Pacific hydrostar 95618 Manuale di installazione

6 HP Gas Pressure Washer

Model

95618

SET UP AND OPERATING INSTRUCTIONS

Diagrams within this manual may not be drawn proportionally.

Due to continuing improvements, actual product may differ slightly from the product described herein.

Distributed exclusively by Harbor Freight Tools®.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

manual or any artwork contained herein may be reproduced in any shape or form

without the express written consent of Harbor Freight Tools.

For technical questions or replacement parts, please call 1-800-444-3353.

SKU 95618 For technical questions please call 1-800-444-3353 Page 2

Specications

Gas Engine 6HP OHV Mitsubishi Engine, 3600 RPM, Recoil Start, Uses Unleaded Fuel,

20 Oz. Engine Oil Capacity, 8.3 Gal. Fuel Capacity (3.8L).

Environmental Approved by EPA (Environmental Protection Agency)

Approved by CARB (California Air Resources Board)

Pressure Washer 2800 PSI Rated, Cast Iron Cylinder Sleeve, Brass Axial Pump

Pump Dimensions 23-5/8”L x 19-½”W x 36-¾”T

Washer Gun Safety Trigger Activated; for cold water use only.

Water Output 2.5 Gallons per Minute

High Pressure Hose 27 Foot Long High Pressure Hose

Cart and Wheels Built in Cart with 8”D x 2” Wheels

Features Standard Garden Hose Connector for Water Supply

Thermal Overload Protection and Unloader Valve on Pressure Washer

Save This Manual

You will need the manual for the safety warnings and precautions, assembly in-

structions, operating and maintenance procedures, parts list and diagram. Keep

your invoice with this manual. Write the invoice number on the inside of the front

cover. Keep the manual and invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using tool, basic safety precautions should always be fol-

lowed to reduce the risk of personal injury and damage to equipment. Read

and adhere to all warnings and safety precautions before use.

Read all instructions before using this tool!

1. Carbon Monoxide Hazard. Operate pressure washer in well

ventilated area only. Carbon Monoxide is created when engine is

running and is a DEADLY gas when inhaled. Carbon Monoxide is a

colorless, odorless gas. Early signs of Carbon Monoxide poisoning

resemble Flu symptoms such as headache, dizziness or nausea. If you

notice these signs, turn off engine and immediately move to a well ventilated

area.

2. Fire Hazard. Do not ll gas tank when engine is running or hot. Do

not operate engine near spilled gasoline. Clean spilled gasoline

before starting engine. Do not store or handle gasoline near pilot

light, electrical equipment or open ame. Do not smoke near

gasoline. Gasoline fuel and fumes are ammable and potentially

explosive. Use proper fuel handling procedures. Always have multiple ABC

class re extinguishers in the area when handling fuel.

REV 07c

SKU 95618 For technical questions please call 1-800-444-3353 Page 3

3. Injection Hazard. The high pressure water jet produced by this tool

can cut skin or cause injury to hands or eyes. Do not allow spray to

strike you and do not spray toward people or animals. Do not spray

the tool itself or any electrical source.

4. Burn Hazard. The engine and high pressure pump become hot

during operation. Do not touch the engine or pump until they have

cooled down after use.

Keep work area clean5. . Cluttered areas invite injuries.

Observe work area conditions6. . Do not use machines or power tools in

unsafe locations. Don’t expose to rain. Keep work area well lit.

Keep children away7. . Children must never be allowed in the work area. Do

not let them handle machines, tools, gasoline or oil.

Store idle equipment8. . When not in use, tools must be stored in a dry loca-

tion to inhibit rust. Always lock up tools and keep out of reach of children.

Use the right tool for the job9. . Do not attempt to force a small tool or attach-

ment to do the work of a larger industrial tool. There are certain applications

for which this tool was designed. It will do the job better and more safely at

the rate for which it was intended. Do not modify this tool and do not use this

tool for a purpose for which it was not intended.

Dress properly10. . Do not wear loose clothing or jewelry as they can be

caught in moving parts. Protective, electrically non-conductive clothes and

non-skid footwear are recommended when working. Wear restrictive hair

covering to contain long hair.

