Panasonic AK-HRP1015G Manuale utente

DVQP2701ZAW1121AM0 -PS

ENGLISH

For details of operating Remote Operation Panel AK-HRP1015G, please

visit the Panasonic website (https://pro-av.panasonic.net/manual/en/index.

html), and refer to the Operating Instructions (HTML or PDF).

Read this document when using the AK-HRP1015G Remote Operation Panel in

conjunction with AG-CX350 Memory Card Camera-Recorder.

Operating Guide

Remote Operation Panel

Model No. AK-HRP1015G

Connecting the Unit to AG-CX350 Cameras 3

Connections 3

Compatible Functions List 4

ROP Menu (during AG-CX350 Connection) 8

ROP menu list 8

01 SCENE 13

02 SHUTTER SPEED 14

03 FILTER 14

04 PEDESTAL 15

05 CHROMA 15

06 GAIN 16

07 COLOR TEMP 16

08 WHITE BALANCE 17

09 GAMMA 18

10 KNEE 19

11 WHITE CLIP 20

12 DRS 20

13 DETAIL 21

14 SKIN TONE DTL 22

15 MATRIX 23

16 COLOR CORRECTION 24

17 IRIS RELATIVE 26

18 SYSTEM CAM 27

19 CAMERA MENU CONTROL 27

20 ROP SETTING 28

21 CONNECT SETTING 28

22 ROP IP SETTING 29

23 CAMERA IP SETTING 29

24 AUTO IRIS SETTING 29

25 SWITCHER LINK 29

26 AW CONTROLLER LINK 29

- 2 -

Table of Contents

Connecting the Unit to AG-CX350 Cameras

Connections

Use a LAN cable to connect the <REMOTE> connector at the rear of the AG-CX350 to the <LAN> connector of the AK-

HRP1015G.

Set the connection setting to “LAN(AG)” in the [CONNECT SETTING] menu.

ヒチバチヒヘ

ヤヰワワユヤヵチヴユヵヵリワヨロモワドモヨナワヰワワヰワワヰワワヰワワヰワヤモヮヒヤモヮピヤモヮプヤモヮフヤモヮブヤモヮビヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナ

- 3 -

Connecting the Unit to AG-CX350 Cameras

Compatible Functions List

When the unit is used in conjunction with an AG-CX350 Memory Card Camera-Recorder, a portion of the unit’s button, dial, and other con-

trol functions will be limited or disabled. Be sure to refer to the following table.

Front panel 1

Front panel 2

Front panel 3

Front panel 4

Front panel 5

Front panel 6

Number Part name

✓: Enabled

×: Disabled

Remarks

Front panel 1

[PANEL LOCK] button ✓

[AUTO] button ✓This does not function when the auto setup setting

is enabled.

[BARS] button ✓Controls ON/OFF of color bar signal output.

[TALLY/CALL] lamp/button ✓Tally only operation is possible.

[REF. RECALL] button ✓Press and hold this to start/stop recording.

[FILES] button ✓Press and hold this to switch to the scene selection

menu.

[SETUP] button ✓

[AUTO IRIS] button ✓

Front panel 2

Function buttons ✓

LCD panel ✓

Menu operation dials ✓

- 4 -

Connecting the Unit to AG-CX350 Cameras

Number Part name

✓: Enabled

×: Disabled

Remarks

Front panel 3

[GAIN] button ✓When this is set to ON, the [GAIN] menu is dis-

played on the LCD panel.

[SHT] button ✓When this is set to ON, the [SHUTTER SPEED]

menu is displayed on the LCD panel.

[COLOR] button ✓The menus will switch with each press of the button.

[WHITE BALANCE] > [CHROMA] > [MATRIX] >

[COLOR CORRECTION] > Menu OFF (status

screen)

[FILTER] button ✓When this is set to ON, the [FILTER] menu is dis-

played on the LCD panel.

[GAMMA] button ✓When this is set to ON, the [GAMMA] menu is dis-

played on the LCD panel.

[FLARE] button ×

[KNEE] button ✓The menus will switch with each press of the button.

[KNEE] > [WHITE CLIP] > Menu OFF (status

screen)

[DTL] button ✓The menus will switch with each press of the button.

[DETAIL] > [SKIN TONE DTL] > Menu OFF (status

screen)

- 5 -

Connecting the Unit to AG-CX350 Cameras

Number Part name

✓: Enabled

×: Disabled

Remarks

Front panel 4

[GAIN], [TEMP], [GAMMA], [SKIN]

adjustment block

✓ When [GAIN] is lit

Adjusts the following.

