Panasonic EYFLA9C Manuale utente

© Panasonic corporation 2019. All rights reserved.

Unauthorized copying and distribution is a violation

of law.

Order Number PTD1902E58CE

Cordless Impact Wrench

Model No. EYFLA9C

Model No. EYFMA2C

Model No. EYFLA9P

Model No. EYFMA2P

Europe

TABLE OF CONTENTS

PAGE PAGE

1 Warning -------------------------------------------------------------- 2

2 Specifications ----------------------------------------------------- 2

3 Troubleshooting Guide ----------------------------------------- 3

4 Disassembly and Assembly Instructions ---------------- 6

5 Exploded View and Replacement Parts List -----------12

2

1Warning

Caution:

• Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70°F (30 - 40°C) higher. Please

use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder-

ing iron, please be careful not to heat too long.

• Pb free solder will tend to splash when heated too high (about 1100°F / 600°C).

2 Specifications

3

3 Troubleshooting Guide

3.1. Troubleshooting Guide

4

5

3.2. Trial Operation (after checking Troubleshooting Guide).

3.2.1. Assembly

• Confirm if there is no gap between housing A and B by pinching lead wires.

• There is no dust or deformation on battery terminals.

3.2.2. Operation

• Check whether the tool speed increases continuously as the trigger is gradually engaged.

• Check whether the tool operates properly in both the forward and reveres directions.

• Set the LED light to switch-linked mode (L2) and check whether the LED light turns on when the trigger is engaged and that it

turns off when the trigger is released.

• Set the buzzer to each of its three modes and verify that there is no buzzer in b0 mode, that the buzzer sounds when the green

lamp is on in b1 mode, and that the buzzer sounds when the Red lamp is on b2 mode.

• Check whether the ID setting has been properly configured after repair and reassembly.

[ Method of confirmation ]

1. Press D button on the remote control

2. Confirm the operation panel display

• Initializing all settings (revert settings to factory defaults).

[ Setting method ]

6

4 Disassembly and Assembly Instructions

* To reduce the risk of injury, always remove battery pack before removing/installing the tool.

* To assemble the tool, start with 4-8 and proceed to 4-1

4.1. How to remove the Driving shaft assembly and Shaft cover assembly.

4.2. How to remove the Thrust plate and Anvil.

7

4.3. How to remove the Housing B.

4.4. How to remove the Interior components.

8

4.5. How to remove the Module assembly.

9

4.6. Checking and setting the Module assembly’s DIP switches.

4.7. How to remove the Motor mounting plate assembly.

10

4.8. How to remove the Driving shaft assembly.

Questo manuale è adatto per i seguenti modelli

3

Indice

Altri manuali Panasonic Utensili elettrici

Panasonic

Panasonic EY4541 Manuale utente

Panasonic

Panasonic EY3610 Manuale utente

Panasonic

Panasonic EY3640 Manuale utente

Panasonic

Panasonic EY3610 Manuale utente

Panasonic

Panasonic EYFMA1B Manuale utente

Panasonic

Panasonic EY4541 Manuale utente

Panasonic

Panasonic EYFPA1C Manuale utente

Panasonic

Panasonic EY4541 Manuale utente

Panasonic

Panasonic 4541OLOA Manuale utente

Panasonic

Panasonic EY75A8 Manuale utente

Panasonic

Panasonic EY4541 Manuale utente

Panasonic

Panasonic EYFEA1N Istruzioni operative

Panasonic

Panasonic EY4542 - CIRCULAR SAW 14.4V Manuale utente

Panasonic

Panasonic EY46A5 Manuale utente

Panasonic

Panasonic EY7549 Manuale utente

Panasonic

Panasonic EYFPA1C Manuale utente

Panasonic

Panasonic EY4550 Manuale utente

Panasonic

Panasonic EY75A8 Manuale utente

Panasonic

Panasonic EYFLA5A Manuale utente

Panasonic

Panasonic AccuPulse QP Low Noise Series Manuale utente

Panasonic

Panasonic EY4541X57 Manuale utente

Panasonic

Panasonic EY7552X57 Manuale utente

Panasonic

Panasonic EY46A5 Manuale utente

Panasonic

Panasonic EYFLC1A Manuale utente

Manuali Utensili elettrici popolari di altre marche

AEG

AEG OMNI-JS Manuale utente

SIP

SIP 01533 Manuale utente

Ribimex

Ribimex PRS499 Manuale utente

3M

3M Fiber Optic Connector Crimp Tool Manuale utente

Ryobi

Ryobi P524 Manuale utente

ROJEK

ROJEK FSN 300A Manuale utente

Kemper

Kemper 1740PRO Manuale utente

WABCO

WABCO OptiTire Manuale utente

EINHELL

EINHELL TE-MS 18/210 Li Manuale utente

Orgapack

Orgapack OR-T 85 Guida rapida

TOUGHCUT

TOUGHCUT Diamond 400 Manuale utente

Yaros

Yaros PB-3603 Manuale utente

Fein

Fein BSS 2.0 E Guida all'installazione

Baileigh Industrial

Baileigh Industrial SS-2725 Manuale utente

Milwaukee

Milwaukee 2674-20 Manuale utente

Fein

Fein BLs 1.6 Manuale utente

Princess

Princess Electric Multi Sharpener Manuale utente

FOREDOM

FOREDOM K.1050 Manuale