Use eye and ear protection11. . Always wear ANSI approved impact safety

goggles, heavy rubber boots, work gloves and hearing protection during use.

During pressure washing debris can y back in your face, or into other prop-

erty, people or animals. Use extreme caution to prevent unintended spray

injury.

Do not overreach12. . Keep proper footing and balance at all times. Do not

reach over or across running machines.

Maintain tools with care13. . Keep tools maintained and clean for better and

safer performance. Follow instructions for lubricating and changing accesso-

ries. Inspect tool hoses periodically and, if damaged, have them repaired by

an qualied technician. The handles must be kept clean, dry, and free from

oil and grease at all times.

Turn OFF power14. . Turn OFF engine and water supply when not in use.

SKU 95618 For technical questions please call 1-800-444-3353 Page 4

Remove adjusting keys and wrenches15. . Check that keys and adjusting

wrenches are removed from the tool or machine work surface before turning

engine on.

Avoid unintentional starting16. . Be sure the water supply is in the Off posi-

tion when not in use. Do not carry the spray handle with your nger on the

trigger, whether or not engine is operating.

Stay alert17. . Watch what you are doing, use common sense. Do not operate

any tool when you are tired.

Take caution as some woods contain preservatives such as copper18.

chromium arsenate (CCA) which can be toxic. When high pressure

spraying extra care should be taken to avoid inhalation and minimize skin

contact.

Check for damaged parts19. . Before using any tool, any part that appears

damaged should be carefully checked to determine that it will operate prop-

erly and perform its intended function. Check for alignment and binding of

moving parts; any broken parts or mounting xtures; and any other condition

that may affect proper operation. Any part that is damaged should be prop-

erly repaired or replaced by a qualied technician. Do not use the tool if any

switch does not turn On and Off properly.

Guard against electric shock20. . Prevent water spray into any electrical

source such as a power outlet or extension cord.

Replacement parts and accessories21. . When servicing, use only identical

replacement parts. Use of any other parts will void the warranty. Only use

accessories intended for use with this tool. Approved accessories are avail-

able from Harbor Freight Tools.

Do not operate tool if under the inuence of alcohol or drugs22. . Read

warning labels on prescriptions to determine if your judgment or reexes are

impaired while taking drugs. If there is any doubt, do not operate the tool.

Maintenance23. . For your safety, service and maintenance should be per-

formed regularly by a qualied technician.

Use only Cold Water and/or pressure washer detergent as the active24.

propellant in this tool. Do not use detergents not designed for pressure

washers, caustic materials, solvents or any ammable materials in this

machine. Use of any such material can cause injury, or damage this tool or

personal property.

During use, do not allow the high pressure hose to come in contact25.

with any hot part of the engine or pump. Damage to the hose may occur

possibly causing the hose to burst or leak under high pressure.

SKU 95618 For technical questions please call 1-800-444-3353 Page 5

In case of emergency during use, immediately release the trigger on26.

the spray handle, then turn the engine off. Do not set the spray handle

down without turning off the engine. Then shut off gas supply to engine. (Re-

fer to engine manufacturer’s manual for fuel shut off procedures.)

Avoid tipping over the pressure washer.27. Only use on a level solid and

stable surface.

Never leave the engine running for more than 3 minutes without spraying.28.

Do not leave the pressure washer unattended while the engine is running.

Use tools with both hands when required.29. This tool requires the use of two

hands to maintain tool stability and keeps hands away from operating parts

of the tool.

People with pacemakers should consult their physician(s) before use.30.

Electromagnetic elds in close proximity to heart pacemaker could cause

pacemaker interference or pacemaker failure. Caution is necessary when

near engine’s magneto or recoil starter.

Never touch the water jet.31. Never touch the water jet or point it at people or

animals. Injury may result.

Clean up fuel spills immediately.32. Dispose of uids and cleaning materi-

als in accordance with local, state or federal regulations. Store oily rags in a

metal container. Store gasoline in a well ventilated, secure locker.

