Panasonic Machine Vision GP-MF130 Manuale utente

Machine Vision B/W CCD Camera

GP-MF130

Before attempting to connect or operate this product,

please read these instructions completely.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

The lightning flash with arrow-

head symbol, within an equilat-

eral triangle, is intended to alert

the user to the presence of

uninsulated "dangerous volt-

age" within the product's enclo-

sure that may be of sufficient

magnitude to constitute a risk

of electric shock to persons.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). NO

USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

SA 1965

SA 1966

The exclamation point within an

equilateral triangle is intended to

alert the user to the presence of

important operating and mainte-

nance (servicing) instructions in the

literature accompanying the appli-

ance.

Warning:

This equipment generates and uses radio fre-

quency energy and if not installed and used

properly, i.e., in strict accordance with the

instruction manual, may cause harmful interfer-

ence to radio communications. It has been test-

ed and found to comply with the limits for a

Class A computing device pursuant to Subpart J

of Part 15 of FCC Rules, which are designed to

provide reasonable protection against such

interference when operated in a commercial

environment.

The serial number of this product may be found on

the top of the unit.

You should note the serial number of this unit in the

space provided and retain this book as a permanent

record of your purchase to aid identification in the

event of theft.

Model No.

Serial No.

Remove dust on the faceplate of filter glass

before mounting the lens on the camera.

CONTENTS

PREFACE ....................................................... 2

FEATURES ..................................................... 2

PRECAUTIONS .............................................. 3

MAJOR OPERATING CONTROLS AND

THEIR FUNCTIONS ........................................ 5

PREPARATIONS ............................................. 8

SYSTEM CONNECTIONS ............................... 9

EXTERNAL SYNCHRONIZATION .................. 10

PREVENTION OF BLOOMING AND SMEAR .. 10

SPECIFICATIONS ........................................... 11

OPTIONAL ACCESSORIES ............................. 12

- 1 -

- 2 -

PREFACE

The Panasonic GP-MF130 Machine Vision B/W

CCD Camera has a 1/3” Interline Transfer CCD

image sensor which features 380 000 pixels, a

horizontal resolution of 570 lines, and minimum

smear.

FEATURES

1. Newly developed multi-function solid state

image sensor 1/3” Inter Line Transfer type

CCD image sensor with 768 (H) x 494 (V)

pixels.

2. Selectable scanning system :

1-line interlace and 2-line interlace are avail-

able for the highest quality possible within

video processing.

3. External synchronization :

External HD/VD input enables system setup

with external video processors, etc.

4. High speed shutters up to 1/96 000 second

enabies to capture the moving objects.

- 3 -

4. Do not use the strong or abrasive

detergents when cleaning the camera

body.

Use a dry cloth to clean the camera when

dirty.

In case the dirt is hard to remove, use a

mild detergent and wipe gently.

5. Clean the CCD faceplate with care.

Do not clean the CCD with strong or abra-

sive detergents. Use lens tissue or a cotton

tipped applicator and ethanol.

6. Never face the camera towards the sun.

Do not aim the camera at bright objects.

Whether the camera is in use or not, never

aim at the sun or other extremely bright

objects. Otherwise, blooming or smear may

be caused.

PRECAUTIONS

1. Do not attempt to dissemble the camera.

To prevent electric shock, do not remove

screws or covers.

There are no serviceable parts inside. Ask a

qualified service person for servicing.

2. Handle the camera with care.

Do not abuse the camera. Avoid striking,

shaking, etc. The camera could be dam-

aged by improper handling or shortage.

3. Do not expose the camera to rain or

moisture, or try to operate it in wet areas.

This camera is designed for indoor use.

Turn the power off immediately and ask a

qualified service person for servicing.

Moisture can damage the camera and also

create the danger of electric shock.

- 4 -

7. Do not drop anything inside the camera.

Dropping metal for example inside the cam-

era could permanently damage the unit. If

anything is dropped inside the camera, turn

the power off immediately and ask a quali-

fied service person for servicing.

8. Do not operate the camera beyond the

specified temperature, humidity or power

source ratings.

Use the camera under conditions where

temperature is between −10°C - +50°C

(14°F - 122°F), and humidity is below 90 %.

The input power source is DC 12 V, 170 mA.

- 5 -

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

12P

VIDEO

130

OFF

1. 1/3” Manual Iris Lens (Sold Separately)

2. Camera Connector (12-pin)

This is connected with the optional Camera Cable GP-CA34 , GP-CA33, GP-CA59 or GP-CA60.

3. Pedestal Control

This controls the pedestal level from 0 mV to

100 mV.

4. Manual Gain Control

This controls the gain level from 0 to 6 dB. - 6 -

w!0i

e!1 u!2

rty

Pin No. Description

1 Ground

2 +12V IN

3 Ground for Video Out

4 Video Out

5 Ground for HD

6 HD IN

7 VD IN

8 Ground

9 No connection

10 No connection

11 No connection

12 Ground for VD

CAUTION: CONNECT

THIS TO A DC 12V

CLASS 2 POWER

SUPPLY ONLY.