Red (R) adjustment dial

[WHITE BALANCE] > [GAIN R]

Blue (B) adjustment dial

[WHITE BALANCE] > [GAIN B]

When [TEMP] is lit

Adjusts the following.

Red (R) adjustment dial

[COLOR TEMP] > [GAIN R]

Green (G) adjustment dial

[COLOR TEMP] > [AXIS G]

Blue (B) adjustment dial

[COLOR TEMP] > [GAIN B]

When [GAMMA] is lit

Adjusts the following.

Green (G) adjustment dial

[GAMMA] > [MASTER GAMMA]

When [SKIN] is lit

Adjusts the following.

Red (R) adjustment dial

[SKIN TONE DTL] > [I CENTER]

Green (G) adjustment dial

[SKIN TONE DTL] > [Q WIDTH]

[PED], [FLARE], [B.GAM] adjustment

block

✓ When [PED] is lit

Adjusts the following.

Red (R) adjustment dial

[PEDESTAL] > [PED R]

Green (G) adjustment dial

[PEDESTAL] > [MASTER PED]

Blue (B) adjustment dial

[PEDESTAL] > [PED B]

When [FLARE] is lit

FLARE cannot be controlled. “-” is displayed.

When [B.GAM] is lit

Adjusts the following.

Green (G) adjustment dial

[GAMMA] > [BLACK GAMMA]

Blue (B) adjustment dial

[GAMMA] > [B.GAMMA RANGE]

- 6 -

Connecting the Unit to AG-CX350 Cameras

Number Part name

✓: Enabled

×: Disabled

Remarks

Front panel 5

[ALM] indicator ✓

[OPT] indicator ×

[EXT] indicator ×

[D.EXT] indicator ×

Adjustment value display ✓Displays the adjustment values except for CC.

When the [SHT] indicator and [SYNC] indicator

are lit

Displays the following.

Fixed shutter is selected (dot lights at bottom

right)

Numerical value for the denominator of the

shutter speed

Synchro scan (time display) is selected

Numerical value for the denominator of the

shutter speed (when the value is four or

more digits, the digits after the decimal point

are not displayed)

Synchro scan (shutter open angle display) is

selected

Setting value of shutter open angle

[ND] indicator ✓Displayed only. Cannot be adjusted.

[CC] indicator ✓Lights but “-” is displayed. Cannot be adjusted.

[IRIS] indicator ✓

[GAIN] indicator ✓

[PED] indicator ✓

[SHT] indicator ✓

[SYNC] indicator ✓

[DISP] button ✓

[UP (FREE)] button ✓

[DOWN (CHARA)] button ✓

[LOCK] indicator ✓

[SEL] dial ✓

Front panel 6

Memory card slot ✓

Memory card access indicator ✓

Camera number/tally display ✓

[IRIS RELATIVE] button ✓

Torque adjustment screw ✓

IRIS lever ✓

Master pedestal dial ✓

[PREVIEW] button ×

- 7 -

Connecting the Unit to AG-CX350 Cameras

ROP Menu (during AG-CX350 Connection)

ROP menu list

When an AG-CX350 Memory Card Camera-Recorder is connected, the ROP menu will be as follows. For setting values related to the cam-

era, refer to the Operating Instructions for the camera.

For details on menu operations, refer to the following sections in the Operating Instructions.

“Displaying menus”

“Basic menu operations”

NOTE

To perform menu operations, upgrade the version of the unit system to 2.10-00-0.00 or later.

The setting values of functions that are not supported are indicated as “－”.

01 SCENE

SCENE1 “SCENE1” (see page 13)

SCENE2 “SCENE2” (see page 13)

SCENE3 “SCENE3” (see page 13)

SCENE4 “SCENE4” (see page 13)

SCENE5 “SCENE5” (see page 13)

SCENE6 “SCENE6” (see page 13)

02 SHUTTER SPEED

SHUTTER “SHUTTER” (see page 14)

SPEED MODE “SPEED MODE” (see page 14)

SYNC TYPE “SYNC TYPE” (see page 14)

SPEED “SPEED” (see page 14)

AUTO SHUTTER “AUTO SHUTTER” (see page 14)

AUTO SHUTTER LIMIT “AUTO SHUTTER LIMIT” (see page 14)

AUTO SHUTTER POINT “AUTO SHUTTER POINT” (see page 14)

03 FILTER

ND “ND” (see page 14)

CC “CC” (see page 14)

04 PEDESTAL

M.PED “M.PED” (see page 15)

OFFSET “OFFSET” (see page 15)

PED R “PED R” (see page 15)

PED G “PED G” (see page 15)

PED B “PED B” (see page 15)

05 CHROMA

LEVEL % “LEVEL %” (see page 15)

PHASE “PHASE” (see page 15)