Do not smoke and do not allow re ame or electrical ignition sources 33.

near the pressure washer or any fuel or ammable materials.

Keep grounded electrically conductive tools and appliances away from34.

any source of ammable materials. Electrical items can cause ignition of

ammable fumes and materials.

Do not rell the fuel tank on the pressure washer while the engine is 35.

running or hot. Do not operate the pressure washer if there are any leaks in

the fuel system.

Use only the types and grades of fuel, oil and other lubricants recom-36.

mended by the engine manufacturer.

WARNING:37. The brass components of this product contain lead, a chemical

known to the State of California to cause birth defects or other reproductive

harm. (California Health and Safety Code § 25249.5, et. seq.)

The warnings, cautions, and instructions discussed in this instruction manual38.

cannot cover all possible conditions and situations that may occur. It must

be understood by the operator that common sense and caution are factors

which cannot be built into this product, but must be supplied by the operator.

SKU 95618 For technical questions please call 1-800-444-3353 Page 6

Unpacking

When unpacking, check to make sure the parts shown in the photo below and in

the diagrams on pages 13 and 14 are included.

If any parts are missing or broken, please call Harbor Freight Tools at the number

on the cover of this manual.

REV 07d, 08a

SKU 95618 For technical questions please call 1-800-444-3353 Page 7

Checking Pump’s Oil Level

The Oil pump is lled with 80 ml of SAE 75W/90 oil at the factory. Under 1.

normal conditions there is no reason to add any oil or change the oil. It is

however recommended that the customer verify the pump’s oil level before

the initial use.

Remove the temporary white plastic Oil Plug by turning it counterclockwise.2.

Use a measuring device, like a thin wooden stick (not included), as a

dipstick. Place the stick all the way in until it touches the bottom of the

Pump’s Oil reservoir. See Figure A below.

Remove the stick and measure the amount of oil at the end of the stick.3.

There should be about one inch of oil covering the end of the stick as shown

in Figure B. Add SAE 75W/90 oil if needed.

Do not put the same oil plug into the High Pressure Pump (24). There4.

is a yellow plastic oil plug (included) that has a small breather hole in it.

That breather plug must be used whenever the Pressure Washer is used.

The white plastic plug (without the breather hole) should be used when

transporting only.

1 Inch

Figure B

Figure A

High Pressure

Pump (24)

REV 08a

measuring stick

SKU 95618 For technical questions please call 1-800-444-3353 Page 8

Assembly

Note: Please refer to the photo above and the table and diagram on pages 13

and 14 when reading this section and assembling your pressure washer.

1. Attach the Cart Handle (16) to the Cart Frame (5) as shown in the photo

below. Secure in place using the Handle Locking Knobs (23) with Flat

Washers (21) and Spring Washers (22). Tighten Securely.

2. Attach the Wheels (4) to the Cart Frame (5) using the Lock Nuts (2) and Flat

Washers (3). Press Wheel Covers (1) in place to cover axle ends.

3. Connect the High Pressure Hose (44) to the High Pressure Pump (24) by

screwing in place clockwise. Secure tightly.

4. Attach High Pressure Hose (44) to Spray Gun Handle (43) by screwing

clockwise. Tighten securely.

5. Coil the High Pressure Hose (44) and hang it on the Hose Bracket (8). Hang

the Spray Gun on the Gun Bracket (14).

6. Connect a garden hose water supply to the garden hose connector.

07d

SKU 95618 For technical questions please call 1-800-444-3353 Page 9

Using Detergent

CAUTION! To avoid injury, ONLY run pressure washer detergent through the

Detergent Suction Hose (46).

Figure A

1. Press the supplied Detergent Suction Hose (46) onto the tting on top of the

pump. Place the other end of the hose into the detergent container or bottle.

See Figure C.

High pressure Low pressure

Figure D

2. Do not dilute the detergent. The detergent sprays out at low pressure only.

Slide the Spray Nozzle out for low pressure. The pressure washer will draw

the detergent up through the Detergent Suction Hose (46) and mix the water

and detergent automatically, at about a 6% detergent 94% water ratio.

