PaloAlto Networks M-200 Guida all'applicazione

M-200 and M-600 Appliance

Hardware Reference

docs.paloaltonetworks.com

Contact Informaon

Corporate Headquarters:

Palo Alto Networks

3000 Tannery Way

Santa Clara, CA 95054

www.paloaltonetworks.com/company/contact-support.html

About the Documentaon

• For the most recent version of this guide or for access to related documentaon, visit the

Technical Documentaon portal docs.paloaltonetworks.com.

• To search for a speciﬁc topic, go to our search page docs.paloaltonetworks.com/search.html.

• Have feedback or quesons for us? Leave a comment on any page in the portal, or write to us

at documenta[email protected]om.

Palo Alto Networks, Inc.

www.paloaltonetworks.com

Alto Networks. A list of our trademarks can be found at www.paloaltonetworks.com/company/

trademarks.html. All other marks menoned herein may be trademarks of their respecve

companies.

Last Revised

August 2, 2018

Table of Contents

Before You Begin................................................................................................5

Upgrade/Downgrade Consideraons for Firewalls and Appliances................................ 6

Tamper Proof Statement............................................................................................................ 7

Third-Party Component Support............................................................................................. 8

Product Safety Warnings........................................................................................................... 9

M-200 and M-600 Appliance Overview....................................................13

M-200 Appliance Front Panel................................................................................................14

M-200 Appliance Back Panel.................................................................................................16

M-600 Appliance Front Panel................................................................................................18

M-600 Appliance Back Panel.................................................................................................20

M-200 and M-600 Appliance Port LEDs............................................................................ 23

Install M-200 or M-600 Appliance in an Equipment Rack.....................25

Install the M-200 Appliance in a 19” Equipment Rack.................................................... 26

Install the M-600 Appliance in a 19” Equipment Rack.................................................... 29

Connect Power to an M-200 or M-600 Appliance..................................33

Connect AC Power to an M-200 or M-600 Appliance....................................................34

Service an M-200 or M-600 Appliance......................................................35

Replace an M-200 or M-600 Drive......................................................................................36

Replace an M-200 or M-600 Appliance System Drive.........................................36

Replace an M-200 or M-600 Appliance Log Drive................................................38

Replace an M-200 or M-600 Appliance Power Supply................................................... 42

M-200 and M-600 Appliance Speciﬁcaons............................................ 43

M-200 and M-600 Physical Speciﬁcaons......................................................................... 44

M-200 and M-600 Electrical Speciﬁcaons....................................................................... 45

M-200 and M-600 Environmental Speciﬁcaons............................................................. 46

M-200 and M-600 Miscellaneous Speciﬁcaons..............................................................47

M-200 and M-600 Appliance Hardware Compliance Statements....... 49

M-200 and M-600 Compliance Statements.......................................................................50

Table of Contents

Before You Begin

Read the following topics before you install or service a Palo Alto Networks® next-

generaon ﬁrewall or appliance. The following topics apply to all Palo Alto Networks

ﬁrewalls and appliances except where noted.

>Upgrade/Downgrade Consideraons for Firewalls and Appliances

>Tamper Proof Statement

>Third-Party Component Support

>Product Safety Warnings

Before You Begin

Upgrade/Downgrade Consideraons for Firewalls and

Appliances

The following table lists hardware features that have upgrade or downgrade impact. Make sure

you understand all upgrade/downgrade consideraons before you upgrade or downgrade from

the speciﬁed version of PAN-OS.

Feature Release Upgrade Consideraons Downgrade

Consideraons

PA-7000 Log

Forwarding Card (LFC)

10.0 If you are using an LFC

with a PA-7000 Series

Firewall, when you

upgrade to PAN-OS

10.0, you must conﬁgure

the management plane

or dataplane interface

for the service route

because the LFC ports

do not support the

requirements for the

service route. We

recommend using the

dataplane interface for

the Data Services service

route.

n/a

Upgrading a PA-7000

Series Firewall with a

ﬁrst generaon switch

management card

(PA-7050-SMC or

PA-7080-SMC)

PAN-OS 8.0

and later

Before upgrading

the ﬁrewall, run the

following CLI command

to check the ﬂash drive’s

status: debug system

disk-smart-info

disk-1.

If the value for

aribute ID #232,

Available_Reservd_Space

0x0000, is greater than

20, then proceed with

the upgrade. If the value

is less than 20, then

contact support for

assistance.

Before downgrading

the ﬁrewall, run the

following CLI command

to check the ﬂash drive’s

status: debug system

disk-smart-info

disk-1.

If the value for

aribute ID #232,

Available_Reservd_Space

0x0000, is greater than

20, then proceed with

the downgrade. If the

value is less than 20,

then contact support for

assistance.

Before You Begin

Tamper Proof Statement

To ensure that products purchased from Palo Alto Networks were not tampered with during

shipping, verify the following upon receipt of each product:

• The tracking number provided to you electronically when ordering the product matches the

tracking number that is physically labeled on the box or crate.

• The integrity of the tamper-proof tape used to seal the box or crate is not compromised.

• The integrity of the warranty label on the ﬁrewall or appliance is not compromised.

(PA-7000 Series ﬁrewalls only) PA-7000 Series ﬁrewalls are modular systems and

therefore do not include a warranty label on the ﬁrewall.

Before You Begin

Third-Party Component Support

Before you consider installing third-party hardware, read the Palo Alto Networks Third-Party

Component Support statement.

Before You Begin

Product Safety Warnings

To avoid personal injury or death for yourself and others and to avoid damage to your Palo Alto

Networks hardware, be sure you understand and prepare for the following warnings before you

install or service the hardware. You will also see warning messages throughout the hardware

reference where potenal hazards exist.

All Palo Alto Networks products with laser-based opcal interfaces comply with 21 CFR

1040.10 and 1040.11.

The following safety warnings apply to all Palo Alto Networks ﬁrewalls and appliances, unless a

speciﬁc hardware model is speciﬁed.

• When installing or servicing a Palo Alto Networks ﬁrewall or appliance hardware component

that has exposed circuits, ensure that you wear an electrostac discharge (ESD) strap. Before

handling the component, make sure the metal contact on the wrist strap is touching your skin

and that the other end of the strap is connected to earth ground.

French Translaon: Lorsque vous installez ou que vous intervenez sur un composant matériel

de pare-feu ou de disposif Palo Alto Networks qui présente des circuits exposés, veillez

à porter un bracelet anstaque. Avant de manipuler le composant, vériﬁez que le contact

métallique du bracelet anstaque est en contact avec votre peau et que l’autre extrémité du

bracelet est raccordée à la terre.

• Use grounded and shielded Ethernet cables to ensure agency compliance with electromagnec

compliance (EMC) regulaons.

French Translaon: Des câbles Ethernet blindés reliés à la terre doivent être ulisés pour

garanr la conformité de l'organisme aux émissions électromagnéques (CEM).

• (PA-3200, PA-5200, PA-5400, PA-7050, and PA-7080 ﬁrewalls only) At least two people are

recommended for unpacking, handling, and relocang the heavier ﬁrewalls.

• Do not connect a supply voltage that exceeds the input range of the ﬁrewall or appliance. For

details on the electrical range, refer to electrical speciﬁcaons in the hardware reference for

your ﬁrewall or appliance.

French Translaon: Veillez à ce que la tension d’alimentaon ne dépasse pas la plage d’entrée

du pare-feu ou du disposif. Pour plus d’informaons sur la mesure électrique, consulter la

rubrique des caractérisques électriques dans la documentaon de votre matériel de pare-feu

ou votre disposif.

• Do not replace a baery with an incorrect baery type; doing so can cause the replacement

baery to explode. Dispose of used baeries according to local regulaons.

French Translaon: Ne remplacez pas la baerie par une baerie de type non adapté, cee

dernière risquerait d’exploser. Meez au rebut les baeries usagées conformément aux

instrucons.

• I/O ports are intended for intra-building connecons only and not intended for OSP (Outside

Plant) connecons or any network connecons subject to external voltage surge events.