06 GAIN

GAIN “GAIN” (see page 16)

AGC “AGC” (see page 16)

AGC LIMIT “AGC LIMIT” (see page 16)

AGC POINT “AGC POINT” (see page 16)

07 COLOR TEMP

COLOR TEMP “COLOR TEMP” (see page 16)

GAIN R “GAIN R” (see page 16)

AXIS G “AXIS G” (see page 16)

GAIN B “GAIN B” (see page 16)

- 8 -

ROP Menu (during AG-CX350 Connection)

08 WHITE BALANCE

W.BAL SELECT “W.BAL SELECT” (see page 17)

GAIN OFFSET “GAIN OFFSET” (see page 17)

GAIN R “GAIN R” (see page 17)

GAIN B “GAIN B” (see page 17)

ATW SPEED “ATW SPEED” (see page 17)

ATW TARGET R “ATW TARGET R” (see page 17)

ATW TARGET B “ATW TARGET B” (see page 17)

09 GAMMA

MODE “MODE” (see page 18)

GAMMA “GAMMA” (see page 18)

F-REC DYNMC LV “F-REC DYNMC LV” (see page 18)

F-REC BLK.S LV “F-REC BLK.S LV” (see page 18)

V-REC K.SLOPE “V-REC K.SLOPE” (see page 18)

V-REC K.POINT “V-REC K.POINT” (see page 18)

BLACK GAMMA “BLACK GAMMA” (see page 18)

B.GAMMA RANGE “B.GAMMA RANGE” (see page 18)

10 KNEE

MODE “MODE” (see page 19)

POINT “POINT” (see page 19)

SLOPE “SLOPE” (see page 19)

A.KNEE RSPNS “A.KNEE RSPNS” (see page 19)

HLG KNEE SW “HLG KNEE SW” (see page 19)

HLG KNEE POINT “HLG KNEE POINT” (see page 19)

HLG KNEE SLOPE “HLG KNEE SLOPE” (see page 19)

H.COLOR SW “H.COLOR SW” (see page 19)

11 WHITE CLIP

WHITE CLIP SW “WHITE CLIP SW” (see page 20)

WHITE CLIP LEVEL(%) “WHITE CLIP LEVEL(%)” (see page 20)

12 DRS

DRS “DRS” (see page 20)

EFFECT DEPTH “EFFECT DEPTH” (see page 20)

13 DETAIL

DTL “DTL” (see page 21)

CORING “CORING” (see page 21)

V.DTL LEVEL “V.DTL LEVEL” (see page 21)

FREQ. “FREQ.” (see page 21)

LEVEL DEPEND. “LEVEL DEPEND.” (see page 21)

KNEE APE LV “KNEE APE LV” (see page 21)

GAIN(+) “GAIN(+)” (see page 21)

GAIN(-) “GAIN(-)” (see page 21)

DTL SW “DTL SW” (see page 21)

14 SKIN TONE DTL

SKIN TONE DTL A “SKIN TONE DTL A” (see page 22)

SKIN TONE DTL B “SKIN TONE DTL B” (see page 22)

SKIN TONE DTL C “SKIN TONE DTL C” (see page 22)

DETECT TBL “DETECT TBL” (see page 22)

EFFECT “EFFECT” (see page 22)

I CENTER “I CENTER” (see page 22)

I WIDTH “I WIDTH” (see page 22)

Q WIDTH “Q WIDTH” (see page 22)

Q PHASE “Q PHASE” (see page 22)

- 9 -

ROP Menu (during AG-CX350 Connection)

15 MATRIX

TYPE “TYPE” (see page 23)

ADAPTIVE MATRIX “ADAPTIVE MATRIX” (see page 23)

R-G “R-G” (see page 23)

R-B “R-B” (see page 23)

G-R “G-R” (see page 23)

G-B “G-B” (see page 23)

B-R “B-R” (see page 23)

B-G “B-G” (see page 23)

16 COLOR CORRECTION

SAT R “SAT R” (see page 25)

PHASE R “PHASE R” (see page 25)

SAT R-R-Mg “SAT R-R-Mg” (see page 25)

PHASE R-R-Mg “PHASE R-R-Mg” (see page 25)

SAT R-Mg “SAT R-Mg” (see page 25)

PHASE R-Mg “PHASE R-Mg” (see page 25)

SAT Mg “SAT Mg” (see page 25)

PHASE Mg “PHASE Mg” (see page 25)

SAT Mg-B “SAT Mg-B” (see page 25)

PHASE Mg-B “PHASE Mg-B” (see page 25)

SAT B “SAT B” (see page 25)

PHASE B “PHASE B” (see page 25)