See Figure D.

07d

Figure C

SKU 95618 For technical questions please call 1-800-444-3353

Page 10

Important Guidelines for Water Supply

1. Do not leave engine running without spraying water. If engine is left

running for more than three (3) minutes without discharging water, excess

pressure can cause damage to the pump seals and / or high pressure hose.

2. The water supply provided through the garden hose must be at least

3 gallons per minute for this pressure washer to operate at maximum

level. Use only a standard 3/4” diameter garden hose for water supply,

smaller hoses may not provide enough water ow. Test your water supply

before operation by measuring the time required to ll a gallon bucket.

3. Only use clean water supply. Dirty or recycled “grey” water may contain

impurities which can damage the pump or seals. Never use corrosive or

ammable uids.

Engine Setup

Refer to the engine manufacturer’s manual for complete directions on proper

engine setup, operation and maintenance.

Before starting the engine check the engine oil level. Unscrew the Oil Cap,1.

and read the oil level on the dipstick (which is attached to the underside of

the Oil Cap). If the level is low, ll to the proper level before starting. Use

only clean, high quality engine oil meeting the engine manufacturer’s speci-

cations.

Gas Cap

Fuel Tank

Oil Cap

2. Remove Gas Cap and ll the Fuel Tank with unleaded gasoline. Do not over-

ll. Be careful not to spill gasoline. Clean any spills before starting engine.

Indice

Altri manuali Pacific hydrostar Idropulitrice

Pacific hydrostar

Pacific hydrostar 65078 Manuale utente

Pacific hydrostar

Pacific hydrostar 95619 Manuale utente

Pacific hydrostar

Pacific hydrostar Pacific Hydrostar 212cc Gasoline Powered Clear Water... Istruzioni per il montaggio

Pacific hydrostar

Pacific hydrostar 97552 Guida utente

Pacific hydrostar

Pacific hydrostar 94201 Manuale di installazione

Pacific hydrostar

Pacific hydrostar 98444 Guida utente

Pacific hydrostar

Pacific hydrostar 95338 Manuale utente

Pacific hydrostar

Pacific hydrostar 98439 Guida utente

Pacific hydrostar

Pacific hydrostar PACIFIC HYDROSTRAR 97005 Manuale di installazione

Pacific hydrostar

Pacific hydrostar 97553 Guida utente

Pacific hydrostar

Pacific hydrostar 95672 Manuale di installazione

Pacific hydrostar

Pacific hydrostar 69488 Manuale utente

Pacific hydrostar

Pacific hydrostar 99741 Manuale di installazione

Pacific hydrostar

Pacific hydrostar 68333 Manuale utente

Pacific hydrostar

Pacific hydrostar 69488 Manuale utente

Pacific hydrostar

Pacific hydrostar 95156 Manuale utente

Pacific hydrostar

Pacific hydrostar 1650 PSI Manuale di istruzioni originale

Manuali Idropulitrice popolari di altre marche

Shark

Shark RG-232637 Manuale utente

Shakti Technology

Shakti Technology S3 Manuale utente

Kärcher

Kärcher K 4 Pure Manuale utente

Porter-Cable

Porter-Cable D25806-025-2 Manuale utente

REM POWER

REM POWER HDEm 662 Manuale utente

Landa

Landa HS-3000 Manuale utente

Craftsman

Craftsman 580.752270 Manuale utente

HIKOKI

HIKOKI AW 100 Manuale utente

Delco

Delco DC 1302 Manuale utente

Kärcher

Kärcher K 3 Full Control Manuale utente

BIEMMEDUE

BIEMMEDUE 120/10 - 170/13 Manuale utente

ARKSEN

ARKSEN 014-HG-14141-HR Manuale utente

Black & Decker

Black & Decker PW1700SPX Manuale utente

Kärcher

Kärcher 595 - SPARE Guida

Kranzle

Kranzle B 10 200 Manuale utente

Stihl

Stihl RE 90 Manuale utente

Husky

Husky HU80911 Manuale utente

PowR-Quip

PowR-Quip PQ-2600 Manuale utente