Panasonic AW-HHD870N Manuale utente

Operating Instructions

SDI Card

Model No. AW-HHD870N

Before operating this product, please read the instructions carefully and save this manual for future use.

VQTB0353

F0109S0 D

- 2 -

indicates safety information.

Safety precautions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (service) instructions in the

literature accompanying the appliance.

WARNING:

• TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPARATUS TO

RAIN OR MOISTURE.

• THE APPARATUS SHALL NOT BE EXPOSED TO

DRIPPING OR SPLASHING AND THAT NO

OBJECTS FILLED WITH LIQUIDS, SUCH AS

VASES, SHALL BE PLACED ON THE

APPARATUS.

CAUTION:

TO REDUCE THE RISK OF FIRE OR SHOCK

HAZARD AND ANNOYING INTERFERENCE, USE

THE RECOMMENDED ACCESSORIES ONLY.

CAUTION:

TO REDUCE THE RISK OF FIRE OR SHOCK

HAZARD, REFER CHANGES OF SWITCH

SETTINGS INSIDE THE UNIT TO QUALIFIED

SERVICE PERSONNEL.

- 3 -

This Class A digital apparatus complies with Canadian

ICES-003.

Cet appareil numérique de la class A est conforme à

la norme NMB-003 du Canada.

For CANADA

indicates safety information.

FCC Note:

This equipment has been tested and found to comply

with the limits for a class A digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference when the equipment is operated in a

commercial environment. This equipment generates,

uses, and can radiate radio frequency energy, and if

not installed and used in accordance with the

instruction manual, may cause harmful interference

to radio communications. Operation of this equipment

in a residential area is likely to cause harmful

interference in which case the user will be required to

correct the interference at his own expense.

Warning:

To assure continued FCC emission limit compliance,

the user must use only shielded interface cables when

connecting to external units. Also, any unauthorized

changes or modifications to this equipment could void

the user’s authority to operate it.

- 4 -

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding-

type plug has two blades and a third grounding

prong. The wide blade or the third prong are

provided for your safety. If the provided plug does

not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10) Protect the power cord form being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

11) Only use attachments/accessories specified by

the manufacturer.

12) Use only with the cart, stand, tripod,

bracket, or table specified by the

manufacturer, or sold with the

apparatus. When a cart is used, use

caution when moving the

cart/apparatus combination to avoid

injury from tip-over.

13) Unplug this apparatus during lightning storms or

when unused for long periods of time.

14) Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has

been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the

applicable safety instructions listed below. Keep these operating instructions handy for future reference.

IMPORTANT SAFETY INSTRUCTIONS

indicates safety information.

- 5 -

Contents

Preface ............................................................................... 5

Standard accessories ......................................................... 5

Warning/caution for safety .................................................. 6

Precautions ......................................................................... 7

Major operating controls and their functions ....................... 8

Mounting ............................................................................. 9

Connection ....................................................................... 11

Appearance ...................................................................... 12

Specifications ................................................................... 13

Preface

This product is an option card which can be installed in

the option slot of the AW-HE870 HD convertible camera.

It is made for HD-SDI/SD-SDI signal output and is

equipped with two BNC output jacks (dual channel).

AW-HE870 settings can be used to switch between

HD-SDI and SD-SDI output.

Zoom focus control of lenses equipped with a remote

control function possible from a AW-CB400 (or similar)

remote operation panel.

The AW-HHD870 can be installed only to the

AW-HE870.

Caution

Standard accessories

Screw (6 mm long) ............... 2 pcs

Screw (Black, 8 mm long) ..... 4 pcs

- 6 -

Warning/Caution for safety

WARNING

Refer all servicing to qualified personnel

To reduce the risk of electric shock, don’t remove cover

or back, unless you are a qualified personnel. Refer all

mountings, connections, servicing to qualified service

personnel.

No water or moisture inside

Do not let water or moisture into the product, or expose it

to moisture, to prevent a fire and electric shock.

If you see smoke or smell an odor from the product, if

water or other foreign matter gets inside, if it is damaged

by dropping, or if you find anything wrong with it,

immediately stop using it.

Do not disassemble or modify the product to prevent

a fire and electric shock.

