Panasonic EY7549 Manuale utente

distribution is a violation of law.

Order Number PTD1301X19CE

Cordless Multi- Impact & Drill Driver

Model No. EY7549

Europe

Oceania

TABLE OF CONTENTS

PAGE PAGE

1 Warning -------------------------------------------------------------- 2

2 Specifications ----------------------------------------------------- 2

3 Troubleshooting Guide ----------------------------------------- 3

4 Disassembly and Assembly Instructions ---------------- 8

5 Wiring Connection Diagram ---------------------------------15

6 Schematic Diagram ---------------------------------------------15

7 Exploded View and Replacement Parts List -----------16

1Warning

Caution:

• Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70°F (30 - 40°C) higher. Please

use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder-

ing iron, please be careful not to heat too long.

• Pb free solder will tend to splash when heated too high (about 1100°F / 600°C).

2 Specifications

3 Troubleshooting Guide

3.1. Troubleshooting Guide

3.2. Trial Operation (After Checking Troubleshooting Guide)

3.2.1. Assembly

• Confirm if there is no gap between housing A and B by pinching lead wires.

• Confirm all screws are tightened firmly.

3.2.2. Operation

• Check whether the tool operates properly in both the forward and reveres directions.

• Check whether the LED light turns on and off each time the LED light on/off button is depressed.

• Check whether the tool speed increases continuously as the trigger is gradually engaged.

• Check whether the tool speed is normal after repair and reassembly.

*Please refer to the specifications on page 2.

• Check whether the tool may become hot in a short operation.

• Set the clutch handle to the mark and check whether the tool rotates without any clutch operation.

• Pull the trigger all the way back and check whether the tool stops rotating immediately when it is released.

• Rotate the clutch handle and check whether the clutch switches properly.

• Check whether impact operation functions properly.

3.2.3. Integrity

• With the switch activated, shake the tool back and forth and up and down and verify that its sound does not change excessively.

• Check for the presence of any dirt or foreign matter from the repair process on the outside of the tool.

4 Disassembly and Assembly Instructions

*To assemble the tool, start with 4-12 and proceed to 4-1

4.1. Removing the plate hook

4.2. Removing the Fixation cover assembly

4.3. Removing the housing

4.4. Removing the switch assembly

4.5. Removing the Module assembly

Altri manuali per EY7549

Indice

Altri manuali Panasonic Utensili elettrici

Panasonic

Panasonic AccuPulse QP Low Noise Series Manuale utente

Panasonic

Panasonic EYFMH1WC Manuale utente

Panasonic

Panasonic 4541OLOA Manuale utente

Panasonic

Panasonic EY75A8 Manuale utente

Panasonic

Panasonic EY3610 Manuale utente

Panasonic

Panasonic EY3610 Manuale utente

Panasonic

Panasonic EY3640 Manuale utente

Panasonic

Panasonic EY4541 Manuale utente

Panasonic

Panasonic EY4541 Manuale utente

Panasonic

Panasonic EYFLA4A Manuale utente

Panasonic

Panasonic EYFMA1B Manuale utente

Panasonic

Panasonic EYFPA1J Manuale utente

Panasonic

Panasonic EY4541 Manuale utente

Panasonic

Panasonic EY3640 Manuale utente

Panasonic

Panasonic EYFLA5A Manuale utente

Panasonic

Panasonic EY74A2X Manuale utente

Panasonic

Panasonic EY7552X57 Manuale utente

Panasonic

Panasonic EY7541 - CORDLESS IMPACT WRENCH Manuale utente

Panasonic

Panasonic 7552LJ Manuale utente

Panasonic

Panasonic EYFLC1A Manuale utente

Panasonic

Panasonic EY7550LR2S Manuale utente

Panasonic

Panasonic EYFLA4A Manuale utente

Panasonic

Panasonic EY46A5 Manuale utente

Panasonic

Panasonic EYFLA9C Manuale utente

Manuali Utensili elettrici popolari di altre marche

AEG

AEG OMNI-JS Manuale utente

SIP

SIP 01533 Manuale utente

Ribimex

Ribimex PRS499 Manuale utente

3M Fiber Optic Connector Crimp Tool Manuale utente

Ryobi

Ryobi P524 Manuale utente

ROJEK

ROJEK FSN 300A Manuale utente

Kemper

Kemper 1740PRO Manuale utente

WABCO

WABCO OptiTire Manuale utente

EINHELL

EINHELL TE-MS 18/210 Li Manuale utente

Orgapack

Orgapack OR-T 85 Guida rapida

TOUGHCUT

TOUGHCUT Diamond 400 Manuale utente

Yaros

Yaros PB-3603 Manuale utente

Fein

Fein BSS 2.0 E Guida all'installazione

Baileigh Industrial

Baileigh Industrial SS-2725 Manuale utente

Milwaukee

Milwaukee 2674-20 Manuale utente

Fein

Fein BLs 1.6 Manuale utente

Princess

Princess Electric Multi Sharpener Manuale utente

FOREDOM

FOREDOM K.1050 Manuale