Ovislink AirLive N.MINI Guida all'installazione
Q:
How to connect to Wireless ISP with N.MINI and sharing wireless signal to
other clients ?
A.
If your N.MINI’s firmware is prior to the version of v74.11.0.2.1e_b9 ,
then please upgrade the latest firmware version.
1.>Please switch the bar to client mode, connect your PC to N.MINI’s ethernet
port via a LAN cable, then connect the supplied power adapter and power
on the N.MINI.
2.> Ensure that your PC and N.MINI are on the same network segment
, say your PC’s IP is 192.168.1.100 subnet mask 255.255.255.0 .
3.>Open the browser and enter 192.168.1.253 to login the web management.
4.> Press the Basic Settings and select WISP mode from the pull list.
5.>Check the box to enable the Universal Repeater Mode , and enter with a
SSID . Then click the “Apply Changes” button to save the setting.
6.> Click “Reboot Later” button , then configure the WAN setting
7.>Click “WAN Interface” for WAN Interface Setup .
8.>Choose the WANAccess Type from the pull list depends on your ISP’s
internet access assign .
9.> Then click the “Apply Changes” button to save the setting.
10.>Click “Site Survey” to search your WISP’s AP
11.>Choose your WISP’s AP then click “Connect” button
12.>Then click “Reboot” to reboot the N.MINI.
13.>If N.MINI could not get public IP successfully, please check
whether the WAN settings and security settings are correct.
Altri manuali Ovislink Punto di accesso wireless
Ovislink
Ovislink evo-w54apV2 Manuale utente
Ovislink
Ovislink WL-8000AP Manuale utente
Ovislink
Ovislink AirLive WLA-5000AP Manuale di istruzioni
Ovislink
Ovislink Air Live WL-5470AP Manuale utente
Ovislink
Ovislink AirLive IGR-1500 Manuale utente
Ovislink
Ovislink WL-5420AP Manuale utente
Ovislink
Ovislink AirLive WH-9100MESH Manuale utente
Ovislink
Ovislink Air Live WL-5450AP Manuale utente
Ovislink
Ovislink AirLive N.TOP Manuale utente
Ovislink
Ovislink EVO-W54ARv2 Manuale utente