CAUTION

Do not drop the product, do not expose it to strong shock,

or do not step on it, to prevent a fire and injuries.

Do not install the product at a place full of moisture and

dust, which may cause a fire and electric shock.

- 7 -

Precautions

Power off before connecting or disconnecting cables

Before plugging or unplugging the cables, be sure to

switch power off.

Handle carefully.

Do not drop the product, or subject it to strong shock or

vibration.This is important to prevent trouble.

Avoid humidity and dust.

Avoid using the product at a humid, dusty place because

much humidity and dust will cause damage to the parts

inside.

Operating temperature range

Avoid using the product at a cold place below 14 °F

(–10 °C) or at a hot place above 113 °F (+45 °C) because

extremely low or high temperature will adversely affect

the parts inside.

When the SDI card is to be discarded at the end of its

service life, ask a specialized contractor to dispose of

it properly in order to protect the environment.

Caution

- 8 -

Major operating controls and their functions

ZOOM/FOCUS connector

This is the standard input connector for the lenses

equipped with a remote control function for zoom focus.

When using a Panasonic pan-tilt head (such as the

AW-PH360, AW-PH400, AW-PH405 or AW-PH650), use

the LENS I/F connector on the pan-tilt head instead of

this connector.

SDI output connector [SDI OUT1, 2]

Serial digital component signal can be output.

- 9 -

Mounting

Be sure to ask your store, where you purchased the

product, for mounting.

Disconnect the camera power connector before

mounting.

Before handling the card, touch a metal part of the

camera to discharge the static from the human body.

An anti-static wrist strap is recommended for added

safety.

If you touch the card while you are still charged with

static, it may cause trouble.

Keep the metal parts of the card free of contact with

other metal parts.

Caution 1Switch the camera off, and disconnect the power

connector and other cables from the camera.

2Loosen the four screws on the rear of the camera and

remove the rear panel.

3Loosen the two screws for the option card slot and

remove the cover.

4Insert the SDI card along the guide rail at the bottom of

the camera and the tab above. Insert it securely all the

way.

5Tighten the two card setscrews securely.

If you have lost the screws, use the screws (6 mm long)

supplied as accessories.

6Fasten the rear panel with the four screws.

If you have lost the screws, use the screws (Black, 8 mm

long) supplied as accessories.

7Plug the cables back as necessary, connect the power

connector, then switch power on.

- 10 -

Rear panel

Option card slot

cover

Card setscrews

(6 mm) Rear panel

setscrews

(8 mm)

SDI card

Indice

Altri manuali Panasonic Hardware per computer

Panasonic

Panasonic UP0KG8DG Manuale utente

Panasonic

Panasonic MANV250GE Manuale utente

Panasonic

Panasonic 2SC2406 Manuale utente

Panasonic

Panasonic 2SA2174J Manuale utente

Panasonic

Panasonic 2SA2021G Manuale utente

Panasonic

Panasonic ET-MDN12G10C Manuale utente

Panasonic

Panasonic AW-360B10 Manuale utente

Panasonic

Panasonic 2SA2028 Manuale utente

Panasonic

Panasonic FP7 Series Manuale utente

Panasonic

Panasonic CZ-CBPCC2 Manuale utente

Panasonic

Panasonic DV0PM20105 Manuale utente

Panasonic

Panasonic 2SA1532 Manuale utente

Panasonic

Panasonic CF-BAL1024U Manuale utente

Panasonic

Panasonic UP05C8PG Manuale utente

Panasonic

Panasonic AV-HS04M4 Manuale utente

Panasonic

Panasonic WJ-NDB301 Manuale utente

Panasonic

Panasonic WJ-PB85D01 Manuale utente

Panasonic

Panasonic TY-SB01F Manuale utente

Panasonic

Panasonic 2SB1320A Manuale utente

Panasonic

Panasonic AW-HHD100N Manuale utente

Panasonic

Panasonic ET-MDNDP10C Manuale utente

Panasonic

Panasonic UP0KG8D Manuale utente

Panasonic

Panasonic TY-42TM6B - Monitor Terminal Expansion Board Guida utente

Panasonic

Panasonic 2SA2078 Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente

Advantech

Advantech ASMB-935 Series Manuale utente