Osram 4920Z Manuale utente
4920Z
49*20w Matrix Zoom Moving Head
User manual
P
le
a
se
rea
d
t
he
ins
t
r
u
ction
s ca
refu
ll
y before use
2
TABLE OF CONTENTS
1.
S
af
ety
I
nst
r
uctions ......................................................................................3-
4
2. Technical Specifications
.......................................................................................... 5
3. Lux Date…………………………………………………………………..……….6
4. How To Control The Unit
......................................................................................7-9
5. DMX Channel List....................................................................................10-38
6. Shape.........................................................................................................................39
7
. Trouble shooting
..................................................................................................... 41
8
. Fixture Cleaning
...................................................................................................... 42
statement
The product has well capability and intact packing when leave factory. All of the
user should comply with warning item and manual, any misuse cause of the
damages are not included in our guarantee, and also can’t be responsible for
any malfunction & problem owing to ignore the manual.
3
1.
S
af
ety
I
nst
r
uctions
Please keep this User Guide for future consultation. If you sell the unit to another
user, be sure that they also receive this instruction booklet.
Unpack and check carefully there is no transportation damage before
using the unit.
Before operating, ensure that the voltage and frequency of power supply
match the power requirements of the unit.
It’s important to ground the yellow/green conductor to earth in order to avoid
electric shock.
The unit is for indoor use only. Use only in a dry location.
The unit must be installed in a location with adequate ventilation, at least 50
cm from adjacent surfaces. Be sure that no ventilation slots are blocked.
Disconnect main power before replacement or servicing.
Make sure there are no flammable materials close to the unit while
operating as it is fire hazard.
Use safety cable when fixes this unit. Do not handle the unit by taking its
head only, but always by taking its base.
Maximum ambient temperature is Ta: 40℃. Donot operate it where the
temperature is higher than this Unit surface temperature may reach up to
85℃. Donot touch the housing bare-hand during its operation. Turn off the
power and allow about 15 minutes for the unit to cool down before replacing
or serving.
the event of serious operating problem, stop using the unit immediately.
Never try to repair the unit by yourself. Repairs carried out by unskilled
people can lead to damage or malfunction. Please contact the nearest
authorized technical assistance center. Always use the same type spare
parts.
Do not touch any wire during operation as high voltage might be causing
electric shock.
4
Warning:
To prevent or reduce the risk of electrical shock or fire, do not expose the
unit to rain or moisture.
Do not open the unit within five minutes after switching off.
The housing, the lenses, or the ultraviolet filter must be replaced if they are
visibly damaged.
Caution:
There are no user serviceable parts inside the unit. Do not open the housing or
attempt any repairs yourself. In the unlikely event your unit may require
service, please contact your nearest dealer.
Installation:
The unit should be mounted via its screw holes on the bracket. Always ensure that
the unit is firmly fixed to avoid vibration and slipping while operating. And make
sure that the structure to which you are attaching the unit is secure and is able to
support a weight of 10 times of the unit’s weight. Also always use a safety cable
that can hold 12 times of the weight of the unit when installing the fixture.
The equipment must be fixed by professionals. And it must be fixed at a place
where is out of the touch of people.
5
2. Technical Specifications
Light Sources
49*20W 4IN1 RGBW LED
Beam Angle:4°- 46°
Power Consumption: 760W±5%,power factor PF≥0.95; standby power: 26W
Power Voltage: AC 100-240V, 50/60Hz
Dimension: 477mm×272mm×579.5mm
Net Weight:22.5 Kgs
Carton package 1in1 size: 60*60*46cm
Gross Weight: 27.2Kgs
Flight Case 1in2 size: 79*56*79cm
Gross Weight: 87.8Kgs
Control
DMX Channel:22/25/33/229/206 Channels
Control Modes: DMX512/mater-Slave/Auto Run/Music/Artnet
Pan/Tilt
Pan: 540°, Tilt: 360°
Pan/Tilt Resolution: 8/16 bit
Tilt infinite rotation; Using photoelectric reset system
Construction
Display:180° reversible 1.8 inch TFT colorful Display
Data In/Out socket: 3-pin & 5-pin XLR sockets
Power Socket: Power Con in/out
Protection Rating: IP20
Features
Full light domain dimming, 65536 levels of dimming accuracy;
Fast strobe 1~25Hz; preset various kinds of color macro function; preset
various
6
kinds of effect macro function
Led temperature protection & Speed of fan automatic adjustment based on the
temperature of the head.