5. Video Output Connector

This connector is used to connect with the

VIDEO IN connector of the monitor.

6. Switch 1 No.1 (1/ON) 1ON

This switch selects the Field or Frame

Accumulation.

ON : Field Accumulation

OFF: Frame Accumulation

7. Switch 1 No.2 (2/ON) 2ON

8. Switch 1 No.3 (3/ON) 3ON

9. Switch 1 No.4 (4/ON) 4ON

10. Switch 1 No.5 (5/ON) 5ON

These switches (Switch 1 No. 2, 3, 4, and 5)

are used to set the shutter speed.

Not Specified

- 7 -

The shutter speed can be set as below: 11. Switch 1 No.6 (6/ON) 6ON

This switch is not available for this model.

12. Switch 2 No.1 (1/ON) 1ON

Switch 2 No.2 (2/ON) 2ON

Switch 2 No.3 (3/ON) 3ON

Switch 2 No.4 (4/ON) 4ON

These switches are not available for this

model. Keep these switches at OFF posi-

tion.

13. Switch 2 No.5 (5/ON) 5ON

This switch turns on or off the termination for

HD signal with 75 Ω.

14. Switch 2 No.6 (6/ON) 6ON

This switch turns on or off the termination for

VD signal with 75 Ω.

Switch 1 Shutter Speed

No. 2 No. 3 No. 4 No. 5

OFF OFF OFF OFF

ON OFF OFF OFF

OFF ON OFF OFF

ON ON OFF OFF

OFF OFF ON OFF

ON OFF ON OFF

OFF ON ON OFF

ON ON ON OFF

OFF OFF OFF ON

ON OFF OFF ON

OFF ON OFF ON

Other Combinations

Normal

1/100

1/500

1/1 000

1/2 000

1/4 000

1/8 000

1/16 000

1/32 000

1/64 000

1/96 000

And to control the pedestal level or gain

level, remove the cover fixing screw on the

rear panel as shown below.

- 8 -

1. Power Supply for Camera

Prepare a regulated DC power supply

which can supply DC 12 V ±10 % DC 170

mA or more current and rated CLASS 2.

2. Lenses

Be sure to use the optional manual iris lens

having the following items.

Focus : Adjustable

Lens Weight : Less than 300 g(0.66 lbs.)

Note: If the lens is heavier than 300 g(0.66

lbs.), both the lens and the camera

should be secured by using the sup-

porter.

Mount : C-mount

The protrusion

at the rear of

the lens should

be as shown in

the illustration.

Less than 5/6" (Less than 8 mm)

3. Switch Covers Removal

Caution: The following preparation should

be made by qualified service person-

nel or system installers.

For setting the Switch 1 No.1 to 6 and 2 No.

1 to 6, remove the switch cover fixing screw

on the side panel as shown below.

PREPARATIONS

Remove this screw

12P

VIDEO

Remove

this screw

Altri manuali per Machine Vision GP-MF130

Indice

Altri manuali Panasonic Telecamera di sicurezza

Panasonic

Panasonic BB-HCM311 Istruzioni operative

Panasonic

Panasonic WVNP244 - COLOR CCTV CAMERA Manuale utente

Panasonic

Panasonic WVCL830 - COLOR CAMERA Manuale utente

Panasonic

Panasonic IDEHAL WV-SFN311L Manuale operativo

Panasonic

Panasonic BB-HCM311 Manuale utente

Panasonic

Panasonic Super Dynamic II WV-CS854B Manuale utente

Panasonic

Panasonic KX-HN1007 Manuale utente

Panasonic

Panasonic KX-HNC600 Manuale utente

Panasonic

Panasonic WVSF332 - IP NETWORK CAMERA Manuale utente

Panasonic

Panasonic BL-C210 Series Manuale utente

Panasonic

Panasonic BL-WV10 Manuale utente

Panasonic

Panasonic GPMF622 - MACHINE VISION CAMER Manuale utente

Panasonic

Panasonic WVBP554 - CCTV B/W CAMERA Manuale utente

Panasonic

Panasonic WV-SPN611 Manuale utente

Panasonic

Panasonic WV-X2251L Guida all'installazione

Panasonic

Panasonic WVNW474S - COLOR CCTV CAMERA Manuale utente

Panasonic

Panasonic WVNF302 - NETWORK CAMERA Manuale

Panasonic

Panasonic WV-NW502S Manuale utente

Panasonic

Panasonic WV-CF300L Series Manuale utente

Panasonic

Panasonic WV-X6531NEG Manuale utente

Panasonic

Panasonic WV-CP150E Manuale utente

Panasonic

Panasonic WVBF102 - CCTV CAMERA Manuale utente

Panasonic

Panasonic WV-SC385 Manuale utente

Panasonic

Panasonic WV-CF314LE Series Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente