Panacom LP-8804 Manuale utente
Pg. 3
LP-8804 - USER MANUAL
ENGLISH
Thanks for purchasing Panacom Suitcase Turntable .Please read
this manual carefully before using this Turntable.
Description:
Pg. 4
1. Lock catch.
2. Plastic dust cover.
3. Adapter - Use this when playing 45rpm records with cut out centres.
4. Tonearm lift lever.
5. Turntable.
6. Auto stop control.
7. Speed selection - Three speed for choice: 33.3, 45, 78 rpm.
8. Lock ON and OFF/BT.
9. Needle.
10. Power switch.
11. Built-in stereo speaker.
12. Handle.
13. RCA output.
14. Socket for headphone to play iphone/ipod.
15. USB 5V DC power in socket.
16. USB slot.
17. SD slot.
Pg. 5
18. Skip Up button.
19. Play or pause button.
20. Skip down button.
21. Mode: to select FM radio/USB/SD or LP songs.
Initial Set-Up
Mains Connection
Ensure that the mains voltage of your home corresponds to the
operating voltage of the unit. Your unit is ready to be connected to a
mains voltage of 100-240V/50-60Hz.
Amplifier Connection (If Required)
Whilst you can listen to your new turntable using the built in
speakers you may also wish to connect it to your existing Hi Fi
system. To do that, connect the audio plugs to the AUX input on
your mixer or amplier using an RCA cable (not supplied)
• Red plug into R/H channel input.
• White plug into L/H channel input.
Playing a record
- Place the record of your choice on the turntable. If required, do not
forget to place the adaptor on the record spindle.
- Choose the desired playing speed using the speed selection
switch between 33.3, 45 and 78rpm.
- Turn on the Rotary Power Switch. Note: it also controls the volume.
- Release the tone arm lock.
- Raise the arm with your hand lightly.
- Place the stylus vertically over the rst track of the record, the
turntable will start turning automatically.
- Slowly put down the stylus on to the record to star playing.
- When a record comes to an end, the turntable will stop
automatically as long as the auto-stop switch is in the ON position.
Pg. 6
If the switch is in the off position then it will keep revolving until the
tone arm is returned to the tone arm rest.
- Lift up the tone arm and put it on the rest position when you have
nishes playing.
- Replace the protective cap on the stylus and close the tone arm lock.
- Turn off power at mains.
Listen to USB SD tracks
- Turn the volume knob in a clockwise direction to turn the
equipment on.
- Use the function selector to select USB mode.
- Insert the USB/SD card to correct slot.
- Wait for 6-10s, once the machine read the Total tracks ,will auto-
play the tracks.
- Press M button to convert USB/SD Tracks.(default for U-disc play)
- Press Play. re-pressed, pause.
- Press Next, play nexttrack.
- Press Play previous track.
- Keep Pressing Next for 3s, can enlarge the volume of source-disc.
- Keep pressing Prev for 3s, can reduce the volume.
Pg. 7
BT Connection Output function
- To connect BT Connection speakers via BT.
- Turn on the BT Connection speakers when the turntable is on,
and then turn BT Connection speakers to BT mode, then it will
connect directly.
- If cannot connect quickly, press the NO.3 BT connection reset
button once.
Selection of built-in speakers or output BT Connection speakers
- Turn the button of NO.6, can choose built-in speakers or BT speakers.
- When turn to off/turn up, it will play the built-in speakers.
- When turn to on/turn down, it will play the output BT
Connection speakers.
1) Push the arm lock to release the tone-arm.
2) Take off cap of the cartridge to expose the needle out.
3) Separate the cartridge from the socket lightly.
4) Take off the audio-line from the cartridges completely.
MAINTENANCE
Replacing the stylus
5-8) To t a new one just in opposite deals. Insert the audio-line
accordingly, and install the cartridge to the socket ligthly.
Pg. 8
NOTES:
We advise you to clean your records with an anti-static cloth to
preserve its quality.
For the same reason your stylus should be replaced periodically
(approximately every 250 hours)
Dust the stylus from time to time using a very soft brush soaked
in alcohol.
WHEN CARRYING YOUR RECORD PLAYER DO NOT FORGET TO:
• Replace the protective cap on the stylus.
• Put the rest clip into the pick-up arm.
Please exercise extreme care whilst performing this operation so
as to avoid the tone arm and audio line wires from any damage.
Features:
1. 33.3, 45 and 78 RPM turntable player
2. Built-in Speaker (2x1W RMS).
3. USB/SD playing.
4. 3.5mm earphone jack.
5. RCA Line out.
6. Rechargeable lithium battery.
7. BT connection Output.
Pg. 9
LP-8804 - MANUAL DE USUARIO
ESPAÑOL
Gracias por comprar la Bandeja giradiscos de Panacom. Lea este
manual cuidadosamente antes de usarla.
Pg. 10
DESCRIPCIÓN
1. Traba.
2. Cubierta antipolvo
3. Adaptador: utilícelo cuando reproduzca registros de 45rpm con
centros cortados.
4. Palanca de elevación del brazo.
5. Placa giratoria.
6. Control de parada automática.
7. Selección de velocidad: 33.3, 45, 78 rpm.
8. Botón de reajuste de Conexión BT.
9. Aguja.
10. Interruptor de encendido.
11. Altavoz estéreo incorporado.
12. Manija.
13. Salida RCA.
14. Entrada para auriculares.
15. Alimentación de 5V DC USB.
16. Entrada USB.
17. Entrada SD.
18. Botón Anterior.
19. Botón Reproducir o pausar.
20. Boton Siguiente.
21. Modo: para seleccionar canciones de USB / SD o LP.
INSTALACIÓN
Suministro de energía principal
Compruebe que el voltaje del suministro eléctrico local corresponda
con las especicaciones de la unidad. El giradiscos está preparado
para soportar un voltaje de 230V/50Hz.
Conexión a un amplificador (en caso de que sea necesario)
Si bien es posible reproducir la música y escucharla a través
de los parlantes incorporados, en caso de que quiera utilizar un
amplicador, puede conectarse a su sistema HI FI a través de un
cable RCA (no incluido).
• Conectar el cable rojo a la entrada de canal R/H.
• Conectar el cable blanco a la entrada de canal L/H.
Indice
Lingue:
Altri manuali Panacom Giradischi
