Pakedge C36 Manuale utente

pakedgedevice&software inc

QUICK START GUIDE

C36

Enterprise-Class, Fully Managed, Wireless Access Point Controller

Version 1.0

Contents

Quick Controller Overview .........................................................................................................................................3

Preparing to Install the Controller..............................................................................................................................3

Configuring the Controller..........................................................................................................................................4

Changing the IP Address of the Controller .................................................................................................................5

The Wizard..................................................................................................................................................................6

Guest Network............................................................................................................................................................8

Access Point Overview................................................................................................................................................8

Quick Controller Overview

The front panel of the C36 has a pair of blue LEDs. See the Table 1 below for more information.

Label

Function

Description

HDD

Hard Drive Activity

When lit, the hard drive is in use

PWR

Power indicator light

When lit, indicates that the unit has power

Table 1: LED Explanation

The rear panel is where the physical cabling (power, ethernet, console) is located. Table 2 describes each port

and its function.

Name

Description

AC Connector

AC110～260V

Power Switch

Switch to power the C36 on or off

USB 1 / 2

Maintenance

LAN

MDI/MDIX RJ45 Interface for connection to the LAN

HDMI

HDMI Display out for Maintenance

Console

Local management, Speed 115200bps, RJ45 interface

Table 2: C36 Rear Panel Port Description

Preparing to Install the Controller

Installing the C36 is similar to installing a network switch. If you have installed a managed switch before, the

process will be very similar.

Tools required:

oPhilips Screwdriver (if using rack-mount brackets).

oPC or Laptop with ehternet interface and a web browser (an integrated DB-9 port or USB-To-

Serial adapter may be necessary if you would like to use the console interface).

oEthernet Cable.

Installation

1. Open the box and remove the unit.

2. If mounting the controller in a standard 19” AV rack, attach the rack-mounting brackets that

come with the C36 to the sides. If not rack-mounting, ensure that the controller is physically

mounted near power and network connections (i.e, backbone switch or firewall/router).

3. Connect power to the device.

4. Connect an ethernet cable from your computer to the LAN port on the C36.

5. You are now ready to configure the controller to an IP address that matches your network.

Configuring the Controller

1. Connect the controller to power and push the power switch on the rear panel. The PWR LED will

light up and the fans will start.

2. Connect a PC or laptop to the LAN port on the C36 rear panel.

3. Configure the PC with a static IP address of 192.168.1.10 and subnet mask of 255.255.255.0 and

then open any browser (Mozilla Firefox is prefered).

4. In the browser, enter the controller’s default IP address of 192.168.1.236 into the Address Bar

and press <ENTER>.

5. A web page will appear prompting you for a username and password (Figure 1). Enter pakedge

for the username and pakedgec for the password. Then click “Login” to log into the web

administration portal.

6. Once you have logged into the controller, you will see the Dashboard (Figure 2).

Figure 1: Login Web Interface

Figure 2: C36 Web Interface

Changing the IP Address of the Controller

1. From the menu on the left, under Settings, select Macrocell Controller. In the upper right of the

page select LAN Settings (Figure 3).

2. IP: Enter the IP address you want the C36 to have to consistent with your network scheme.

3. Netmask: Enter the subnet mask that matches your network scheme

4. Gateway: Enter the IP address of the router.

5. Hostname: You cannot edit the hostname.

6. When you have the settings you would like, click “Save”.

Figure 3: LAN Settings

Now that your C36 has the correct IP information and matches your network’s scheme, you are ready to connect

it to either a switch or directly to the router and setup the wireless system.

The Wizard

The Wizard will discover, manage and configure your access points (APs), making it a quick and easy tool to get

your wireless network up and running.

Step 1: Firmware

1. Before being able to manage or configure the AP(s), they must all be on the same firmware version.

If there is any inconsistency in the firmware version, the C36 will notify you (Figure 4).

Figure 4: Firmware out of date

2. Click “Ok” and you will be directed to the AP-Firmware update page (Figure 5).

3. The icon - indicates which APs have an older firmware as well as the firmware they should be

updated to. Select the highlighted APs and click on Update AP Firmware. Once the process is

complete, all your APs should display - .

Figure 5: AP-Firmware update page

4. Click “Next” to continue to Step 2

Step 2: Discover and Manage AP(s)

1. Once the firmware is updated on all access points, the Wizard will continue.

2. The C36 will scan your network and discover any compatible access points. Click Next to

continue.

3. The C36 will detect the network’s DHCP server, which is usually a router. Click Next to

continue.

Step 3: Global Configuration

In this step you will configure up to 4 SSIDs as well as an optional Guest Network.

