes of

conventional analogue watches.)

Time measured is indicated by the four stopwatch hands.

[Notes on the movement of the stopwatch 1/20 second hand]

•After the stopwatch is started, the stopwatch 1/20 second hand moves for about

10 minutes and automatically stops at “0” position.

•When split time is measured or the measurement is stopped, if moves to indi-

cate the elapsed 1/20 seconds.

•After split time is released or the measurement is restarted, it moves for about

10 minutes and stops automatically.

•In the same manner, if the stopwatch is stopped and restarted repeatedly or

split time is measured and released repeatedly, it moves for about 10 minutes

and stops automatically.

•If the stopwatch hands do not return to “0” position when the stopwatch is

reset, follow the procedure in “◆ SETTING THE TIME AND ADJUSTING

THE STOPWATCH HAND POSITION” to reset them.

•In that case, be sure to adjust the hands for time display to the current time.

■ How to reset the stopwatch

•When the stopwatch hands are counting:

Press button Ato stop the stopwatch.

Press button Bto reset the stopwatch.

•When the stopwatch hands are stopped:

One of the following three stopwatch operations

has occurred.Reset the stopwatch accordingly.

[The stopwatch was stopped in“Standard mea-

surement” or “Accumulated elapsed time mea-

surement.”]

Press button Bto reset the stopwatch.

[Split time was measured and remains displayed “Split time measurement.”]

Press button B. The split time is released and the stopwatch hands move

quickly to indicate the measurement in progress.

Press button Ato stop the stopwatch.

Press button Bto reset the stopwatch.

[The time of the 2nd competitor was measured in “Measurement of two com-

petitors.”]

Press button B. The stopwatch hands move quickly and stop.

Press button Bto reset the stopwatch.

■ Standard measurement

Button B

Button A

START

Button A

STOP

Button B

RESET

→

Button A

START

Button A

STOP

Button A

RESTART

Button A

STOP

Button B

RESET

→

→→ →→

.....

■ Accumulated elapsed time measurement



Restarting and stopping the stopwatch can

be repeated by pressing button A.

Button A

START

Button B

SPLIT

Button B

SPLIT RELEASE

Button A

STOP

Button B

RESET

■ Split (intermediate) time measurement

Measurement and release of the split time

can be repeated by pressing button B.



→→ →→

Button A

START

Button B

FINISH TIME

OF FIRST

COMPETITOR

Button

SECOND

COMPETITOR

FINISH

Button B

FINISH TIME

OF SECOND

COMPETITOR

Button

RESET

■ Measurement of two competitors

→→ →→

400

250

100

110

120

140

160

180

200

300

500

400

250

100

110

120

140

160

180

200

300

500

•Measurement of speed per hour

1.Measure the time required to run 1

km.

2.Read the tachymeter figure which

the second hand is indicating. (70

km/hour)

1 km

Start Stop

◆Operating the tachymeter

(for a item that has tachymeter scale on the dial)

•Measurement of output per hour

1.Measure the time required to pro-

duce one product.

2.Read the tachymeter figure which

the second hand is indicating. (70

pieces/hour)

400

250

100

110

120

140

160

180

200

300

500

400

250

100

110

120

140

160

180

200

300

500

One product

Start Stop

◆NOTES ON THE SCREW DOWN CROWN AND BUTTONS WITH

PROTECTOR RINGS

•Some models have a screw down crown and buttons with protector rings that

can be locked while they are not used.

•Locking the crown and buttons will prevent mistaken operation of the watch and

enhance its water-resistant quality.

•Unlock the crown and buttons when operating them, and be sure to lock them

after use.

■ Models with screw down crown

•If your watch has a screw down crown, it is necessary to unlock the crown by

unscrewing it before operating it.

•Except when you operate the crown, be sure that it is always locked by screwing

it in completely.

[How to unlock the crown]

Unscrew the crown by turning it counterclockwise.

The crown can be pulled out or turned for time/

calendar setting or other watch operations.

The crown is locked.

The crown is unlocked.

*The crown can be

pulled out.

[How to lock the crown]

After using the crown for watch operation, turn it

clockwise while pressing it until it locks in place.

■Models having buttons with protector rings

•If your watch has buttons with protector rings, it is necessary to unlock them by

unscrewing the protector ring attached to the side face of the buttons before

using them for watch operation.

•Except when you operate the buttons, be sure that they are always locked by

screwing in the protector rings completely.

[How to unlock the button]

Unscrew each protector ring com-

pletely by turning it counterclockwise.

The buttons are unlocked for watch

operation.

*If the protector ring is not unscrewed

completely, the button may not be

pressed. When unscrewing the pro-

tector ring, however, do not turn it

forcibly.

[How to lock the button]

After using the buttons for watch op-

eration, turn each protector ring clock-

wise until it locks in place.

*Do not screw in the protector ring

forcibly.

Button protector

(Button locked) (Button unlocked)

(Button unlocked) (Button locked)

*The button is

unlocked for

watch operation.

Indice

Lingue:

Altri manuali Orient Orologio

Orient

Orient TT(KFB) Manuale utente

Orient

Orient TT(KFB) Manuale

Orient

Orient UG1R002B Manuale utente

Orient

Orient WE (KL7) Manuale utente

Orient

Orient BF J50 Manuale utente

Orient

Orient UT (H4A) Manuale utente

Orient

Orient DB 46A Manuale utente

Orient

Orient GNA Manuale utente

Orient

Orient KU(RMC) Manuale utente

Orient

Orient XC Manuale utente

Orient

Orient UY (KTA) Manuale utente

Orient

Orient UB8A002B Series Manuale utente

Orient

Orient ES 46C Manuale utente

Orient

Orient RK-AU0301B Manuale utente

Orient

Orient CFA02001B Manuale utente

Orient

Orient UU(KHA) Manuale utente

Orient

Orient FFT00001W0 Manuale utente

Orient

Orient TV(KFC) Manuale utente

Orient

Orient SDH00001 Manuale utente

Orient

Orient BEM5L003 Manuale utente

Orient

Orient M14 Manuale utente

Orient

Orient KFA (TD) Manuale utente

Orient

Orient ST(KUD) Manuale utente

Orient

Orient TZ(KFE) Manuale utente

Manuali Orologio popolari di altre marche

Pandora

Pandora WATCH2 Manuale utente

Casio

Casio QW-4343 Manuale utente

Suunto

Suunto X6 Manuale utente

Seiko

Seiko N830 Manuale utente

MotionX

MotionX 365 Manuale utente

Garmin

Garmin VENU SQ 2 Manuale utente

QCY

QCY Watch GTC Manuale utente

Canyon

Canyon Cindy CNE-KW41WP Manuale utente

Esq

Esq Watches Guida all'installazione

Crane

Crane AA5-CDSM-3A Manuale utente

Timex

Timex W-214 Manuale utente

DETOMASO

DETOMASO MATERA Manuale utente

Geemarc

Geemarc Watch N Shake Manuale utente

LORUS

LORUS W590 Manuale utente

STENLILLE

STENLILLE Actío Manuale utente

Casio

Casio 5594 Manuale utente

Sinn

Sinn HUNTER'S WATCH 3. Edition Manuale utente

Slazenger

Slazenger SLZ800 Manuale utente