SAT B-Cy “SAT B-Cy” (see page 25)

PHASE B-Cy “PHASE B-Cy” (see page 25)

SAT Cy “SAT Cy” (see page 25)

PHASE Cy “PHASE Cy” (see page 25)

SAT Cy-G “SAT Cy-G” (see page 25)

PHASE Cy-G “PHASE Cy-G” (see page 25)

SAT G “SAT G” (see page 25)

PHASE G “PHASE G” (see page 25)

SAT G-Yl “SAT G-Yl” (see page 25)

PHASE G-Yl “PHASE G-Yl” (see page 26)

SAT G-Yl-Yl “SAT G-Yl-Yl” (see page 26)

PHASE G-Yl-Yl “PHASE G-Yl-Yl” (see page 26)

SAT Yl “SAT Yl” (see page 26)

PHASE Yl “PHASE Yl” (see page 26)

SAT Yl-Yl-R “SAT Yl-Yl-R” (see page 26)

PHASE Yl-Yl-R “PHASE Yl-Yl-R” (see page 26)

SAT Yl-R “SAT Yl-R” (see page 26)

PHASE Yl-R “PHASE Yl-R” (see page 26)

SAT Yl-R-R “SAT Yl-R-R” (see page 26)

PHASE Yl-R-R “PHASE Yl-R-R” (see page 26)

17 IRIS RELATIVE

SENSE Refer to the following section in the Operating Instructions.

“29 IRIS RELATIVE”

COARSE

RELATIVE

18 SYSTEM CAM

TALLY CONTROL “TALLY CONTROL” (see page 27)

TALLY INPUT “TALLY INPUT” (see page 27)

TALLY SIGNAL “TALLY SIGNAL” (see page 27)

TALLY CONT MD “TALLY CONT MD” (see page 27)

- 10 -

ROP Menu (during AG-CX350 Connection)

Altri manuali per AK-HRP1015G

Indice

Altri manuali Panasonic Telecomando

Panasonic

Panasonic EUR7722KN0 Manuale utente

Panasonic

Panasonic AK-HRP200G Manuale utente

Panasonic

Panasonic AW-CB400L Manuale utente

Panasonic

Panasonic CZ-RWSD2U Manuale utente

Panasonic

Panasonic WVRC37 - CAMERA ACC Manuale utente

Panasonic

Panasonic DMW-RSL1 Manuale utente

Panasonic

Panasonic TNQ2AE007 Manuale utente

Panasonic

Panasonic CZ-RE2C2 Manuale utente

Panasonic

Panasonic CZ-RWSK2 Manuale utente

Panasonic

Panasonic EUR511151C Manuale utente

Panasonic

Panasonic CZ-RTC3 Manuale utente

Panasonic

Panasonic WV-CU161 Manuale utente

Panasonic

Panasonic EUR501453 Manuale utente

Panasonic

Panasonic WV-RC700A Manuale utente

Panasonic

Panasonic CZ-RTC4A Manuale utente

Panasonic

Panasonic CZ-RTC6WBLW Manuale utente

Panasonic

Panasonic EUR511158 Manuale utente

Panasonic

Panasonic CZ-RWSU2N Manuale utente

Panasonic

Panasonic WH-0M1201A Manuale utente

Panasonic

Panasonic TX LXD6 Series Manuale utente

Panasonic

Panasonic EUR511170 Manuale utente

Panasonic

Panasonic CZ-RD514C Manuale di installazione e funzionamento

Panasonic

Panasonic CZ-01RT11P Manuale utente

Panasonic

Panasonic CZ-RTC3 Manuale utente

Manuali Telecomando popolari di altre marche

Bang & Olufsen

Bang & Olufsen Beo4 Manuale utente

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuale utente

Multiplex

Multiplex PROFI TX 9 Manuale utente

One Remote

One Remote RMB4 Manuale utente

FUTABA

FUTABA 9ZAP - PART2 Manuale utente

HR Matic

HR Matic HR MULTI 3 Manuale utente

Yamaha

Yamaha ACC-GNRST-30-20 Manuale utente

EisSound

EisSound KBSOUND Manuale utente

Marantz

Marantz RC101 Manuale utente

Conrad

Conrad FS20 TC6 Manuale utente

Anritsu

Anritsu MP1777A Manuale utente

Niles

Niles WVC100 Guida alla risoluzione dei problemi

RCA

RCA RCU1300 Manuale utente

Bang & Olufsen

Bang & Olufsen BEO6 Manuale utente

GE 94901 Manuale utente

Onbon

Onbon YQ1-75 Manuale utente

FUTABA

FUTABA R7108SB Istruzioni per l'installazione

Invacare

Invacare G91S Manuale utente