Enable: Allows you to Enable/Disable an SSID

SSID: Enter the SSID name

Suppressed SSID: When this is set to “On”, the SSID will be active, but you will not see it

broadcasting and you’ll need to manually enter the SSID name in order to join it.

Station Separation: When this is set to “On”, devices connected to the same SSID cannot

see/ping or communicate with each other

Security: Choose the best security that fits your network needs (Recommended WPA2-

PSK)

Passphrase: Enter your wireless password

Enable 802.1q tag: Only Enable when you have a router capable of doing VLANs. When

you set it to “On” you will be given the option to choose which VLAN to tag it to.

Once you are done setting up the SSID(s), click “Save”. You can choose “Save and Continue” if you still

need to setup the Guest Network or make any changes under the Advanced tab, or “Save and Apply” to

write the setup to the access points (Figure 7).

Figure 7: Apply Now

Guest Network

The Guest Network is designed for routers that do NOT support VLANs. The Guest Network acts as its

own network with no communication whatsoever with the other SSIDs. Enabling and setting the security

settings are the same as the other 4 SSIDs. The Guest Network IP Setup section allows you to input the IP

address used for the Guest Network. You can think of the Guest Network as the AP being its own router with its

own IP address that is by default 192.168.200.1. You will also need to provide the DHCP range. The Default

Gateway and the Primary DNS must be the IP address of your router. Click “Save”when done and “Save and

Apply” to apply the configuration to the APs.

Access Point Overview

After saving and applying the global configuration, you will be directed to the Access Point Overview

page (Figure 8). On this page you will see the status of the access points and as the configuration is being applied

and the units are rebooting, you will see a small timer displaying how long it will take before the APs become

ready. When the timer expires, all the APs should say “Online” and you will get a message saying that the C36

has been configured and is ready for use.

Figure 8: Access Point Overview Page

NOTE: For more detailed instructions and explanation of the options under the C36 GUI, refer to the C36 Users

Manual

pakedgedevice&software inc.

1163 Triton Drive

Foster City, CA 94404

Visit us at: www.pakedge.com

Indice

Altri manuali Pakedge Punto di accesso wireless

Pakedge

Pakedge WA-2200 Series Manuale utente

Pakedge

Pakedge WA-2200-0-1 Manuale utente

Pakedge

Pakedge W6x Manuale utente

Pakedge

Pakedge WAP-O3G Manuale utente

Pakedge

Pakedge WA-2200-C Manuale utente

Pakedge

Pakedge WA-2200-O Manuale utente

Pakedge

Pakedge WK Series Manuale utente

Pakedge

Pakedge WAP-C3N Manuale utente

Pakedge

Pakedge WX-1 Manuale utente

Pakedge

Pakedge NK-1 Manuale utente

Pakedge

Pakedge WX-1-O Manuale utente

Pakedge

Pakedge WA Series Guida di riferimento rapido

Pakedge

Pakedge WA-4200 Manuale utente

Pakedge

Pakedge WX-1-O Manuale utente

Pakedge

Pakedge WA-2200-1 Manuale utente

Pakedge

Pakedge WK-1-O Manuale utente

Pakedge

Pakedge WA-4200-C Manuale utente

Pakedge

Pakedge WA-4200 Manuale utente

Pakedge

Pakedge WX-1 Manuale utente

Pakedge

Pakedge WK-1 Manuale utente

Pakedge

Pakedge WX-1-O Manuale utente

Pakedge

Pakedge WA-2200 Series Manuale utente

Pakedge

Pakedge WA-2200 Series Manuale utente

Pakedge

Pakedge WA-2200-C-1 Manuale utente

Manuali Punto di accesso wireless popolari di altre marche

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuale utente

Ubiquiti

Ubiquiti NanoStation NSM2 Manuale utente

Cisco

Cisco Aironet 1550 Series Manuale utente

Aruba

Aruba IAP-335 Manuale utente

Advantek Networks

Advantek Networks AWN-AP-54MR Manuale utente

IP-COM

IP-COM AP355 Manuale utente

Buffalo

Buffalo AirStation WLA-L11G Manuale utente

EnGenius

EnGenius EnStationACv2 Manuale utente

D-Link

D-Link DAP-3662 Manuale utente

xG Technology

xG Technology xMax CN1300 Manuale utente

Widelink

Widelink ezWave WAP-1100 Series Manuale utente

Edimax

Edimax CAP1200 Manuale utente

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuale utente

Aruba

Aruba AP-203R Manuale utente

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuale utente

CreatComm

CreatComm TB5F Manuale utente

SineDigital

SineDigital MW-1500AP(H) Manuale utente

TP-Link

TP-Link AP9650 V1 Manuale utente