Orion OF1606 Manuale utente
http://www.orion.ua
I
IN
NS
ST
TR
RU
UC
CT
TI
IO
ON
N
M
MA
AN
NU
UA
AL
L
ELECTRIC FAN
Model: OF1606
ENGLISH GB
AC230V~50Hz, 55W
RoHS
http://www.orion.ua
2
DEAR CUSTOMERS!
MANY THANKS FOR BUYING ORION ELECTRIC FAN!
We really believe you will get the greatest pleasure from using this device for the years!
Please, read the user’s guide in detail before first using of this fan.
CAUTION
1. Never put your finger or other something into the cover to avoid any burst.
2. Make sure to keep the fan far away from humidity, chemical articles and oil.
3. While cleaning, be sure not to splash water and do not use oil, alcohol or chemical articles as
they may cause distortion of fan body and cause electrical hazards.
4. Do not pull out the power supply by pulling power supply cord, which may lead to electrical
shock or generating electrical shock.
5. Keep away from curtain; clothing or other something may affect the fan’s working.
6. Turn off all switches and pull out power supply plug when you go out for a long time.
7. Never use the fan before finishing assembly to avoid any hurts.
8. If the supply cord is damaged, it must be repaired by the manufacture or its service agent or a
similarly qualified person in order to avoid hazard.
9. If the unit doesn’t work before sending for maintaining, please check the plug of power supply
has been inserted into socket with electricity.
10. Do not use the electric fan in rain.
11. This appliance is not intended for use by person (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
PARTS
http://www.orion.ua
3
1. Shroud ring. 7. Output shaft 13. External joint
2. Front cover 8. Motor and motor cover 14. Support tube
3. Fastener for fan blade 9. Joint 15. Dustproof cover
4. Лопасти. 10. Panel 16. Cover of base
5. Fan blade 11. Bolt 17. Aided base
6. Back cover 12. Up-down tube 18. Fastener for support tube
INSTALLING AND USING
First step: assemble and connect the base with assembly up-down tube and support tube.
Open the casing and take our base. Then assemble the tube and cover of up-down tube and
support tube. Slip decorative cover to base alongside the tube of support tube and adjust up-
down tube to height. Then rotate tighten the external joint.
Second step: assemble fan blade
1) Assemble guard cover and shroud ring
Tighten back cover enclosure to the motor by fastener.(pay attention to direction of rotation).
Place joint of shroud ring downwards and cover the deep groove of shroud ring to the circle side
of back cover enclosure. Then tighten the bolts at the position of joint properly by nut.
2) Install fan blade
While installing fan blade, please wedge groove on the back of fan blade on spacer pin of
output shaft motor. Then tighten the fixing nut of fan blade anti-clockwise.
3) Assemble front cover
Insert the circle of front cover into the groove of shroud ring, which has been fixed to the back
cover. Finally fasten the bolts into screw of the joint of shroud ring.
REMOTE CONTROLLER
OPERATION
Setting of wind speed and wind type
Pressing button of wind speed can adjust the speed of wind, which have 8 speeds. Wind type:
sleeping, normal and natural – press Wind mode button to select.
Setting of shaking
Press the swing button and fan will rotate.
Setting of timer
This fan can work 30min, 60min, 90min, 120min, 150min, 180min 210min, 240min, 270min,
300min, 330min, 360min, 390min, 420min and 450min by setting the timer:
press 1:30min, 0.5h lamp on
press 2:60min, 1h lamp on
press 3:90min, 0.5h & 1h lamp on
press 4:120min, 2h lamp on
press 5:150min, 2h & 0.5h lamp on
1. Speed down button
2. Speed up button
3. Turn on button
4. Wind mode button
5. Timer button
6. Swing button
7. Turn off button
http://www.orion.ua
4
press 6:180min, 2h & 1h lamp on
press 7:210min, 2h, 1h & 0.5h lamp on
press 8:240min, 4h lamp on
press 9:270min, 4h & 0.5h lamp on
press 10:300min, 4h & 1h lamp on
press 11:330min, 4h, 1h & 0.5h lamp on
press 12:360min, 4h & 2h lamp on
press 13:390min, 4h,2h &0.5h lamp on
press 14:420min, 4h, 2h & 1h lamp on
press 15:450min. 4h, 2h, 1h & 0.5h lamp on
Control panel
MAINTENANCE AND STORING
1. Be sure to switch off the power supply and pull out the plug before cleaning.
2. This machine only needs common external cleaning and wiping.
3. Do not rub with gasoline, acid and alkali, in order to avoid fade and damage appearance.
4. When it is stored, it should be cooled and put in the box and in a dry, ventilation place.
SOLUTION TO SIMPLE FAILURE
When starting the fan, the fan blade doesn’t work. Please check whether the power plug has
really inserted into the socket or the cover has distorted, which has touched the fan blade. If the
noise comes when starting the fan, please check the unit as follows:
(1) Fan blade has been fight installed into the output shaft of motor.
(2) Groove on back of cover has matched the inserting groove on to the output shaft.
(3) There are tiny defective edge ring existing around the fan blade.
(4) The cover has distorted, which has touched the fan blade.
Power light indicators. LED display
Speed buttons +/-
Swing button
Mode button: Sleep, Normal, Nature
Timer button
On/Off button
http://www.orion.ua
5
TECHNICAL DATA
16’ oval oscillation stand fan
5 blades
8 speed settings
7,5 hours timer
3 kinds of wind
Remote controller
Adjustable height
Safe and reliable
Easy to install and disassemble
Voltage: AC230V~ 50Hz
Power: 55W
Color: dark gray with silver
Net/Gross weight: 5,4kgs/6,2kgs
Box size: 585х180х440mm
Extra information on ORION company web-site www.orion.ua
Indice
Altri manuali Orion Fan