Single led control, zoom effect, Tilt infinite rotation
3 LUX Date
7
200
4. How To Control The Unit
Display:
MENU To select the programming functions
DOWN To go backward in the selected functions
UP To go forward in the selected functions
ENTER To confirm the selected functions
Set DMX
Address Code
1 Press "Menu" to "Set DMX Address", and press "ENTER" keys to enter
into
2 Show "Set DMX Address DMX Address:001", Press the "UP and DOWN"
keys to amended
3Press "ENTER" keys to save and Exit, Press the "MENU" Keys does not
save and Exit
1.Pan Degree
1)540 °, 2)360°
Pan running angle
selection
2.Mic Sense
001 - 100
Sound sensitivity
adjustment
8
Menu
3.Language
English
Chinese
4.No Signal
1.Black Out 2.Hold
5.Fan Set
1.Auto 2. Low
3.High
6.ArtNet Set
ArtNet Enable：
1.ON 2.OFF
2.Universe:0---255
3.IP Mode：
A.2.X.X.X Auto
B.10.X.X.X Auto
C.Custom
4.Custom IP
192.168.000.001
5.SubNetMask
255.000.000.000
7.Reset
Yes
Reset
No
8.Default
Yes
Default
No
9.Adjust
Pass Word：up+down+up+down
1.Pan
0 - 255
2.Tilt
0 - 255
3.Focus
0 - 255
4.Red
0 - 255
5.Green
0 - 255
6.Blue
0 - 255
7.White
0 - 255
Address
Setting from 001 - 512
9
Reverse
Forward or
reversed setting
Pan
1.Yes
2.No
Tilt
1.Yes
2.No
Display
1.Yes
2.No
Information
1.CH
Value
Each channel show CH
value
2.Temp
____℃
Show the temperature of
led board
3.Soft
V.XXX
Show the version
number
4.IP
002.016.035.052
Default IP
5.Mask
255.000.000.000
Default submask
Channel
1.22Channels
Select channel mode
2.25Channels
3.33Channels
4.229Channels
5.206Channels
Mode
DMX 512
AUTO
SOUND
1.Pan:0--255
2.Pan Rotation：
0--255
10
Mode
Manual control
Manual control
3.Tilt:0--255
4.Tilt Rotation：
0--255
5.Focus:0--255
6.Red1：0--255
7.Greed1：0--255
8.Blue1：0--255
9.White1：0--255
10.Strobe1：0-255
11.Red2：0--255
12.Greed2：0--255
13.Blue2：0--255
14.White2：0--255
15.Strobe2：0-255
Alone/Master
1.Master
Alone/Master
2.Alone
Indice
Altri manuali Osram Attrezzatura di illuminazione
Osram
Osram Clay Paky ALPHA SPOT 300 Manuale utente
Osram
Osram Clay Paky ALPHA PROFILE 1500 Manuale utente
Osram
Osram ZELION HL300 Grow Light Manuale utente
Osram
Osram TRAXON Media Pixel Ribbon DMX Outdoor Flat Manuale di istruzioni per l'installazione
Osram
Osram LINEARlight FLEX Protect POWER Series Manuale utente
Osram
Osram AirZing PRO 5030 UNIV Guida utente
Osram
Osram PL-CN35-COB-600-XXX-24D-G2 Manuale utente
Osram
Osram AS 330 Manuale utente
Osram
Osram BY-P09 Manuale utente
Osram
Osram PermaLED® Area Light Medium Manuale utente
Osram
Osram Clay Paky ALPHA WASH 300 Manuale utente
Osram
Osram Claypaky MINI XTYLOS Manuale operativo
Osram
Osram Media Pixel Ribbon DMX Outdoor VB Manuale di istruzioni per l'installazione
Osram
Osram LEDIL204 Manuale utente
Osram
Osram LEDambient LEDINT203 Manuale utente
Osram
Osram Clay Paky STORMY Manuale utente
Osram
Osram BY-M46 Manuale utente
Osram
Osram KREIOS PAR Manuale utente
Osram
Osram KREIOS SL Manuale utente
Osram
Osram LEDinspect Manuale utente