Before You Begin

•(All Palo Alto Networks appliances with two or more

power supplies)

Cauon: Shock hazard

Disconnect all power cords (AC or DC) from the power

inputs to fully de-energize the hardware.

French Translaon: (Tous les appareils Palo Alto

Networks avec au moins deux sources d’alimentaon)

Débranchez tous les cordons d’alimentaon (c.a. ou

c.c.) des entrées d’alimentaon et meez le matériel

hors tension.

•(PA-7000 Series ﬁrewalls only)

Cauon: High touch current

Connect to earth before connecng to the power

supply.

Ensure that the protecve earthing conductor is

connected to the provided ground lug on the rear side

of the ﬁrewall.

•(PA-7000 Series ﬁrewalls only) When removing a fan

tray from a PA-7000 Series ﬁrewall, ﬁrst pull the fan

tray out about 1 inch (2.5cm) and then wait a minimum

of 10 seconds before extracng the enre fan tray.

This allows the fans to stop spinning and helps you

avoid serious injury when removing the fan tray. You

can replace a fan tray while the ﬁrewall is powered

on but you must replace it within 45 seconds and you

can only replace one fan tray at a me to prevent the

thermal protecon circuit from shung down the

ﬁrewall.

French Translaon: (Pare-feu PA-7000 uniquement)

Lors du retrait d’un roir de venlaon d’un pare-

feu PA-7000, rerez tout d’abord le roir sur 2,5 cm,

puis paentez au moins 10 secondes avant de rerer

complètement le roir de venlaon. Cela permet aux

venlateurs d’arrêter de tourner et permet d’éviter des

blessures graves lors du retrait du roir. Vous pouvez

remplacer un roir de venlaon lors de la mise sous

tension du pare-feu. Toutefois, vous devez le faire dans

les 45 secondes et vous ne pouvez remplacer qu’un

roir à la fois, sinon le circuit de protecon thermique

arrêtera le pare-feu.

Altri manuali per M-200

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali PaloAlto Networks Hardware di rete

PaloAlto Networks

PaloAlto Networks PA-400 Series Manuale utente

PaloAlto Networks

PaloAlto Networks PA-7500 Guida all'applicazione

PaloAlto Networks

PaloAlto Networks ION 1200-S Guida all'applicazione

PaloAlto Networks

PaloAlto Networks ION 1200-C-NA/ROW Manuale utente

PaloAlto Networks

PaloAlto Networks ION 1000 Guida all'applicazione

PaloAlto Networks

PaloAlto Networks PA-400 Series Guida all'applicazione

PaloAlto Networks

PaloAlto Networks PA-455 Manuale utente

PaloAlto Networks

PaloAlto Networks ION 9200 Manuale utente

PaloAlto Networks

PaloAlto Networks ION 9200 Guida all'applicazione

PaloAlto Networks

PaloAlto Networks TECHDOCS ION 1200 Manuale utente

PaloAlto Networks

PaloAlto Networks PA-400R Series Guida all'applicazione

PaloAlto Networks

PaloAlto Networks ION 3200 Guida all'applicazione

PaloAlto Networks

PaloAlto Networks M-200 Manuale utente

PaloAlto Networks

PaloAlto Networks ION 5200 Guida all'applicazione

PaloAlto Networks

PaloAlto Networks PA-450R Manuale utente

PaloAlto Networks

PaloAlto Networks PA-5420 Manuale utente

PaloAlto Networks

PaloAlto Networks ION 1200-C-5G-WW Manuale utente

PaloAlto Networks

PaloAlto Networks M-500 Manuale utente

PaloAlto Networks

PaloAlto Networks PA-5400 Series Manuale utente

PaloAlto Networks

PaloAlto Networks PA-5400 Series Manuale utente

PaloAlto Networks

PaloAlto Networks WF-500-B Guida all'applicazione

PaloAlto Networks

PaloAlto Networks PA-400 Series Manuale utente

PaloAlto Networks

PaloAlto Networks PA-7500 Manuale utente

PaloAlto Networks

PaloAlto Networks ION 3200 Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente