OTS ET2212Pp-S-DR Manuale utente

OT Systems Ltd. | www.ot-systems.com

Quick Installation Guide

ET2212Pp-S-DR/ version 2.3

Quick Installation Guide

ET2212Pp-S-DR

Description: Industrial Grade Unmanaged 2-port 10/100/1000Base-TX (PoE+) + 1000Base-FX SFP

Ethernet Switch

Overview: ET2212Pp-S-DR is a DIN rail type media converter that supports external SFP. It is a

industrial grade product whose operating temperature range is -10℃to 60℃. ET2212Pp-S-DR

supports 10/100/1000M Ethernet port and 1000M SFP port. The Ethernet port supports both half-

duplex and full-duplex mode. Users can use different type of SFP modules (single-mode/multi-mode

fiber, 1/2 core) as needed.

Package Content

⚫Unmanaged PoE Switch x 1

⚫Quick Start Guide x 1

⚫Din Rail mount bracket x 1

Read Before Install

◎Keep power off during installation

◎use Antistatic Wrist Strap correctly

◎Make sure using correct power supply, voltage must match

◎Make sure enough power supply from PSU that will not overload

◎Double check the wiring ( +/- ) is correct.

◎Keep installation dry and clean.

◎Do not open the chassis

OT Systems Ltd. | www.ot-systems.com

Quick Installation Guide

ET2212Pp-S-DR/ version 2.3

Switch Panel

ET2212Pp-S-DR Side panel: P1 and P2 are the number of connecting terminals, P+1 and P-1 are

respectively to the positive and negative poles to be connected; Earthing screw, used for earthing

equipment.

ET2212Pp-S-DR Front panel: The yellow light on the port is the LINK light, which is on when the

connection is established and the data transmission is flashing. The green light is PoE light, which is

only on when the switch port is supplying power to the PD devices. Power indicator light is on when

connecting with Power.

Interface Definition

10/100/1000Base-TX ethernet interface:

This series of switches provides MDI/MDI-X self-identification with cable support on all

10/100/1000Base-TX ports. In use, the Ethernet port of the switch can be connected with other

Ethernet terminal devices through network cables (direct or cross). Please use Class 5 shielded

twisted pair. The Ethernet port pin definition is shown in the following figure:

RJ45 port supports automatic MDI/MDI-X operation, you can use a straight line to connect to the PC

or server, connect to other switches or hubs. In the through line (MDI), pins 1, 2, 3, 4, 5, 6, 7, 8

correspond to the connection; For the MDI-X port of a switch or hub, cross lines are used: 1-3, 2-6, 3-

1, 6-2, 4-7, 5-8, 7-4, 8-5.1000Base-T (X) pins are defined as follows:

OT Systems Ltd. | www.ot-systems.com

Quick Installation Guide

ET2212Pp-S-DR/ version 2.3

Note: "Tx ±" refers to sent data ±, "Rx ±" refers to received data ±, and "-" refers to unused data.

LED Indicator

LED indicator

Status

Definition

Power

Red LED on

Power supplying in normal

Red LED off

Power supply abnormal or no powering

RJ45 indicator

Yellow LED on

Network connection in normal

Yellow LED flashing

Link communication in normal

Green LED on

PoE feeding in normal

Yellow/Green LED off

No connection at port

LINK

Green flashing

Optical work in normal

Installation caution

⚫Installation precautions

In order to avoid damage to equipment and personal injury caused by improper use, please

follow the following precautions:

a) In order to avoid damage caused by falling of the equipment, please put the equipment in

a stable environment.

b) When supplying power to the equipment, pay attention to confirm the range of power

supply voltage, as well as the positive and negative poles of the power supply, so as not to

damage the equipment by wrong operation.

c) In order to reduce the risk of electric shock, ensure that the equipment is well grounded in

the working environment.

d) No matter when, please do not arbitrarily remove the equipment shell.

When placing the switch, please avoid the area with dust and strong electromagnetic

interference

OT Systems Ltd. | www.ot-systems.com

Quick Installation Guide

ET2212Pp-S-DR/ version 2.3

⚫Din rail installation

The first step is to check the grounding and stability of the guide rail: the

guide rail slot of the switch is clamped into the guide rail; The second step:

from the center to both sides of the guide rail positioning screws in order.

Step 3: Use screws to fix the mounting rail card slot on the fixed guide groove

at both ends of the guide rail to ensure that the guide rail and the switch are

fixed on the guide rail vertically and stably.

⚫Grounding

Fix the grounding wire to the grounding screw above the switch, and ensure

good reliable connection of the grounding system.

⚫Power Connection

Insert the power cord into the specified position of the 6-core terminal, and insert the terminal

into the standard power supply inlet (P+1 and P-1 input corresponding to the first power supply

P1, and P+2 and P-2 input corresponding to the second power supply P2). The available voltage

standard of the power supply is supported from 48VDC to 57VDC.

General

To ensure trouble free transportation and storage, all OT Systems products must be thoroughly

inspected, tested and properly packed before delivery. Check the product upon receipt for any

visible damage which may have been caused during shipment.

-END-

Altri manuali OTS Interruttore

OTS

OTS ET8222PpH-S-DR Manuale utente

OTS

OTS ET8222PpH-S-DR Manuale utente

OTS

OTS IES82162MH-S-RP Manuale utente

OTS

OTS IES24242MPp-S Manuale utente

OTS

OTS ET4222PpH-S-DR Manuale utente

OTS

OTS ET4222Pp9H-S-DR Manuale utente

OTS

OTS ET4222Pp9H-S-DR Manuale utente

OTS

OTS IES8222MPp9H-S-DR Manuale utente

OTS

OTS IES24242MPpH-S Manuale utente

OTS

OTS ET4222PpH-S-DR Manuale utente

OTS

OTS ET4222Pp-S-DR Manuale utente

OTS

OTS ET4222Pp-S-DR Manuale utente

OTS

OTS IES8242MPp9H-S-DR Manuale utente

OTS

OTS ET2212PpH-S-DR Manuale utente

OTS

OTS IES8242MPpH-S-DR Manuale utente

OTS

OTS IES8242MPpH-S-DR Manuale utente

OTS

OTS IES82162XMH-S-RP Manuale utente

OTS

OTS IES16242MPp-S Manuale utente

OTS

OTS IES16242MPpH-S-DR Manuale utente

OTS

OTS IES8222MPpH-S-DR Manuale utente

OTS

OTS ET2212Pp-S-DR Manuale utente

OTS

OTS ET4111Pp Series Manuale utente

OTS

OTS EC10200Pp Manuale utente

OTS

OTS ET42202XM-S-PD Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente